Furniture of America Petersburg CM3185PC-2PK User manual

I. Align the seat cushion (#2) to the pre-drilled hole on the chair back (#1).
II. Prepare a bolt assembly by FIRST inserting the lock washer (#D) onto the bolt (#C) then the
flat washer (#E) onto that same bolt (#C). Insert into the center hole of the seat cushion and
secure using the Allen wrench (#G).
Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#A) then the
flat washer (#E) onto that same bolt (#A). Insert into the corner holes of the seat cushion and
secure using the Allen wrench (#G).

I. Align the front legs (#3) to the pre-drilled holes located on the front of the seat cushion (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then the
flat washer (#E) onto that same bolt (#B). Secure using the Allen wrench (#G).
Note: Insert left/right/front
stretchers as the legs are
assembled.
*Left and right are determined by facing
the front of the chair in an upright position.
Insert 6 wood screws (#F) into the pre-drilled holes along the sides of the stretchers.
Secure using the Phillips screwdriver.
ASSEMBLY IS COMPLETED
#F