Furniture of America CM7184CK User manual

1 / 10
MODEL #
CM7184CK
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
VERSION # 21-07-30
Recommended
3 - People
EASY
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
DIFFICULT

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 10

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 10
scratches and damages.

4 / XXXXX10

BED
CM7184CK
5 / 10
#2 1pc
Headboard
#1 1pc
H/B Support Rail
#3 2pcs
#4 1pc
Footboard
Side rail
#9 2pcs#7 4pcs
Slat
#A 8pcs #B 8pcs
Bolt Ø5/16" x 1-5/8" Lock Washer Ø5/16"
#C 8pcs
Flat Washer Ø5/16"
#D 1pc #E 8pcs
Screw #4 x 25mm
Allen Wrench M4
Headboard Leg(L&R)
#8 8pcs
Slat support leg
30x30x195mm
HB Legs
#5 2pcs #6 4pcs
Finial

#1
#2
#3L
#6
#6
#9
#9 #6 #4
#5
#5
#6
#3R
#7
#8
Exploded View
6 / 10

Carton Disignation Part Hardware
CM7184CK-HB
CM7184CK is packed in 3 cases
CM7184CK-FB
CM7184CK-R
#A x 8pcs
#B x 8pcs
#C x 8pcs
#D x 1pc
#1
#2
#4
#5
#9
7 / 10
#3
#6
#6
#7
#8
#E x 8pcs
Headboard
HB Leg(L&R)
Footboard
H/B Support
Rail
Finial
Legs
Finial
Slat
Slat support leg
(8pcs)
Side rail
(2pcs)
(2pcs)
(2pcs)
(2pcs)
(4pcs)
(2pcs)

ASSEMBLY INSTRUCTIONS
8 / 10
1
Part #1 x1pc
Part #2 x1pc
Part #3 x2pcs
Part #6 x2pcs
Hardware #A x 8pcs
Hardware #B x 8pcs
Hardware #C x 8pcs
2
Part #4 x1pc
Part #5 x2pcs
Part #6 x2pcs
Leveler
Leveler
#6
#6
#1
#2
#6
#6
#5
#5
#A
#B
#C
#D
#3
#3
#4
#D
#A #B#C
Align the HB legs (#3R/L) to the
headboard (#1) and HB support
(#2), then secure by using bolts
(#A) with washers (#B,C). Attach
finials (#6) to the headboard (#1).
Attach FB legs (#5) and finials (#6) to
the footboard (#4). Adjust the leveler
on the legs (#5) according to ground
level.

#1
#4
#9
#9
ASSEMBLY INSTRUCTIONS
9 / 10
3
Part #9 x2pcs
4
Part #7 x1pc
Part #8 x2pcs
Leveler
#7
#8
x 4
Align and latch the side rails (#9) to
the grooves of the headboard (#1) and
footboard (#4).
Align and attach support legs (#8)
to the slats (#7).

ASSEMBLY INSTRUCTIONS
5
Hardware #E x8pcs
6
#E
#7
#9
10 / 10
Align slats (#7) to the side rails
(#9), then secure by using
screws (#E).