Furniture of America FOA7173Q User manual

MODEL #
FOA7173Q
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 11
VERSION # 20-09-29

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX11

4 / XXXXXXX11

BED
#1 1pc #2 2pcs
Headboard Leg (L&R)
#3 1pc
Headboard Rail
#4 2pcs
#5 1pc #6 2pcs
Footboard
#A 8pcs
Flat washer
Ø5/16
Bolt 5/16" x 1-3/8"
Headboard cross bar
Lock washer
Ø5/16"
Slat (13pcs)
Slat support leg
370 x 30 x 30mm
#9 1Set
Drawer support leg
160 x 30 x 30mm
#7 4pcs
(Ø5/16") (Ø5/16")
Allen wrench M4
5 / 11
#10 1pc
Conceal Panel
Center Rail
#8 1pc
FOA7173Q
#D 1pc #B 20pcs #C 20pcs

#E 12pcs #F 30pcs
Bolt 5/16" x 1"
#G 6pcs
Exploded View
Screw #4 x 30mm
6 / 11
Screw #4 x 10mm
#1
#2R
#2L
#3 #4
#4
#5
#6
#9
#7
#10
#8

Carton Disignation Part Hardware
#D x 1pc
#1
Headboard
Headboard Leg
(L&R)
Headboard cross
bar
Rail
Footboard
Slat (13pcs)
Drawer support leg
160 x 30 x 30mm
Slat support leg
370x 30 x 30mm
#2
#3
#4
#5
7 / 11
#E x 12pcs
Conceal Panel
#6
#7
#8
#9
#10
Center Rail
FOA7173Q is packed in 3 cases
FOA7173
Q-HB
FOA7173
Q-R
FOA7173
Q-FB
#F x 30pcs
#G x 6pcs
#A x8pcs
#B x20pcs
#C x20pcs

ASSEMBLY INSTRUCTIONS
1
2
Part #5 x1pc
Part #6 x2pcs
Part #1 x1pc
Part #2 x2pcs
Part #3 x1pc
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
#2L
#2R
#3
#1
#5
#6
8 / 11
#D
#A #B
#C
Align HB legs (#2R/L) and support (#3) to the headboard
(#1), then secure by using bolts (#A) with washers (#B,C).
Attach FB support legs (#6) to the
bottom of the footboard (#5).

ASSEMBLY INSTRUCTIONS
3
Part #4 x2pcs
4
Part #7 x4pcs
Part #8 x1pc
9 / 11
#E
#8
#7
#7
#4
#4
#C
#B
Hardware #C x12pcs
Hardware #B x12pcs
Hardware #E x12pcs
Align side rails (#4) to the headboard and
footboard, then secure by using bolts (#E) with
washers (#B,C).
Attach support legs (#7) to slat (#8).

5
6
ASSEMBLY INSTRUCTIONS
10/ 11
#9
#F
Part #9 x1Set
Hardware #F x26pcs
#F
Hardware #F x4pcs
Align slats (#9) to the side rails, then
secure by using bolts (#F).
Align center support slat to the slats,
then secure by using screws (#F).

#G
#10
Part #10 x1pc
Hardware #G x6pcs
7
8
ASSEMBLY INSTRUCTIONS
11/ 11
Align cover panel (#10) to the bed,
then secure by using screws (#G).

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
3 - People
(Included)
Allen Wrench
Recommended
Phillips
Screwdriver
(Not Included)
1 / 11
FOA7173CK
VERSION # 20-09-29

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX11

4 / XXXXXXX11

BED
#A 8pcs
Flat washer
Ø5/16
Bolt 5/16" x 1-3/8" Lock washer
Ø5/16"
#D 2pcs
Allen wrench M4
5 / 11
#1 1pc #2 2pcs
Headboard Leg (L&R)
#3 1pc
Headboard Rail
#4 2pcs
#5 1pc #6 2pcs
Footboard
Headboard cross bar
Slat (13pcs)
#9 1Set
Drawer support leg
160 x 30 x 30mm
(Ø5/16")
#10 1pc
Conceal Panel
Slat support leg
370 x 30 x 30mm
#7 4pcs
(Ø5/16")
Center Rail
#8 1pc
#11 2pcs
Siderail top crown
FOA7173CK
#B 20pcs #C 20pcs

#E 12pcs #F 30pcs
Bolt 5/16" x 1"
#G 6pcs
Exploded View
Screw #4 x 30mm
6 / 11
Screw #4 x 10mm
#1
#2R
#2L
#3
#4
#4
#9
#6
#5
#7
#8
#H 10pcs
#I 10pcs #J 10pcs
Flat washer
Ø1/4" x13mm
Bolt 1/4" x 1-3/8"
Lock washer
Ø1/4"
#10
#10

Carton Disignation Part Hardware
#1Headboard
Headboard Leg
(L&R)
Headboard cross
bar
Rail
#2
#3
#4
#5
7 / 11
Siderail top crown
#6
Footboard
Drawer support leg
160 x 30 x 30mm
Slat support leg
370x 30 x 30mm
Center Rail
Slat (13pcs)
Conceal Panel
#7
#8
#9
#10
#11
FOA 7173 CK is packed in 3 cases
FOA7173
K-HB
FOA7173
CK-R
FOA7173
K-FB
#F x 30pcs
#E x 12pcs
#G x 6pcs
FOA7173K-HB
#A x 8pcs
#B x 20pcs
#C x 20pcs
#D x 1pc
#I x 10pcs
#J x 10pcs
#D x 1pc
#H x 10pcs

ASSEMBLY INSTRUCTIONS
1
2
Part #5 x1pc
Part #6 x2pcs
Part #1 x1pc
Part #2 x2pcs
Part #3 x1pc
Hardware #A x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
#2L
#2R
#3
#1
8 / 11
#5
#6
#D
#A #B
#C
Align HB legs (#2R/L) and support (#3) to the
headboard (#1), then secure by using bolts
(#A) with washers (#B,C).
Attach FB support legs (#6) to the
bottom of the footboard (#5).

ASSEMBLY INSTRUCTIONS
3
4
9 / 11
#8
#7
#7
Part #7 x4pcs
Part #8 x1pc
#4
#4
#E
#C
#B
Part #4 x2pcs
Hardware #B x12pcs
Hardware #C x12pcs
Hardware #E x12pcs
Align side rails (#4) to the headboard
and footboard, then secure by using
bolts (#E) with washers (#B,C).
Attach support legs (#7) to slat
(#8).