FYC JK0802 User manual

Thank you very much for purchasing our product. Please read
this manual carefully before use it
and keep the manual at proper place.
Electric Folding
Treadmill
JK0802

As shoppers, we're always trying to find the
perfect balance between quality & value. At
FYC, we believe we've achieved that. Our
diverse catalog of everyday essentials is
tailored especially to our customers &
guaranteed to hit that sweet spot of high quality
& low price.
Always

ŸFor safety purpose, do not stand on running belt while start.
ŸPlease stop immediately if you experience any kind pain, including but not limited to
chest pains,nausea, dizziness, or cramp.
ŸPlease speed up slowly if needed.
ŸAdjustment of belt is prohibited during using.
ŸIt is suggested to wear sports shoes and gym suit while using this equipment.
ŸChildren, the elder, the pregnant, and patients are prohibited from using this treadmill.
ŸPlease clip the safety key on your clothing during using.
ŸPlease firmly hold the handle bars during using.
Ÿ
To avoid injury please read this manual carefully before operating this machine
ŸPlease put the treadmill on flat ground. It is unsuitable to put the treadmill at following
places:
ŸThe proper power for the treadmill is A.C 110V.
ŸError may appear on display if the power is not stable. Please do not use the same
socket together with computer, air conditioner etc.
ŸIt is suggested to wear sports shoes and gym suit while use the treadmill.
ŸPlease speed up or speed down slowly.
ŸMake sure no child or other object is near while folding or unfolding the treadmill.
ŸThe treadmill should not be located near water or wet object. Error or damage may be
caused if water or other liquids drop into the equipment.
1
SAFETY NOTICE
CAUTION
1
2Slant ground or slant places on balcony.
3Sunlight area or near heater.
4Noisy places.
Outdoors. (The treadmill is specially designed for indoor use only)

ŸIf you do not feel well before using, please consult your doctor or coach.
ŸPlease unplug the equipment when not in use.
ŸPlease unplug the treadmill before cleaning, moving or change parts for the treadmill.
ŸChildren, the elder and the pregnant are prohibited from using the treadmill. Patients
should consult their doctor before starting any exercise routine.
ŸPlease place the treadmill on a level flat surface. There should be 2M of clearance
behind thetreadmill.
ŸDo not start the treadmill when it is folded.
ŸKeep all electrical components, especially motor, power cord and plug, away from
water or other liquids.
ŸDo not wear clothes like long dress, which might catch on any part of the treadmill while
using.
ŸDo not place the treadmill in an area that will block any vent or air openings.
ŸDo not put any objects on the treadmill.
ŸPut away the plug from heated place or fire seat.
ŸPlease switch off all functions and unplug after using.
ŸDo not stand on the belt while you're preparing to use the treadmill.
ŸDo not disassemble the treadmill without consulting professional technicians.
ŸPlease make sure the running belt is fastened before using.
CAUTION DURING USE
Keep both the machine and power cord away from heated surfaces.
2

TOOLS REQUIRED
ALLEN WRENCH
(PROVIDED)
SILICONE OIL
(PROVIDED)
HARDWARE
PRODUCTS MAIN PARTS
3
9
Cup Holder
Console
2、
Heart Inductor
3、
Safety Key
4、
Upright Tube
5、
1、
220
2
3
4
5
1
6
7
8
10
11
Stretch Knob
6、
Motor Cover
7、
Running Belt
9、
End Cap
11、
Fix Knob
8、
Side Rail
10、
Round Washer Arc Washers Plastic Washer Short Bolt
M8*16
Long Bolt
M8*50
Stretch Knob Fix Knob
2 PCS 4 PCS 2 PCS 2 PCS
2 PCS 1 PCS 1 PCS
Handrail Cover
2 PCS
10
1 2 3 4 5
6 8 9
MediumBolt
M8*30
2 PCS
7
Lock Knob
2 PCS
SAFETY KEY
(PROVIDED)

4
PARTS
THE FUSELAGE
PARTS
PARTSPRODUCT ASSEMBLY
1
Lift up the whole console.
First use the Short Bolt (part 5) & Arc Washer (part2) to fix the back of upright tube;
use the Medium Bolt (part 6) & Round Washer (part 1) to fix the side of upright tube.
Repeat the above steps to the other side upright tube.
65
1
2
6

5
PARTSPRODUCT ASSEMBLY
2
Lie down the console panel. Use Arc Washer (part 2) & Long Bolt (part 7) to fix the handrails.
7777
7772
7777
7772
NOTE:
PLEASE DO NOT PRESS THE CONNECTING WIRE IN CASE OF BEING
DAMAGED/BROKEN.

6
PARTSPRODUCT ASSEMBLY
3
4
8
Put the Handrail Cover (part 4). Screw the Stretch Knob (part 8) into the left tube.
Screw the Fix Knob (part 9) to fix the tube with base.
9
4

7
PARTSPRODUCT ASSEMBLY
4
4
3
10
43
10
First, unscrew the preset bolts at the back of the console
Adjust the angle of control panel. Use Lock Knob (part 10) & Plastic Knob (part 3)
to fix the control panel.
5
Put the safety key and finish the assembly.

8
PARTS
FOLDING UP AND SETTING DOWN
FOLD:
1. Secure the folding with Stretch Knob.
FOLDING UP AND SETTING DOWN
Product name Treadmill
Voltage 110V
Frequency 50Hz
Speed 0.5-6.5MPH
NOTE: Ensure the Power Switch is in the 'OFF' position and the power cord is unplugged from the electrical outlet.
2. Fold up the treadmill.
3. Loosen out the Fix Knob.
Stretch Knob.
Fix Knob
4. After the treadmill is folded up, tilt the treadmill and you can move it.

PARTSCONSOLE INSTRUCTON
9
1. After the power button is turned on, the machine will enter standby status.
2. When the machine is in standby status, press ON/OFF button. The machine will count down from 3 to
I and start. The default speed is 0.5 mph.
3. When the machine is in standby status, press ON/OFF button. The machine will count down from 3
to I and start. The default speed is 0.5 mph.
4. Press MODE button again, the TIME indicator will light up. The display will show the running time.
6. Press MODE button again, the SCAN indicator will light up. In this status. The display will show speed,
time and calories parameters consecutively.
7. When the machine is in standby status, press AUTO button to choose program between P1, P2 and
P3. Press SPEED+ / SPEED- to adjust the running time. Press ON/OFF to start the running.
5. Press AUTO button again, the CAL indicator will light up. The display will show the calories consumed.

TOTAL 3 PROGRAMS AS BELOW
0.5-6.5MPH/H
1. Press the " PROG " button to select an interval setting. Programs are displayed as P1-P3. Select the desired program,
and the console will display a countdown starting time(The time is adjustable). Press the " SPEED +/-" buttons if you wish to
increase or decrease the speed after the program begins. Press the " START " button to start the interval program.
2. The interval program is divided into 20 sections. Each exercise time equals the setting time divided by 20 different
speed modes. When the speed enters the next section, the treadmill will beep, and the speed will be changed according to
the set interval. After finishing one program, the system will beep and the machine will gradually come to a stop, and
display " END ".
P1 P2 P3
10
10
10
20
20
20
30
30
40
50
40
60
50
50
60
60
50
60
60
40
60
50
30
40
50
20
20
30
10
10
20
10
10
20
10
10
20
20
20
30
30
40
50
40
60
50
50
60
60
50
60
60
40
60
50
30
40
50
20
20
30

11
PARTSUSAGE OF SILICONE OIL
PARTSRUNNING BELT ADJUSTMENT
https://youtu.be/MksJIoi8Obo
Foryourconvenience,youcanscanthisQRcodetoseethevideofor
lubricatingtherunningbeltonYouTube,orinputthislinktowatch.

RUNNING BELT DEVIATE TO LEFT
RUNNING BELT DEVIATE TO RIGHT
RUNNING BELT LOGJAM
After installation video tutorial
1
2
3

https://youtu.be/uoXqZXk1Bx8
Foryourconvenience,youcanscanthisQRcodetoseethevideoon
YouTube,orinputthislinktowatch.

https://youtu.be/LGKKCk-yivM
Foryourconvenience,youcanscanthisQRcodetoseethevideo
onYouTube,orinputthislinktowatch.

PARTSDAILY MAINTAINANCE
STEP1:https://youtu.be/Xqri9ug5J7c
Foryourconvenience,youcanscanthisQRcodetosee
thevideoonYouTube,orinputthislinktowatch.

STEP2:https://youtu.be/nyZ75WFTZZw
（STEP1） （STEP2）
1
2
3
1. Please disconnect power before checking the machine or cleaning.
2. Clear belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.
RUNNING BELT DEVIATE TO LEFT
RUNNING BELT DEVIATE TO RIGHT
RUNNING BELT LOGJAM
12

PARTSEXERCISE GUIDE
Warm-up
Start each workout with of stretching and some light exercises. A proper warm-up5 to 10 minutes
Increase your body temperature, heart rate and circulation in preparation for exercise. Easy into
your exercise.
Training Zone Exercise
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your
Intensity for maximum performance. Breathe regularly and deeply as you exercise-never hold
you breathe.
Cool Down
Finish each workout with a light jog or walk for at least 1 minute. Then complete of 5 to 10 minutes
stretching to cool down. This will increase the flexibility of your muscles and will help prevent
post- exercise problems.
PLEASE NOTE: Before beginning any exercise program, consult your physician.
This is important especially if you are over the age of 45 or individuals with pre-existing health problem.
13

MAXIMUM
85%
70%
COOL DOWN
HEART RATE
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 7570 AGE
14
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS
EXERCISE. REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES
The most important factor here is the amount of effort you put in. The harder and longer you work the more calories
you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.
MADE IN CHINA

PARTSTROUBLE SHOOTING
Poorcontactorthe
powersupplymalfunctions Checkifallofthewiresandpartsarewellconnected.
Overload Theuser'sweightisovertheweightcapacityofthemachine.
Couldnotpoweron
Therunningbelt
doesn'tmove.
PROBLEM CAUSE（S）SOLUTION（S）
Note:
Itisrecommendedtoadjusttherunningbeltto
therightpositionbeforethefirsttimeofuse.
15

16
PARTSTROUBLE SHOOTING
Notputsafetykeyon
theyellowareaofpanel Putthesafetykeyon
Troublewiththecontrol
boardormotor
Trytochangethecontrolboard.lfnotwork,
trytochangethemotor
Troublewiththeconnected
lineorconsole
Trytochangetheconnectedline.Ifnotwork,
trytochangetheconsole
Overcurrentprotection Restart
Troublewithmotor Changethemotor
Troublewithconnectedline Changetheconnectedline
Overloadprotection Restart
Overloadprotection Restart
Err
E2
E4
E5
E6
E7
E8
E9
E10 Overvoltageprotection Restart
E11 Low-voltageprotection Restart
WARNING: E8, E10, E11 two times, If the display shows the error code please stop using this machine.

1
One year warranty Product Inquiry Orders FAQ Product Assembly Returns & Refunds
Dear Sir/Madam:
★★★★★Great products so far
February 24, 2018
Great product so far. Fast delivery, easy setup, and working without any issues.
With your inspiring rating, FYC will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
WARRANTY
If you have any issues with your orders, logistics,
items, etc, please contact us bythe following way.
Whatsapp: [phone]
Telephone: [phone] 83096029
Email: [email protected]