FYC JK88 User manual

Electric Folding
Treadmill
88
JK
Thank you very much for purchasing our product. Please read
this manual carefully before useing it
and keep the manual at the proper place.

As shoppers, we're always trying to find the
perfect balance between quality & value. At
here, we believe we've achieved that. Our
diverse catalog of everyday essentials is
tailored especially to our customers &
guaranteed to hit that sweet spot of high quality
& low price.
Always

1
ŸFor safety purpose, do not stand on running belt while start.
ŸPlease stop immediately if you experience any kind pain, including but not limited to
chest pains,nausea, dizziness, or cramp.
ŸPlease speed up slowly if needed.
ŸAdjustment of belt is prohibited during using.
ŸIt is suggested to wear sports shoes and gym suit while using this equipment.
ŸChildren, the elder, the pregnant, and patients are prohibited from using this treadmill.
ŸPlease clip the safety key on your clothing during using.
ŸPlease firmly hold the handle bars during using.
Ÿ
To avoid injury please read this manual carefully before operating this machine
ŸPlease put the treadmill on flat ground. It is unsuitable to put the treadmill at following
places:
ŸThe proper power for the treadmill is A.C 110V.
ŸError may appear on display if the power is not stable. Please do not use the same
socket together with computer, air conditioner etc.
ŸIt is suggested to wear sports shoes and gym suit while use the treadmill.
ŸPlease speed up or speed down slowly.
ŸMake sure no child or other object is near while folding or unfolding the treadmill.
ŸThe treadmill should not be located near water or wet object. Error or damage may be
caused if water or other liquids drop into the equipment.
1
SAFETY NOTICE
CAUTION
1
2Slant ground or slant places on balcony.
3Sunlight area or near heater.
4Noisy places.
Outdoors. (The treadmill is specially designed for indoor use only)

2
ŸIf you do not feel well before using, please consult your doctor or coach.
ŸPlease unplug the equipment when not in use.
ŸPlease unplug the treadmill before cleaning, moving or change parts for the treadmill.
ŸChildren, the elder and the pregnant are prohibited from using the treadmill. Patients
should consult their doctor before starting any exercise routine.
ŸPlease place the treadmill on a level flat surface. There should be 2M of clearance
behind thetreadmill.
ŸDo not start the treadmill when it is folded.
ŸKeep all electrical components, especially motor, power cord and plug, away from
water or other liquids.
ŸDo not wear clothes like long dress, which might catch on any part of the treadmill while
using.
ŸDo not place the treadmill in an area that will block any vent or air openings.
ŸDo not put any objects on the treadmill.
ŸPut away the plug from heated place or fire seat.
ŸPlease switch off all functions and unplug after using.
ŸDo not stand on the belt while you're preparing to use the treadmill.
ŸDo not disassemble the treadmill without consulting professional technicians.
ŸPlease make sure the running belt is fastened before using.
CAUTION DURING USE
Keep both the machine and power cord away from heated surfaces.

TOOLS REQUIRED
ALLEN WRENCH
(PROVIDED)
SILICONE OIL
(PROVIDED)
HARDWARE
PRODUCTS MAIN PARTS
Cup Holder
Console
2、
Heart Inductor
3、
Safety Key
4、
Upright Tube
5、
Motor Cover
6、
Side Rail
7、
Mobile Wheel
9、
3-Level Incline
10、
3
1、
330
SAPNNER
(PROVIDED)
Short Bolt
2 PCS
Safety Key Round Washer Arc Washers
1 PCS 2 PCS 2 PCS
123
4Long Bolt
2 PCS
5
1
23
4
5
6
7
8
9
10 11
End Cap
11、
Running Belt
8、

4
PARTS
HEADER RUNNINGDECK
PARTS
PARTSPRODUCT ASSEMBLY
1
First, remove the pre-install bolts & nuts at the top of the upright tubes.
Then lift the left and right poles respectively, and use the removed bolts & nuts to
fix the tubes with control panel.
AB

5
PARTSPRODUCT ASSEMBLY
2
Lift up the whole control panel with tubes.
Use & to fix the back of tubes with base. Short Bolt (part 4) Arc Washer (part 3)
Repeatedly the step to fix the right tubes.
Then connect the wire from control panel and right tube and put the control panel
back in the horizontal position.
NOTE: Please pay attention to the wire, do not let the control panel press it in case
of being damaged/broken.
Use & to fix the left side of tubes with base;Short Bolt (part 4) Round Washer (part 2)
2
5
4
3

PARTSPRODUCT ASSEMBLY
3
Connect the signal cable from the console and upright tube.
Then fix the panel to the upright tube with the pre-install screws on the support tube
on the console.
Please check if the connecting wire cable is connected well and not damaged/broken.
6

PARTSPRODUCT ASSEMBLY
4
Put safety key and finish the assembly.
1
7

PARTS
FOLDING UP AND SETTING DOWN
8
FOLDING UP:
1. Holding the rear end of deck directly by one hand and then lift the deck up until the Cylinder(A)
pops down into the locked position. Once you hear a sound like "click", the cylinder is in locked
position.
NOTE: Make sure the Power Switch is in OFF position and the power cord is unplugged from the electrical outlet.
Note: Make sure the Cylinder (A) 'pops' down securely into the locked position before moving the 2.
treadmill.
3. TO PREVENT ANY INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING UP
OR SETTING DOWN THE DECK.
SETTING DOWN:
1. Holding the rear end of deck by one hand and then use your foot to push the Cylinder(A) so as to
set down the deck of the treadmill.
Note: Do no stand under the deck when setting down the treadmill2.
Cylinder(A)