Furniture of America CM5273-TV-72 User manual

Flat Washer

Insert the levelers (#D)
into the holes along the
bottom of the legs (#4).
Turn right to tighten.
Align the legs (#4) to the holes along the bottom of
the bottom frame (#2), then insert 3 bolts (#A)
into each leg and secure using the Allen wrench.

Align the support panels (#3) to the holes along the
corners of the bottom frame (#2), then insert 2 bolts
(#A) into each corner. Secure using the Allen wrench.
Slide the bottom glass (#6) down
onto the bottom frame (#2).

Place the top frame (#1) onto the top
of the support panels (#3), then insert
2 bolts (#A) into each corner. Secure.
Place the top glass (#5)
onto the top frame (#1).

1. Align the back glass (#7) to
the holes along the back,
then insert the bolts (#B)
with flat washers (#E) into
each hole and secure.
2. Lift the glass to apply a
nut (#C) into the other
ends of each bolt.
ASSEMBLY IS COMPLETED