Furniture of America Hoople Trundle CM-BK963 User manual

MODEL #
CM-BK963
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
(Included)
Allen Wrench
Phillips
Screwdriver
(Not Included)
VERSION # 20-12-11
1 / 15
3 - People
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 15

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 15

4 / 15

BUNK BED
CM-BK963
#1 1pc #2 1pc
#3 1pc #4 1pc
#5 1pc #6 1pc
#7 1pc #8 1pc
#9 2pcs
#10 2pcs #11 2pcs #12 2pcs
#13 1pc #14 1pc #15 5pcs #16 1set
Lower End Guardrail(R) Lower End Guardrail(L) Lower Back Side Rail Lower Front Side Rail
Upper End Guardrail(R) Upper End Guardrail(L) Upper Front Side Rail Upper Back Side Rail
Back Guardrail Guardrail Support Guardrail Support Front Guardrail
Ladder Rail (L) Ladder Rung Top Slat (14pcs)Ladder Rail (R)
5 / 15

#A 4pcs #B 16pcs #C 16pcs #D 4pcs
#E 10pcs #F 24pcs #G 4pcs
#17 1set #18 2pcs
#H 8pcs
#I 56pcs #J 1pcs
Bottom Slat (14pcs) Support Leg
Dowel Ø10 x 1-5/8" Bolt Ø1/4 x 2-3/4" Hanger Nut Ø1/4 Screw Ø6.5 x 3-1/8"
Screw Ø6.5 x 2" Screw Ø1/4" x 1-3/16" Connection nut
Ø10 x 3-18"
Bolt Ø1/4" x 1"
Screw #4 x 30mm Allen Key 4mm
6 / 15

#10
#9
#8
#16
#5
#6 #7
#11
#11
#1
#2
#3
#17 #4
#18
#18
#14
#13
#15
#12
Exploded View
7 / 15

#1
Carton Disignation Part Hardware
CM-BK963-1
CM-BK963 is packed in 3 cases
#A x 4pcs
Lower End Guardrail(R)
Lower End Guardrail(L)
Lower Back Side Rail
Lower Front Side Rail
Upper End Guardrail(R)
Upper End Guardrail(L)
Upper Front Side Rail
Upper Back Side Rail
Back Guardrail
Guardrail Support
Guardrail Support
Front Guardrail
Ladder Rail (L)
Ladder Rung
Top Slat (14pcs)
Ladder Rail (R)
Bottom Slat (14pcs)
Support Leg
#2
#5
#6
CM-BK963-2
#3
#4
#7
#8
#9
#10
#11
#12
#13
#14
#15
#18
#16
#17
CM-BK963-3
CM-BK963-2
#B x 16pcs
#C x 16pcs
#D x 4pcs
#E x 10pcs
#F x 24pcs
#G x 4pcs
#H x 8pcs
#I x 56pcs
#J x 1pc
8 / 15

ASSEMBLY INSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x1pc
Hardware #B x8pcs
Hardware #C x8pcs
Hardware #G x4pcs
Hardware #H x4pcs
Part #3 x1pc
Part #4 x1pc
#3
#4
#1
#2
#B
#B
#J
#C
#G
#H
#J
#2
#1
9 / 15
Align lower end guardrails
(#1,2) to the lower front and
back side rails (#3,4), then
secure by using bolts (#B)
onto hanger nuts (#C).
Align connection nuts (#G) to end guardrails (#1,2),
then secure by using bolts (#H).

ASSEMBLY INSTRUCTIONS
3
4
Part #5 x1pc
Part #6 x1pc
Hardware #A x4pcs
Hardware #B x8pcs
Hardware #C x8pcs
Part #7 x1pc
Part #8 x1pc
Hardware #F x4pcs
Part #9 x2pcs
Hardware #D x4pcs
#B
#B
#J
#C
#A
#D
#J
#5
#6
#7
#8
#9
Part #11 x2pcs
#11
#11
#F
#J
10 / 15
Insert dowels (#A) to upper end guardrails (#5,6),
then secure back guardrails (#9) to upper end
guardrails (#5,6) by using screws (#D).
Align upper front and back side rails (#7,8)
to the upper end guardrails (#5,6), then
secure by using bolts (#B) onto hanger
nuts (#C).
Align guardrail supports (#11) to
front side rail, then secure by using
bolts (#F).

ASSEMBLY INSTRUCTIONS
5
6
Part #12 x2pcs
Hardware #F x8pcs
#12
#F
#J
Part #10 x2pcs
Hardware #F x6pcs #F
#J
#10
#10
11 / 15
Align front guardrails (#12) to the support, then
secure by using bolts (#F).
Align supports (#10) to the back
rails, then secure by using bolts (#F).

ASSEMBLY INSTRUCTIONS
7
8
Hardware #H x4pcs
Hardware #E x10pcs
#H
#J
#1
#2
#5
#6
Part #13 x1pc
Part #14 x1pc
Part #15 x5pcs
#14
#13
#E
#E
#15
#J
#J
12 / 15
Align upper bunk to lower bunk, then secure by
using bolts (#H).
Align ladder rungs (#15) to ladder
rails (#13,14), then secure by using
screws (#E).

ASSEMBLY INSTRUCTIONS
9
10
Hardware #F x4pcs
#F
#J
Hardware #I x56pcs
Part #16 x1set
Part #17 x1set
#I
#16
#17
#13
#14
13 / 15
Align ladder in either side of the bunk bed,
then secure by using bolts (#F).
Align slat kits (#16,17) to the bunk bed, then secure by
using screws (#I).

ASSEMBLY INSTRUCTIONS
11
12
Hardware #F x 2pcs
Part #18 x2pcs
#18
#F
#J
#17
14 / 15
Align support leg (#18) to the slat kit (#17),
then secure by using bolts (#F).

15 / 15