Furniture of America Meagan CM3152BN User manual

1 / 6
VERSION # 20-03-10
MODEL #
CM3152BN
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
2 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX6

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX6

4 / XXXXXXX6

5 / 6
BENCH
CM3152BN
#1 1pc
HARDWARE
PARTS
HARDWARE
PARTS
#2 4pcs #4 2pcs
Leg
#A 8pcs #B 8pcs #C 8pcs #D 1pc
Bolt Ø1/4"x2-1/4" Allen WrenchFlat washerLock washer
Long stretchers
#E 8pcs
PARTS
Screw #4 x 1-1/2"
#3 2pcs
Cushion With
Seat Frame Short stretchers

6 / 6
ASSEMBLY INSTRUCTIONS
1
Part #1 x1pc
Part #2 x3pcs
Hardware #A x 6pcs
Hardware #B x 6pcs
Hardware #C x 6pcs
2#A
#B
#C
#D
#A
#B
#C
#D
#E
#1
#3
#4
#3
#4
#1
#2
#2
Part #3 x1pc
Part #4 x1pc
Hardware #A x 2pcs
Hardware #B x 2pcs
Hardware #C x 2pcs
Part #3 x1pc
Part #4 x1pc
Part #2 x1pc
Hardware #E x 8pcs
Prepare 6 bolts assembly by inserting lock washer (#B), then flat
washer (#C) onto bolts (#A). Align 3 legs (#2) to the holes of the
cushion seat (#1), then align long/short stretchers (#3,4) to the
holes of the legs (#2). Secure legs (#2) to cushion seat (#1) with
bolts (#A),
Prepare 2 bolts assembly by inserting lock washer (#B), then flat
washer (#C) onto bolts (#A). Align the last leg (#2) to the holes of
the cushion seat (#1), then align the long/short stretchers (#3,4) to
the holes of the legs (#2). Secure leg (#2) to cushion seat (#1) with
bolts (#A), then secure stretchers (#3,4) with screws (#E).