Furniture of America YNJ-BT2222 User manual

Furniture of AmericaM
E-commerce-Enitial Lab
ASSEMBLY INSTRUCTIONS
YNJ-BT2222
~
~I~
~I~
ASSEMBLY RATING
The Assembly Rating is as-point
system that shows the degree of effort
needed in assembling a specific
product (with 1 being easy and 5 being -
difficult). For most products, two
persons are recommended.
Tools Required for Assembly
Phillips Screwdriver 0=§lj ..
(Not Included)
Allen Wrench
~~
(Included)
Hammer
(Not Included)
2 PERSON RECOMMENDED
EASY OOOO@ DIFFICULT
Pace 1
16.08.23

rica
Furniture
of A •
TM
E-commerce Division - Enitiallab
Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed
in order for you to
fully enjoy your purchase. Your satisfaction
is the greatest recognition we could
have.
Because we value your trust
in our company, we will do our best to rneet your
service expectations. Should you have any assembly related questions, parts
replacement requests, comments or suggestions, please feel free
to contact us any
time. To help expedite the service, please have the assembly instructions available,
along with your order receipt.
www.foagroup.com
[email protected]
Toll-Free 1-888-980-5122 or 1-626-363-9311
. ~-fr
j rA x L
. -- ' 1-626-270-4451
o Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)
https:lltwitter.com/foagroup
I http://hUp:llinstagram.com/foagrou p#
~ -http://www.pinterest.com/foagroup/
https:llwww.youtube.com/user/FurnitureOfAmerica
Paae 2

6..i
Ji'urnltllN! (if Am.erica
ASSEMBLY & CARE ADVICE
fOR YOUR FuRNITURE TO LAST-CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY.
PLEASE FOLLOW1HE INFORMATION PROVIDED 6 E10WTO fULLY ENJOY YOUR FURNITURE.
BASIC ASSEMBLY TECHNIQUES
1
It is highly rocoJnmendod that tho
assembly s.Muld be oono near the
area of its intended location, Make
sure you have enough space to move
around during the assembly.
-I
Position each part correctly and insert
screws or oolls into Iherrrespective
holes by hand tighlen or using the
proper hand tool. Only tighten when
slep is completed or when instructed
to do so.
Use cardboard or carpel area when
assemb lf ng furniture to prevent
scratChes . Make sure the furniture
(es1s on a flal and level sur1ace with
each leg evenly touching 1he floor.
4
ALWAYS have at least two people to
help WIth transporting and assembHng
the product to avoid any potential
injury and/or damage .
TURN
CLOCKWISE
TO
TIGHTEN
Make sum all parts are properly
allgned, then use the appropriate
hand tool to completely tighten the
bolts or screws. Do not use power
100ls and do not overtighten.
Savo the instructions and store any
supplied tool tor latermainfenance.
After two weeks. check and tighten
any loose hardware and repeat again
every six months thereafter.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO
BE WOBSLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE
SERIOUS INJURY.
FAILURE TO FOLLOWTHE GUIDELINES ABOVE MAY
RESULT
IN INJURY ANDIOR PROPERTY DAMAGE.
FuIlNITlJR:E OF IIMEJlICA. All RIGHtS RESEflVU) .
Paae 3

PRE-ASSEMBLY INTRODUCTION
Unless you are particularly adept at assembling flat-packlknock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following:
1. Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space
to move around during
the assembly. ALWAYS have at least two people
to help with transporting and
assembling of the product
to avoid any potential injury and/or damage.
2. To protect from damage, assemble the item on a clean, protective surface,
such
as on a carpet or cardboard.
3. Make sure you have taken all the parts and hardware out of their packaging.
Do not throwaway packaging material until assembly
is completed.
4. Make sure all parts and hardware are accounted for
by comparing the actual
parts and hardware
to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
5. Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts
in order of use and group the identical
hardware together
to make it easier to grab each piece as you begin to
assemble.
6. During the assembly process, make sure all parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use
power tools and do not over tighten.
7. When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When
in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
Paae 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS
Note: Every cam lock bolt
must hove acam lock
connector in order t.o
fasten the parts together.
Alignthecam connector with its
(1) d d
e t rea a
end of the cam bolt
S 'h 'h
ecuret
side opening (orarrow)
poinUngtothe small
by using,a drilled
hole ,
screwdriver.
,./ ~~
/
Turn right (tfockwise) to tighten. "
(2) (3)
Two parts should fit snugly ,
Insert the
cam lock against eachothet.
boft into the
pre-drilled hole
above the cam
eonnector ~
1
(4) Turn the e·
arn connector with a
screwdriver
untH it will notturn
any more with lightto nloderate
foree.
t @)
~
- ~
f .
I\ .
Turn right (clockwise) to tigJlten.
Paae 5

MULTU-FUNCTION CABINET
ASSEMBLY INSTRUCTIONS MODEL#YNJ-BT2222
Please keep for future reference
Before you begin, please
read "Assembly and
Care Advice","Pre-
Assembly Introduction"
and "Cam Lock Fastener
Assembly Instructions"
01PC 4)1PC
I I f===1
rl
01PC
@1PC
I[
'--------- ~
@1PC
0
···0
• • ••• : .0
. .
41>1 PC
n
·· ··
o :. ••• .
. .
@1PC
II
LJ
01PC
D
@)2PCS
~2PCS
1° 1
..--
"<t
M
41>
~III
(!)
ill
~2PCS
t °1
~llI2PCS
I
ill2PCS
D
(!)2PCS
D
~2PCS
(!)
~
@2PCS
o
HARDWARE LIST
(!)1SPCS @1SPCS
@2SPCS @SPCS
@SPCS
~
~
[=)
CCD
c0
@32PCS
@6PCS
@12PCS
@4PCS
@2PCS
0.59" 0.75"
1.97"
~
<?
o-jJ
~\\\\\\m\\\\\\\\\\\')
C J
@4PCS @SPCS
@4PCS @1PC @1PC
2.37"
IJ
~il~I~~
~
6i :~ - )
~I~
PARTS LIST
ill
DIMENSIONS
47.24" (W) X1S.7S" (D) X34.1" (H)
m2PCS
[]
~2PCS
I
02PCS
D
(!)1PC
~
~
\!) 2PCS
t:4 2PCS
u u
@SPCS (Z)SPCS
0.75"
~
[>nnmnmmm>
@16PCS
@4PCS
1.25" 1.38"
~
~
@1PC
€j) 1PC
1"
~
0.71"
~
():;tt-
Paae 6

"
Paqe 7
" ",
~
,
.... <"¢®
X2
ASSEMBLY INSTRUCTIONS
STEP1
Hardware #1 =4pcs
Hardware #2=4pcs I@ /'
Hardware #3=4pcs
Hardware #9=2pcs
____ t ~
Hardware #10=4pcs
1
\~
Hardware #13=8pcs
I
I @
,/
'7
~/
~
"", ,~
@
@~
~~5
o
I
o'"'i
~
,~
~"'"r
~~

·I
I
~.
~
I
~
I
~.
s:JdOZ=£# aJeMpJeH
s:Jdt;o 1.= 1.# aJeMpJeH
r
i •
I
I
~@ .~
~(J)
o •
® I
i
I
I
~:
~
Zd3~S
SNOI~~nH~SNI A1SW:lSSY

6 abed
s:)dZ=Z 1-# ~UeMPJeH
t7d3~S
..
•
/J
/J
•
s:)dt7= I- 1-# ~UeMPJeH
s:)dZ=Z# 8JeMpJeH
£d3~S
SNOI~~nH~SNI A1SW3SSY

•
Q
s:JdZ "=Z# a.leMp.leH
Sd3~S
SNOI~~nH~SNI A1SIN3SSY

ASSEMBLY INSTRUCTIONS
STEP6
Hardware #14=4pcs
Hardware #15=4pcs
Hardware #16=8pcs
~9,
~9
~@-
@
~/.
// @
1.Jl)I,) \\\t:;;A
< ~ ,IJo
-- @
--- tJ
Paae 11

s:;,d8=£ 1-# aJeMpJeH
s:;,d8='tJ'# aJeMpJeH
s:;,d17=£# aJeMpJeH
Ld3~S
SNOI~~nH~SNI A1SIN:lSSY

86esn 8104
s!)d8=O 1-# aJeMpJeH
S!)dv=6# aJeMpJeH
S!)dZ£=8# aJeMpJeH
S!)d8=L# aJeMpJeH
8d3J.S

ASSEMBLY INSTRUCTIONS
STEP9
Hardware #5=8pcs
Hardware #6=8pcs
Hardware #17=4pcs
Extend the two outer slides of
the runners so that they could
align with the sides of the
drawer. Make sure the pre-
drilled holes from the drawer
align with the screw holes of
the outer slides.
Secure two screws from the
inside of the drawer using a
Phillips screwdriver to tighten
them to the outer slides.
'} @
~@
G?
' \®
Paqe 14

ASSEMBLY INSTRUCTIONS
STEP10
Hardware #19=1 pc
Hardware #20=1 pc
Hardware #21=1pc
For safetY,please use the strap
to secure the uniton the wall
Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
ASSEMBLY IS COMPLETED
Paae 15

A Guide to
Important note:
If plastic wall plugs
are supplied
with your
product:
~:====i
-these are only suitable for
use
in masonry walls.
If you
are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect fixings
is the
responsibility of the installer.
Wall Mounting ~ & Fixings
~ Important: When drilling into walls always
@) check that there are no hidden wires or pipes etc.
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
Hints:
1: General rule: &Always use a larger screw and wall plug
if you
are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole
size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well fitted and are a tight fit in the
drilled hole.
Types of walls
No.1 "General Purpose" wall plug
...
\~;{.;
.'.
,," •• D • :.~ ".,; ~ • .,
" " . ."
Generally aerated blocks should not
be used to support heavy loads, use
a specialist fitting
in this case. For light
loads, general purpose wall plugs can
be used.
No.2 "Plasterboard" wall plug
For use when attaching light loads on
to plasterboard partitions.
~ Care &
~ Maintenance
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
v
''''',''''
. ~ .
Co.
No.3 "Cavity Fixing" wall plug
For use with plasterboard partitions or
hollow wooden doors.
No.4 "Cavity Fixing-Heavy Duty"
wall plug
For use when fitting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
Safety: Always check the fitting
~nd location to ensure your safety
In and around the home.
No.5 "Hammer Fixing" wall plug
0·.
... 0 • .,'
. .
• Co .. • ....
", ", "',,
"'---,-' =0=; "
.. '.. .
4) •• '.. D.
O
.... " : ...
For use with walls stuck with
plasterboard. The hammer fixing allows
it to be fixed to the wall rather than the
plasterboard. Always check the fixing
is secure to the retaining wall.
NO.6 "Shield Anchor" wall plug
Heavy loads
o · ., "':
.... ". D ...
.. ." '" :.;. ..
" '0,'"
• .. " ..
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
Fitting: From time to time check
the fitting
to ensure the wall plugs
or screws do not become loose.
Paae 16