Furniture of America FOA-DK5685 User manual

1 / 13
MODEL #
FOA-DK5685
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
# 20-01-13

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X13

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ X13

4 / 13

VANITY SET
FOA-DK5685
#1 1pc #2 1pc #3 1pc
5 / 13
Left Leg Frame
#4 1pc
#5 1pc #6 2pcs #7 2pcs #8 1pc
#9 4pcs
Table top
Mirror Shelf Frame
Stool Leg
Right Leg Frame Bottom Stretcher
#A 18pcs
Bolt Ø1/4" x 1-3/16"
#B 8pcs #C 8pcs
Lock Washer Ø1/4" Flat Washer Ø5/16"
#10 1pc
Glass
Stool Seat
Mirror support rail

6 / 13
#D 1pc #E 4pcs #F 2pcs
Screw #4 x 2"
Allen Wrench 4mm Wood Dowel Ø8 x 20mm
#G 1pc
Plug
#1
#2
#3
#4
#5
#6
#7
#7
#8
#9
#H 6pcs
Glass suction cup Ø26mm
#I 1set
Anti-tip Skit
#10

7 / 13
FOA-DK5685 is packed in 2 cases
Carton Disignation Part Hardware
FOA DK5685-1
FOA DK5685-2
Table top
Left leg frame
Right leg frame
Bottom stretcher
Mirror support rail
(2pcs)
Shelf frame (2pcs)
Stool seat
Stool Leg(4pcs)
Glass
Mirror
#1
#2
#3
#4
#6
#7
#8
#9
#10
#5
#A x 18pcs
#B x 8pcs
#C x 8pcs
#D x 1pc
#E x 4pcs
#F x 2pcs
#G x 1pc
#H x 6pcs
#I x 1set

8 / 13
ASSEMBLY INSTRUCTIONS
1
Part #2 x1pc
Part #3 x1pc
2
Part #1 x1pc
#3
#2
#4
#F
Part #4 x1pc
Hardware #F x2pcs
#A
#D
#E
#1
Hardware #A x10pcs
Hardware #E x4pcs #2
#3
Align bottom stretcher (#4) to the leg frames
(#2,3), then secure by using screws (#F).
Insert dowels (#E) to the top (#1), then align
the leg frames (#2,3) to the top (#1). Secure
by using bolts (#A).

9 / 13
3
Part #6 x2pcs
4#6
#A
#B
#C
#D
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
#10
#H
Hardware #H x 6pcs
Part #10 x1pc
ASSEMBLY INSTRUCTIONS
Attach suction cups (#H) to the
top, then carefully place the glass
(#10) to the top.
Align mirror support rails (#6) to
the back of unit, then secure by
using bolts (#A) with washers
(#B,C).

ASSEMBLY INSTRUCTIONS
10 / 13
Part #5 x1pc
#D
#A
#B
#C
#5
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
5
6
#7
#7
Part #7 x2pcs
Align mirror (#5) to the mirror
support rails, then secure by using
bolts (#A) with washers (#B,C).
Secure handles to the outside of
the drawers. Place shelf frames
(#7) on the glass top.