FYC JK1608-2 User manual

Electric Folding
Treadmill
Thank you very much for purchasing our product. Please read
this manual carefully before useing it
and keep the manual at the proper place.
1608-2
JK

As shoppers, we're always trying to find the
perfect balance between quality & value. At
FYC, we believe we've achieved that. Our
diverse catalog of everyday essentials is
tailored especially to our customers &
guaranteed to hit that sweet spot of high quality
& low price.
Always

1
ŸFor safety , do not stand on the running belt while starting.
ŸPlease stop using immediately if you feel vomiting or jerky during using.
ŸPlease speed up slowly if needed.
ŸAdjustment of belt is prohibited during using.
ŸIt is suggested to wear sports shoes and gym suit while using this equipment.
ŸChildren, the elder, the pregnant, and patients are prohibited from using this treadmill.
ŸPlease clip the safety key on your clothing during using.
ŸPlease firmly hold the handle bars during using.
To avoid injury please read this manual carefully before operating this machine
ŸPlease put the treadmill on the flat ground. It is unsuitable to put the treadmill in the
following places:
ŸThe proper power for the treadmill is A.C 110V.
ŸError may appear on display if the power is not stable. Please do not use the same
socket together with computer, air conditioner etc.
ŸIt is suggested to wear sports shoes and gym suit while useing the treadmill.
ŸPlease speed up or speed down slowly.
ŸMake sure no child or other objects is near while folding or unfolding the treadmill.
ŸThe treadmill should not be located near water or wet object. Error or damage may be
caused if water or other liquids drop into the equipment.
1
SAFETY NOTICE
CAUTION
1
2Slant ground or slant places on the balcony.
3Sunlight area or near heater.
4Noisy places.
Outdoors. (The treadmill is specially designed for indoor use only).

2
ŸIf you do not feel well before using, please consult your doctor or coach.
ŸPlease unplug the equipment when not in use.
ŸPlease unplug the treadmill before cleaning, moving or change parts for the treadmill.
ŸChildren, the elder and the pregnant are prohibited from using the treadmill. Patients
should consult their doctor before starting any exercise routine.
ŸPlease place the treadmill on a level flat surface. There should be 2M of clearance
behind thetreadmill.
ŸDo not start the treadmill when it is folded.
ŸKeep all electrical components, especially motor, power cord and plug, away from
water or other liquids.
ŸDo not wear clothes like long dress, which might catch on any part of the treadmill while
using.
ŸDo not place the treadmill in an area that will block any vent or air openings.
ŸDo not put any objects on the treadmill.
ŸPut away the plug from heated place or fire seat.
ŸPlease switch off all functions and unplug after using.
ŸDo not stand on the belt while you're preparing to use the treadmill.
ŸDo not disassemble the treadmill without consulting professional technicians.
ŸPlease make sure the running belt is fastened before using.
CAUTION DURING USE
Keep both the machine and power cord away from heated surfaces.

TOOLS REQUIRED
ALLEN WRENCH
(PROVIDED)
SILICONE OIL
(PROVIDED)
HARDWARE
Safety Key Round Washer Arc Washers
Short BoltLock Knob Stretch Knob
PRODUCTS MAIN PARTS
2、
Side Rail
7、
8、
3-Level Incline
11、
End Cap
12、
3
1、
1 PCS 2 PCS 2 PCS
4 PCS1 PCS 1 PCS
265
SAPNNER
(PROVIDED)
123
6
45
Mobile Wheel
10、
9、
5、
Running Belt
Cup Holder
Motor Cover
Upright Tube
Side Rail
6、
Safety Key
4、
3、Console
PAD Holder
Fixed Knob
2 PCS
7
1
23
4
5
6
7
8
9
10
11
12
Lock Knob

4
PARTS
RUNNINGDECK
PARTS
PARTSPRODUCT ASSEMBLY
1
Take the treadmill and spare parts bag out from the box, and place them on the floor.
A
DESK
B
B

5
PARTSPRODUCT ASSEMBLY
2
Unsrew the preset bolts & nuts at the top of tubes.
Attach the desk to the tubes, use the preset bolts & nuts to fix the desk to the tubes.

PARTSPRODUCT ASSEMBLY
3
Lift up the whole panel.
Use Short Bolt (Part 6) & Arc Washers (Part 3) to fix the front side of the tubes;
6
2
6
3
6
use Short Bolt (Part 6) & Round Washers (Part 2) to fix the left/right side of the tubes.
Check if the connecting wire cable is in good condition and connected well.
Then thread the cable into the tube.

PARTSPRODUCT ASSEMBLY
4
Lay down the desk, use Fixed Knob (part 7) to fix the desk with tubes.
Use Lock Knob (Part 4) to fix the desk to the tubes. Screw in Stretch Knob (Part 5).
4
1
5
7
Put the safety key and the assembly is finished.
7

PARTSPRODUCT ASSEMBLY
5
Lift the pad holder, and lift the clip at the back of pad holder,
you can adjust the angle of pad holder.
8

PARTS
FOLDING UP AND SETTING DOWN
FOLDING UP AND SETTING DOWN
Product name JK1608-2
Voltage 110V
Frequency 50-60Hz
Speed 0.5-7.5MPH
BLUETOOTH SETUP
Bluetooth
Bluetooth
1. Turn off the treadmill or power off the treadmill.
Unscrew the Fixed Knob (Part 7) under the control desk and lift the desk.2.
Unscrew the Lock Knob (Part 4) on the base frame. 3.
Lift the base frame to the place where the Stretch Knob (Part 5) can put in to fix the base frame.4.
FOLD:
4
7
5
9

PARTSCONSOLE INSTRUCTON
1. Check that the red power switch on the back of the machine is turned off.
2. The power supply socket should be turned off at the wall, then insert the power cable into the
socket.
3. Turn on the power supply at the wall and turn on the red power switch at the back of the
machine.
4. Place the emergency safety key on the front of the console. Clip the other end of the safety key
onto your clothes and stand on the running belt facingthe console.
5. Press the " " key, the machine will start at 0.5MPH after 3 seconds, when machine is running,
press this key and the machine will stop slowly.
6. Press the " " " "key, the machine will start at 0.5MPH after 3 seconds, when machine is
running, press this key and the machine will stop slowly.
7. Press" "key, the screen will show Time/Step, Speed, Distance/Calories,data will be shown
every 5 seconds. Press" " key and it will be stay in" " key to selectfixed mode. When machine
is in standby status, pressuser required Time, Distance or Calories, then press " " or " "key to
set required value. Time set range 5:00-99:00, Distance set range 1-99, Calories set range 20-
990.
+-
M
M M
+-
10

TOTAL 12 PROGRAMS AS BELOW
1. When machine is in standby status, press this" "key to select P1-P12."
Then press " "key: the machine will run at the selected program.
When program is selected, the default time value is 30 minutes.
User can press "+"or "-"key to increase or decrease the time.
The formula of time and speed change is TIME/20*60s as below:
2
2
2
2
2
2
2
2
2
2
2
3
2
3
2
4
3
3
4
3
5
4
4
3
3
4
2
6
4
4
6
5
3
3
7
5
3
5
3
7
6
5
5
6
7
7
7
7
4
5
3
6
7
4
7
3
4
5
3
4
4
7
6
7
7
4
5
4
2
5
5
4
4
4
2
6
7
7
4
3
4
4
7
7
5
5
6
7
7
4
2
5
7
7
7
7
4
2
5
6
7
7
7
7
7
2
2
2
4
2
2
2
2
2
2
2
2
2
3
3
6
3
3
5
3
5
5
3
4
4
7
4
3
7
5
3
3
3
5
5
6
7
7
7
7
6
4
5
6
2
5
6
7
4
5
6
2
4
5
5
5
5
5
4
4
6
4
7
6
7
7
7
7
7
7
4
3
5
4
6
6
5
7
6
7
7
6
7
5
7
7
5
5
4
5
7
7
7
7
7
7
7
7
4
7
5
7
77
4 4
7
7 6 7
7
7
7
7
4
7
4
6
6
7
4
4
5
7
4
5
6
4
6
4
6
5
4
7
5
P
2. In case of emergency, please pull out safety key. The machine will stop very slowly.
11

PARTSREMOTE CONTROL INSTRUCTION
1. Function of the Remote Control
(1) In standby or countdown mode: Press" " button to start themachine. Please note that
the default speed is 0.5MPH.
Choose the preset program: Press " " to choose P1-P12, andthen press " " to start
the machine, the speed will changeaccording to the preset speed.
2.1 "Start/Stop":
(2) In running state: Pressing" ", then the treadmill will stopslowly and back to standby
state.
2.2 "+"/"-"
"+"/"-"button is to adjust speed. Keep pressing "+" or "-" button over 0.5 seconds, the
speed will keep increasing or decreasing. The speed will change by 0.1 MPH.
2.2 "M"
"M": In standby mode: it can switch from different mode, including Time, Distance and
Calories.
In running mode: press "M" button will switch display mode between cyclic display
mode and single display mode.
1
2
"P": There are P01-P12, totally 12 preset programs you can choose when in standby mode.
2.4 "P"
Press the " " button to mute the treadmill (no sound "Bi"); press it again to resume the
beep sound.
2.5
After using, press " " button, the treadmill will stop slowly and it will retain its data until power
off. It will resume the previous speed when it starts again.
2.6
P
12

ABOUT THE REMOTE CONTROL
3.1 Pull out the insulating sheet, you can use the remote control directly.
3.2 The remote control can directly control the treadmill.
3.3 If you have purchased multiple treadmills, in order to prevent the treadmills from
interfering with each other, please perform the following operations to match:
3.3.1 Tum on the one of treadmills.
3.3.2 Simultaneously press the and buttons together on the remote control for 5 seconds. The display
screen will flash, and the treadmill will match the remote control.
3.3.3 Please note: After matching the remote control, if remote control is replaced,please rematch it with the
above step.
HOW TO MATCH A NEW REMOTE CONTROL
4.1 Power off the treadmill.
4.2 Press the "speed -" in the treadmill and "M" button
in the remote control at the same time, then keep pres
sing for 6 seconds.
4.3 Start the treadmill within 5 seconds, the remote con
trol will match the machine.
" ": Press the " " button, the data will be reset to its default data. It only works
when the treadmill is in standby mode.
2.7
13

PARTSUSAGE OF SILICONE OIL
PARTSRUNNING BELT ADJUSTMENT
https://youtu.be/MksJIoi8Obo
Foryourconvenience,youcanscanthisQRcodetoseethevideofor
lubricatingtherunningbeltonYouTube,orinputthislinktowatch.

After installation video tutorial
RUNNING BELT SKEWS TO THE LEFT
RUNNING BELT SKEWS TO THE RIGHT
RUNNING BELT IS IN THE LOGJAM
1
2
3
Then make the machine running without loading 1-2 minutes.Please
Please adjust the belt like this to the middle position.
Please adjust the belt like this to the middle position.
14

https://youtu.be/uoXqZXk1Bx8
Foryourconvenience,youcanscanthisQRcodetoseethevideoon
YouTube,orinputthislinktowatch.

https://youtu.be/LGKKCk-yivM
Foryourconvenience,youcanscanthisQRcodetoseethevideo
onYouTube,orinputthislinktowatch.

PARTSDAILY MAINTENANCE
STEP1:https://youtu.be/Xqri9ug5J7c
Foryourconvenience,youcanscanthisQRcodetosee
thevideoonYouTube,orinputthislinktowatch.

STEP2:https://youtu.be/nyZ75WFTZZw
（STEP1） （STEP2）
1
2
3
1. Please disconnect power before checking the machine or cleaning.
2. Clear the belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.
RUNNING BELT DEVIATE TO LEFT
RUNNING BELT DEVIATE TO RIGHT
RUNNING BELT LOGJAM
15

PARTSEXERCISE GUIDE
Warm-up
Start each workout with of stretching and some light exercises. A proper warm-up5 to 10 minutes
Increase your body temperature, heart rate and circulation in preparation for exercise. Easy into
your exercise.
Training Zone Exercise
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your
Intensity for maximum performance. Breathe regularly and deeply as you exercise-never hold
you breathe.
Cool Down
Finish each workout with a light jog or walk for at least 1 minute. Then complete of 5 to 10 minutes
stretching to cool down. This will increase the flexibility of your muscles and will help prevent
post- exercise problems.
PLEASE NOTE: Before beginning any exercise program, consult your physician.
This is important especially if you are over the age of 45 or individuals with pre-existing health problem.
16

MAXIMUM
85%
70%
COOL DOWN
HEART RATE
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 7570 AGE
THIS IS HOW YOUR PULSE SHOULD BEHAVE DURING GENERAL FITNESS
EXERCISE. REMEMBER TO WARM UP AND COOL DOWN FOR A FEW MINUTES
The most important factor here is the amount of effort you put in. The harder and longer you work the more calories
you will burn. Effectively this is the same as if you were training to improve your fitness, the difference is the goal.
MADE IN CHINA
17

PARTSTROUBLE SHOOTING
If you are not sure about how to do that, please contact our customer service and we will provide the best solution for you.
Nosafetykeyonthepanel Putthesafetykeyonthepanel.
Nosafetykeyonthepanel
OverloadProtection
MOSProtection
Connectingwirecableloose/damage
fromthecontrolboard
Err
------
E5
E6
E7
E8
Connectingwirecableloose/damage
fromthecontrolboard
Connectingwirecableloose/damage
fromthecontrolboard
Removethemotorcoverandch
eckalltheconnectingwirecable.
Putthesafetykeyonthepanel.
Removethemotorcoverandchec
kalltheconnectingwirecable.
Pleaselubricatetherunningbelt
andcheckifthemotorworkswell.
MotororControlBoarddamaged,
pleasereplaceit.
Checkwhetherthemotorwireis
damagedorbroken.
Replacethecontrolboard.
Removethemotorcoverandcheck
alltheconnectingwirecable.
Replacethemotor.
Removethemotorcoverandcheck
alltheconnectingwirecable.
Electricmotordamage/broken
Connectingwirecableloose/damage
fromthecontrolboard
18