Furniture of America CM7678F User manual

2. Align the legs (#5) to the
holes along the bottom of
the headboard (#1) and
footboard (#3). Insert 4
screws (#G) and 2 bolt
assemblies (#A) into each
leg. Secure using the Allen
wrench and a screwdriver.
1. Prepare 8 bolt assemblies by
first inserting a lock washer (#B)
onto the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
1. Prepare 8 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align each end of the side rails (#2) to
the hole along the the headboard (#1) and
footboard (#3). Insert the bolts and secure.

1. Prepare 2 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align the top of the support legs (#6) to the holes along the center support rail (#7).
Insert a bolt assembly into each from above and secure using the Allen wrench (#F).
1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align each end of the center
support rail to the holes along
the center of the headboard
and footboard. Secure using
the Allen wrench (#F).

Assemble the slats by following the image below.
Place the assembled
slats onto the side rails.

2. Align the legs (#5) to the
holes along the bottom of
the headboard (#1) and
footboard (#3). Insert 4
screws (#G) and 2 bolt
assemblies (#A) into each
leg. Secure using the Allen
wrench and a screwdriver.
1. Prepare 8 bolt assemblies by
first inserting a lock washer (#B)
onto the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
1. Prepare 8 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align each end of the side rails (#2) to
the hole along the the headboard (#1) and
footboard (#3). Insert the bolts and secure.

1. Prepare 6 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align the top of the support legs (#6) to the
holes along the center support rail (#7).
Insert a bolt assembly into each from above
and secure using the Allen wrench (#F).
1. Prepare 8 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).
2. Align each end of the center
support rail to the holes along
the center of the headboard
and footboard. Secure using
the Allen wrench (#F).

Assemble the slats by following the image below.
Place the assembled
slats onto the side rails.

1. Prepare 8 bolt assemblies by first inserting a lock washer (#B)
onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A).
2. Align the legs (#5) to the holes along the bottom of the headboard
(#1) and footboard (#3). Insert 4 screws (#F) and 2 bolt assemblies
(#A) into each leg. Secure using the Allen wrench and a screwdriver.
2. Align each end of the side rails (#2) to
the hole along the the headboard (#1) and
footboard (#3). Insert the bolts and secure.
1. Prepare 8 bolt assemblies
by first inserting a lock
washer (#B) onto the bolt
(#A) then a flat washer (#C)
onto that same bolt (#A).

Apply an end cap (#D) onto each end of the slats (#4).
Place the slats onto the side rails.