FYC JK0805E-3 User manual

Electric Folding
Treadmill
0805E-3
JK
Thank you very much for purchasing our product. Please read
this manual carefully before useing it
and keep the manual at the proper place.

As shoppers, we're always trying to find the
perfect balance between quality & value. At
FYC, we believe we've achieved that. Our
diverse catalog of everyday essentials is
tailored especially to our customers &
guaranteed to hit that sweet spot of high quality
& low price.
Always

11
ŸFor safety , do not stand on the running belt while starting.
ŸPlease stop using immediately if you feel vomiting or jerky during using.
ŸPlease speed up slowly if needed.
ŸAdjustment of belt is prohibited during using.
ŸIt is suggested to wear sports shoes and gym suit while using this equipment.
ŸChildren, the elder, the pregnant, and patients are prohibited from using this treadmill.
ŸPlease clip the safety key on your clothing during using.
ŸPlease firmly hold the handle bars during using.
To avoid injury please read this manual carefully before operating this machine
ŸPlease put the treadmill on the flat ground. It is unsuitable to put the treadmill in the
following places:
ŸThe proper power for the treadmill is A.C 110V.
ŸError may appear on display if the power is not stable. Please do not use the same
socket together with computer, air conditioner etc.
ŸIt is suggested to wear sports shoes and gym suit while useing the treadmill.
ŸPlease speed up or speed down slowly.
ŸMake sure no child or other objects is near while folding or unfolding the treadmill.
ŸThe treadmill should not be located near water or wet object. Error or damage may be
caused if water or other liquids drop into the equipment.
SAFETY NOTICE
CAUTION
1
2Slant ground or slant places on the balcony.
3Sunlight area or near heater.
4Noisy places.
Outdoors. (The treadmill is specially designed for indoor use only).

2
ŸIf you do not feel well before using, please consult your doctor or coach.
ŸPlease unplug the equipment when not in use.
ŸPlease unplug the treadmill before cleaning, moving or change parts for the treadmill.
ŸChildren, the elder and the pregnant are prohibited from using the treadmill. Patients
should consult their doctor before starting any exercise routine.
ŸPlease place the treadmill on a level flat surface. There should be 2M of clearance
behind thetreadmill.
ŸDo not start the treadmill when it is folded.
ŸKeep all electrical components, especially motor, power cord and plug, away from
water or other liquids.
ŸDo not wear clothes like long dress, which might catch on any part of the treadmill while
using.
ŸDo not place the treadmill in an area that will block any vent or air openings.
ŸDo not put any objects on the treadmill.
ŸPut away the plug from heated place or fire seat.
ŸPlease switch off all functions and unplug after using.
ŸDo not stand on the belt while you're preparing to use the treadmill.
ŸDo not disassemble the treadmill without consulting professional technicians.
ŸPlease make sure the running belt is fastened before using.
CAUTION DURING USE
Keep both the machine and power cord away from heated surfaces.

TOOLS REQUIRED
HARDWARE
Safety Key Round Washer Arc Washers
Short BoltLock Knob Stretch Knob
PRODUCTS MAIN PARTS
2、
Side Rail
7、
8、
3-Level Incline
11、
End Cap
12、
3
1、
1 PCS 2 PCS 2 PCS
4 PCS1 PCS 1 PCS
265
123
6
45
12
3
5
4
6
7
8
9
10
11 12
Mobile Wheel
10、
9、
5、
Running Belt
Cup Holder
Motor Cover
Upright Tube
Side Rail
6、 Safety Key
4、Heart Indüctor
3、
Display
Console
ALLEN WRENCH
(PROVIDED)
SILICONE OIL
(PROVIDED)
SAPNNER
(PROVIDED)

4
PARTS
RUNNINGDECK
PARTS
PARTSPRODUCT ASSEMBLY
1
A
Lift the tubes with handrails
Tips:
Open the package and take out the treadmill.Make sure there are no missing parts:

5
PARTSPRODUCT ASSEMBLY
2
Use Short Bolts (Part 6) & Arc Washers (Part 3) to fix the front of left & right
upright tubes with the base frame.
Then use Short Bolts (Part 6) & Round Washers (Part 2) to fix the side of left &
right upright tubes with the base frame. Finally, use the Lock Knob (Part 4) to fix
the base frame.
6
2
4
3
6

PARTSPRODUCT ASSEMBLY
3
Check if the connector wire cable between the upright tube and handrail is
connected well. Then lay down the handrails, use the preset bolts and washers
to fix the console to the upright tubes.
4
Lift up the control panel; fix the Stretch Knob (Part 5) to the left upright tube
5
6

PARTSPRODUCT ASSEMBLY
5
Put safety key and finish the assembly..
1
7

PARTS
FOLDING UP AND SETTING DOWN
FOLD:
1. Unscrew the fixed knob then lift the base frame. Pull out the stretch knob, aimed at the base
frame then release the knob to fix the machine. Move the machine.
FOLDING UP AND SETTING DOWN
Product name JK0805E-3
Voltage 110V
Frequency 50-60Hz
Speed 0.5-7.5MPH
8
UNFOLD:
1. Pull out the stretch knob then fall down the running board and fix the machine with the fixed
knob then use the machine after plug in.

PARTSCONSOLE INSTRUCTON
1. Check that the red power switch on the back of the machine is turned off.
2. The power supply socket should be turned off at the wall, then insert the power cable into the wall and
at the back of the machine.
3. Turn on the power supply at the wall and turn on the red power switch at the back of the machine.
4. Place the emergency stop safety key on the front of the console. Clip the other end of the safety key
onto your clothes and stand on the running belt facing the console.
5. Press the "STARTISTOP" key, the machine will start at 0.5mph/h after 3 seconds.
6. Press "+" key to increase the speed and "-" key to decrease the speed. The fastest speed is 7.5mph/h
and lowest is 0.5mph/h.
7. Press "+" key to increase the speed and "-" key to decrease the speed. The fastest speed is 7.5mph/h
and lowest is 0.5mph/h.
9. Touch the heart sensors with both hands, the screen will show heart rate frequency..
9
RESET
PROG
MODE
SPEED
START/STOP
-
+
8. 12 programs range from P1-P12. When in stand by PROG, press "PROG" key to set the programs then
press "STARTISTOP" to start the machine.
10. In case of emergency, please pull out safety key. The machine will stop very slowly.
11. To stop the machine you can also press the "STARTISTOP".
12. Press RESET key, all data will cleared to standby status.

TOTAL 12 PROGRAMS AS BELOW
10
1. The speed and time of the pre-set programs are fixed and cannot be changed.
The default time for the pre-set programs is 30 minutes.
0.5-7.5MPH/H
P1 P2 P3
P4 P5 P6
P7 P8 P9
P10 P11 P12

PARTSUSAGE OF SILICONE OIL
PARTSRUNNING BELT ADJUSTMENT
https://youtu.be/MksJIoi8Obo
Foryourconvenience,youcanscanthisQRcodetoseethevideofor
lubricatingtherunningbeltonYouTube,orinputthislinktowatch.

After installation video tutorial
11
RUNNING BELT SKEWS TO THE LEFT
RUNNING BELT SKEWS TO THE RIGHT
RUNNING BELT IS IN THE LOGJAM
1
2
3
Then make the machine running without loading 1-2 minutes.Please
Please adjust the belt like this to the middle position.
Please adjust the belt like this to the middle position.

https://youtu.be/uoXqZXk1Bx8
Foryourconvenience,youcanscanthisQRcodetoseethevideoon
YouTube,orinputthislinktowatch.

https://youtu.be/LGKKCk-yivM
Foryourconvenience,youcanscanthisQRcodetoseethevideo
onYouTube,orinputthislinktowatch.

STEP1:https://youtu.be/Xqri9ug5J7c
Foryourconvenience,youcanscanthisQRcodetosee
thevideoonYouTube,orinputthislinktowatch.

STEP2:https://youtu.be/nyZ75WFTZZw
（STEP1） （STEP2）
1
2
3
RUNNING BELT DEVIATE TO LEFT
RUNNING BELT DEVIATE TO RIGHT
RUNNING BELT LOGJAM
12
PARTSDAILY MAINTENANCE
1. Please disconnect power before checking the machine or cleaning.
2. Clear the belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.

PARTSEXERCISE GUIDE
Warm-up
Start each workout with of stretching and some light exercises. A proper warm-up5 to 10 minutes
Increase your body temperature, heart rate and circulation in preparation for exercise. Easy into
your exercise.
Training Zone Exercise
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your
Intensity for maximum performance. Breathe regularly and deeply as you exercise-never hold
you breathe.
Cool Down
Finish each workout with a light jog or walk for at least 1 minute. Then complete of 5 to 10 minutes
stretching to cool down. This will increase the flexibility of your muscles and will help prevent
post- exercise problems.
PLEASE NOTE: Before beginning any exercise program, consult your physician.
This is important especially if you are over the age of 45 or individuals with pre-existing health problem.
13

MAXIMUM
85%
70%
COOL DOWN
HEART RATE
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 7570 AGE
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS
EXERCISE. REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES
The most important factor here is the amount of effort you put in. The harder and longer you work the more calories
you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.
MADE IN CHINA
14

PARTSTROUBLE SHOOTING
15
If you are not sure about how to do that, please contact our customer service and we will provide the best solution for you.
Nosafetykeyonthepanel Putthesafetykeyonthepanel.
Nosafetykeyonthepanel
OverloadProtection
MOSProtection
Connectingwirecableloose/damage
fromthecontrolboard
Err
------
E5
E6
E7
E8
Connectingwirecableloose/damage
fromthecontrolboard
Connectingwirecableloose/damage
fromthecontrolboard
Removethemotorcoverandch
eckalltheconnectingwirecable.
Putthesafetykeyonthepanel.
Removethemotorcoverandchec
kalltheconnectingwirecable.
Pleaselubricatetherunningbelt
andcheckifthemotorworkswell.
MotororControlBoarddamaged,
pleasereplaceit.
Checkwhetherthemotorwireis
damagedorbroken.
Replacethecontrolboard.
Removethemotorcoverandcheck
alltheconnectingwirecable.
Replacethemotor.
Removethemotorcoverandcheck
alltheconnectingwirecable.
Electricmotordamage/broken
Connectingwirecableloose/damage
fromthecontrolboard

1
One year warranty Product Inquiry Orders FAQ Product Assembly Returns & Refunds
Dear Sir/Madam:
★★★★★Great products so far
February 24, 2018
Great product so far. Fast delivery, easy setup, and working without any issues.
With your inspiring rating, FYC will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
WARRANTY
If you have any issues with your orders, logistics,
items, etc, please contact us bythe following way.
Whatsapp: [phone]
Telephone: [phone] 83096029
Email: [email protected]
Your purchase includes a hassle-free Money Back Guarantee and a free replacement exchange for one year.
Within the warranty period, we provide the FREE replacement parts. If caused by incorrect assembly, incorrect
use or change of parts failures, our company takes no responsibility. You should show our products series no. and
relative pictures or videos or concern information before getting the warranty.
This treadmill is only for home use, if the problems occurred by commercial used, our company takes no
responsibility.