Furniture of America Milly CM3609PT-5PK User manual

MODEL #
CM3609PT-5PK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
(Not Included)
(Included)
Allen Wrench
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
Phillips
Screwdriver
Wrench 13mm
(Included)
2 - People
Recommended
1 / 12
VERSION # 20-08-18

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 12

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 12

4 / XXXXXXX12

TABLE
#1 1pc
Table Top Table Leg
#2 4pcs #3 2pcs
Table Shelve
#A 12pcs
Bolt Ø5/16" x 2-3/8"
#B 12pcs #C 12pcs
Flat Washer Ø5/16"
#D 1pc
Allen Wrench 4mm
Lock Washer Ø5/16"
#1
#3
#2
CM3609PT-5PK
5 / 12

ASSEMBLY INSTRUCTIONS
1
2
Part #2 x2pcs
Part #3 x2pcs
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
#A
#C
#B
#D
#3 #3
#2
#2
#3
#2
#2
#3 #A
#C
#B
#D
Part #2 x2pcs
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
6/12
Align shelves (#3) to legs (#2), then
secure by using bolts (#A) with
washers (#B,C).
Align legs (#2) to shelves (#3),
then secure by using bolts (#A)
with washers (#B,C).

ASSEMBLY INSTRUCTIONS
3
4
Part #1 x1pc
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
#A
#C
#B
#D
#2
#1
7/12
Align table top (#1) to legs (#2),
then secure by using bolts (#A)
with washers (#B,C).

CHAIR
#1 1pc x4
Chair Back Seat Frame
#2 1pc x4 #3 1pc x4
Cushion Seat
#4 2pcs x4
Front Legs (L&R) Side Stretcher (L&R)
#5 2pcs x4 #6 1pc x4
Front Stretcher
#A 4pcs x4
Bolt Ø1/4" x 3"
#B 3pcs x4
Bolt Ø1/4" x 1-1/4"
#C 11pcs x4
Lock Washer Ø5/16"
#D 11pcs x4
Flat Washer Ø5/16"
#E 4pcs x4
Nut Ø5/16"
#F 1pc
Wrench 13mm
#G 12pcs x4
Screw #8 x 38mm
CM3609PT-5PK
8/12

x 4
#1
# 2
# 3
# 4L
# 4R
# 5L
# 5R
# 6
Exploded View
9/12

ASSEMBLY INSTRUCTIONS
1
Part #1 x1pc
Part #2 x1pc
Hardware #B x3pcs
Hardware #C x3pcs
#2
#D
#C
#A
#F
#1
Hardware #D x3pcs
Hardware #A x4pcs
Hardware #C x4pcs
Hardware #D x4pcs
#2
#1
#D
#C
#B
#F
2
x 4
x 4
10/12
Align seat frame (#2) to chair
back (#1), then secure by using
bolts (#B) with washers (#C,D).
Secure corner holes of the seat
frame (#2) to chair back (#1) by
using bolts (#A) with washers
(#C,D).