Furniture of America CM3490SC-2PK User manual

1 / 7
MODEL #
CM3490SC-2PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
EASY DIFFICULT
The Assembly Rating is a
5 - point system showing the
level of effort needed to
assemble a specific product.
2 - People
Recommended
VERSION # 20-03-02

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
xx / XXXXXXXxx

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
xx / XXXXXXXxx

xx / XXXXXXXxx

SIDE CHAIR
CM 3490SC-2PK
Chair Back
JCBC Bolt M6 x 80MM
5 / 7
Allen Wrench
Seat Frame Front Leg Cushion Seat
JCBC Bolt M6 x 60MM JCBC Bolt M6 x 35MM CSK Screw M4 x 35MM
Spring Washer Flat Washer
PARTS
HARDWARE

6 / 7
ASSEMBLY INSTRUCTIONS
1
Part x1pc
Part x1pc
Hardware x4pcs
Hardware x2pcs
Hardware x6pcs
Hardware x6pcs
#1
#4
#G
#A
#E
#F
#G
#C
#E#F
2
Part x2pcs
Hardware x4pcs
Hardware x4pcs
Hardware x4pcs
#3
#G
#B#E
#F
#3
Align seat frame (#2) to the chair
back (#1), then secure two middle
holes by using bolts (#C) with
washers (#E,F).
Align seat frame (#2) to the chair back
(#1), then secure corner holes by
using bolts (#A) with washers (#E,F).
Align legs (#3) to the seat frame,
then secure by using bolts (#B)
with washers (#E,F).
#2

7 / 7
ASSEMBLY INSTRUCTIONS
3
Part x1pc
Hardware x3pcs
4
#D
#4
Secure seat cushion (#4) onto seat
frame by using screws (#D). There
will be no pre-drilled holes on the
seat cushion (#4).