FVC Low Pro F80 Kit User manual

PRODUCT
IMAGE
SP0109B
Low Pro F80 Kit
Installation Guide
FLATLINE VAN CO • [e-mail] • 888-667-5576

All Flatline Van Co products must be properly assembled and secured before attaching to your
vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily
injury or death to you or to others involved. You are responsible for assembling and securing flatline
van co products to your vehicle, checking the mounting points and attachments prior to use, and
regularly inspecting the products for wear and or damage. We always recommend you use a
professional to install any aftermarket accessories to your vehicle. If you have no mechanical
experience and are not thoroughly familiar with the installation procedures, you must have the
product installed by a professional installer or other qualified persons. The responsibility is yours
and must be taken seriously for everyone's safety.
1
FLATLINE VAN CO • [e-mail] • 888-667-5576
thanks.

2
FLATLINE VAN CO • [e-mail] • 888-667-5576
THANK YOU!
ARE YOU EXCITED ABOUT YOUR NEW LOW PRO ROOF RACK AND F80 AWNING KIT?
HERE ARE A FEW THINGS TO DO BEFORE BEGINNING THE INSTALLATION PROCESS--
• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO
DAMAGE INCURRED DURING SHIPPING.
• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR
CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.
• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK
INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS
AND HARDWARE.
• GATHER ALL TOOLS REQUIRED FOR INSTALL.
-5/32 HEX KEY ALLEN WRENCH
-7/32 HEX KEY ALLEN WRENCH
NOTE-
YOU WILL NEED TO REUSE HARDWARE FROM YOUR LOW PRO ROOF RACK
TO INSTALL THE F80 KIT. IF YOU NEED ADDITIONAL HARDWARE PLEASE
REACH OUT TO OUR CUSTOMER SERVICE TEAM.
THIS INSTALLATION GUIDE DOES NOT COVER THE INSTALL PROCESS OF
YOUR FIAMMA F80 AWNING. PLEASE REFER TO THE INSTALLATION GUIDE
PROVIDED WITH YOUR AWNING FOR INFORMATION. THE FVC F80 AWNING
KIT DOES NOT ALTER OR CHANGE THE PROCESS DEFINED BY FIAMMA.
TOOLS
5/32 ALLEN KEY 7/32 ALLEN KEY

PACKAGE CONTENTS
3
FLATLINE VAN CO • [e-mail] • 888-667-5576
CENTER BRACKET
QTY-6
REAR BRACKET
QTY-1
FRONT BRACKET
QTY-1
STICKER PACK
QTY-1
INSTALLATION GUIDE
QTY-1

FLATLINE VAN CO • [e-mail] • 888-667-5576
LET’S GET STARTED!
1. IF YOU ARE INSTALLING THIS KIT AT THE SAME TIME AS YOUR LOW PRO
ROOF RACK, SLIDE THE APPROPRIATE AMOUNT OF RAIL NUTS INTO THE
PASSENGER SIDE ROOF TRACK TO ACCOMMODATE YOUR F80 BRACKETS.
IF YOU ARE INSTALLING THE F80 WITH A LOW PRO THAT HAS ALREADY
BEEN FITTED TO YOUR VAN, YOU’LL RE-USE EXISTING RAIL NUTS IN THE
TRACK. IF YOU HAVE TOO MANY OR TOO FEW; YOU’LL NEED TO ADD OR
REMOVE AS NECESSARY. WE SELL PACKS OF ADDITIONAL RAIL NUTS IF YOU
NEED MORE.
2. NEXT, GRAB YOUR F80 BRACKETS AND START PLACING THEM IN POSITION
ON THE ROOF TRACK. YOU’LL WANT TO ORIENT THEM IN LINE WITH WHERE
YOU WANT YOUR CROSSBARS TO BE LOCATED (OR WHERE YOUR EXISTING
CROSSBARS OR LOCATED) IT IS IMPORTANT THAT THE FRONT AND REAR
BRACKETS ALIGN WITH THE RESPECTIVE ENDS OF YOUR LOW PRO RACK.
NOTE- BELOW IS AN EXAMPLE LAYOUT OF F80 BRACKETS WITH THE LOW
PRO ROOF RACK. NOTE THAT WE ARE ONLY SHOWING TWO (2) OF THE
CENTER BRACKETS INSTALLED; YOU CAN USE AS MANY AS NEEDED IN ANY
POSITION AS LONG AS THEY DON’T INTERFERE WITH YOUR FIAMMA
MOUNTING BRACKETS.
RAIL NUT
4
FIGURE 1

FLATLINE VAN CO • [e-mail] • 888-667-5576
3. NOW YOU CAN START AFFIXING THE BRACKETS TO THE ROOF TRACK AND
CROSSBARS. TIGHTEN THE BOLTS TO THE CROSSBARS FIRST, AND THEN
TIGHTEN DOWN TO THE ROOF TRACK.
4. ONCE YOU’VE TIGHTENED THE BRACKETS DOWN YOU CAN PLACE YOUR
FIAMMA MOUNTING BRACKETS IN THEIR APPROPRIATE POSITION. SEE FIGURE
2 & 3 FOR DETAIL. THIS IS THE LAST STEP, PLEASE REFER TO THE FIAMMA
GUIDE TO COMPLETE INSTALLATION OF YOUR AWNING.
5
FIGURE 2 FIGURE 3

FLATLINE VAN CO • [e-mail] • 888-667-5576 6
GET OUT AND EXPLORE!
LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave
Review." Add a short review and upload a few photos to be showcased on the product page.
SHARE YOUR PHOTOS WITH US
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos
with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
CUSTOMER SUPPORT
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and
outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
thanks!
@flatlinevanco
facebook.com/flatlinevanco
youtube.com/c/flatlinevanco
support@flatlinevanco.com