Furniture of America Fuero CM-BT6464 User manual

For more information contact our team: [email protected]

1) Attach cam bolts (#H) onto panels (#2,3,4).
2) Attach cam locks (#I) into the
holes of the panels above.
When attaching panels together, make sure to reference
back to page 5 on how to properly fit cam bolts (#H) to
cam locks (#I).

Align legs (#14) to the base panel (#5),
then secure by using screws (#F).

Make sure to check if all arrows of the cam locks (#I) on
panels (#2,3,4) are facing towards the cam bolts (#H).

Make sure to check if all arrows of the cam locks (#I) on panels
(#2,3,4) are facing towards the cam bolts (#H).

Make sure to check if all arrows of the cam locks (#I) on
panels (#2,3,4) are facing towards the cam bolts (#H).

Align top metal tube (#10) to the back holes of the unit, then secure
by using bolts (#C) with washers (#D).
Secure metal tube (#10) to the side panels (#2,4)
by using bolts (#B) with washers (#D).

Attach bolts (#G) to the holes of the bottom metal tube (#11), then insert middle
washers (#J) to the bolts (#G). Secure legs (#12) to the bolts (#G).
Align bottom metal tube (#11) to the side panels holes (#2,4),
then secure by using bolts (#B) with washers (#D).

1) Align top metal rack (#15) to the holes of the
top panel (#1), then secure by using bolts (#A)
with washers (#D).
13
15
2) Align bottom metal racks (#13) to the holes
of the unit, then secure by using bolts (#A) with
washers (#D).