Furniture of America CM3477RT-3PK User manual

MODEL #
CM3477RT-3PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 20-07-07
2 - People
(Included)
Allen Wrench
Recommended
1/ 8

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX8

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX8

4 / XXXXXXX8

DINNING TABLE SET
CM3477RT-3PK
#A 16pcs #B 8pcs #C 2pcs #D 26pcs
#E 26pcs #F 1pc
Flat washer Ø5/16"x 19mm Allen wrench4mm
Table Top Table Leg Chair Back Chair Seat
Chair Leg
#1 1pc #2 4pcs #3 2pcs #4 2pcs
#5 4pcs
Bolt Ø5/16"x 2-3/8" Bolt Ø5/16"x 3" Bolt Ø5/16"x 1-1/2" Lock washerØ5/16"
x 12mm
5/ 8

#1
#2 #4
#3
#5
#1
Part #1 x 1pc
ASSEMBLY INSTRUCTIONS
1
2
6 / 8
x2
Extend the wooden slats on the
bottom of the table (#1)

Part
Hardware
#2 x 4pcs
#E
#D
#A
#F
#2
#A x 8pcs
Hardware #D x 8pcs
Hardware #E x 8pcs
#2
#A #F
Part
Hardware
#4 x 2pcs
#A x 8pcs
Hardware #D x 8pcs
Hardware #E x 8pcs
Part #5 x 4pcs
3
4
ASSEMBLY INSTRUCTIONS
#5
#4
#E #D
7/ 8
x2
Align legs (#2) to the top (#1),
then secure by using bolts (#A)
with washers (#D,E).
Align chair legs (#5) to the seat (#4),
then secure by using bolts (#A) with
washers (#D,E).

ASSEMBLY INSTRUCTIONS
#C
#F
#D
#E
#3
Hardware #D x 2pcs
Hardware #E x 2pcs
Part #3 x 2pcs
Hardware #C x 2pcs
5
#F
#B
#D
#E
x2
Hardware #B x 8pcs
Hardware #D x 8pcs
Hardware #E x 8pcs
x2
6
8/ 8
Align seat to the chair back (#3), then secure
by using bolts (#C) with washers (#D,E).
Secure the corner holes of the seat to chair
back by using bolts (#B) with washers (#D,E).