Furniture of America CM3905RT User manual

1 / 9
MODEL #
CM3905RT
Questions?
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
(Included)
Allen Wrench
GIVE US A CALL: 1-888-980-5122
MON – FRI 8:30AM – 5:30PM (PT)
2 - People
Recommended
VERSION # 21-09-24

2 / 
Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING

3 /
PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
scratches and damages.

4 / 

ROUND DINING TABLE
CM3905RT
#1 1pc
Table Top
#A 4pcs
#E 16pcs
5 / 9
#B 24pcs
#F 16pcs
M6 x 13MM
Spring Washer
M6 x 25MM
Bolt
#2 4pcs
Inward Stretcher
with embedded Nut
#C 4pcs
M6 x 35MM
Bolt
#D 32pcs
M6 x 19MM
Flat Washer
#3 4pcs
#H 1pc
M4 Allen Wrench
#G 4pcs
M6 x 70MM
Bolt
M6 Adjuster
Base Leg
M6 x 14MM
Flat Washer
#4 4pcs
Table Leg
#5 2pcs
Mounting Plate
#6 2pcs
Upper Leg Base
#7 2pcs
Lower Leg Base
Outward Stretcher

CM3905RT is packed in 2 cases
Carton
CM3905RT - 1
Designation Part Hardware
CM3905RT - 2
#D x 32pcs
#E x 16pcs
#F x 16pcs
#G x 4pcs
#H x 1pc
6 / 9
#C x 4pcs
#B x 24pcs
#A x 4pcs
# 1
# 2
# 3
# 4
# 5
# 6
# 7
Table Top
Outward
Stretcher
Inward
Stretcher
Table Leg
Mounting Plate
Upper Leg
Base
Lower Leg
Base

ASSEMBLY INSTRUCTIONS
1
2
7 / 9
Hardware #D x10pcs
Hardware #E x8pcs
Hardware #F x2pcs
Hardware #H x1pc
Part #2 x2pcs
Part#2 xpc
Part#3 xpc
Part#4 xpcs
Hardware#A xpcV
Hardware#B xpcs
Hardware#D xpcs
Hardware#E xpcs
Hardware#F xpcV
Hardware#H xpc
#H
#B
#D
#E
#F
#D
#A
#H
Combine outward Stretcher (#2) together
with Inward Stretcher (#3), then secure by
using bolts (#A) then with washers (#D,F).
Next align the Table Leg (#4) to the assembly
stretcher secure by using bolts (#B) then
with washers (#D,E).
#4
#4
#2
#3
X2
#2
#2
#3
#3
#H
#B
#D
#E
Combine outward Stretcher (#2) together
with Inward Stretcher (#3), then secure by
using bolts (#A) then with washers (#D,F).
Next use assembly stretcher to the
assembly table leg then secure by using
bolts (#B) then with washers (#D,E)
Part #3 x2pcs
Hardware #A x2pcs
Hardware #B x8pcs
#3
#2
#F
#D
#A
#H
#2
#3
DO NOT TIGHTEN ALL
BOLTS UNTIL ALL PARTS ARE
COMPLETELY ASSEMBLED
DO NOT TIGHTEN ALL
BOLTS UNTIL ALL PARTS ARE
COMPLETELY ASSEMBLED

Hardware #C x4pcs
Hardware #D x4pcs
Hardware #F x4pcs
Hardware #H x1pc
#H
#C
#D
#F
Align the Lower Leg Base (#7)
to the Upper Leg Base (#6), then
secure by using bolts (#C) then
with washers (#D,F) in the Leg.
#7
#7
#6
#6
Part #6 x2pcs
Part #7 x2pcs
ASSEMBLY INSTRUCTIONS
3
Hardware #B x4pcs
8 / 9
Hardware #D x4pcs
Part #5 x2pcs
Hardware #F x4pcs
Hardware #H x1pc
Align the Mounting Plat (#5)
to the Table leg (#4) secure
by using bolts (#B) then with
washers (#D,F).
#F
#D
#B
#H
#5
#5
4
DO NOT TIGHTEN ALL
BOLTS UNTIL ALL PARTS ARE
COMPLETELY ASSEMBLED

ASSEMBLY INSTRUCTIONS
5
6
9 / 9
Hardware #G x4pcs
Hardware #B x4pcs
Hardware #D x4pcs
Hardware #F x4pcs
Hardware #H x1pc
#H
#B
#D
#F
#G
Part #1 x1pc
#1
Attach levelers
(#G) to the base.
Align base to top
(#1), then secure by
using bolts (#B) with
washers (#D,F).