Garden Furniture Direct Ambleside disabled access picnic bench User manual

1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Tools required
Package contents
1 x Table top
2 x Seats
3 x Table A frames
2 x Cross braces
20 x M8 Coach screws
Cover caps
10mm socket or spanner
The Ambleside disabled access picnic bench
GaGarden
rnitu reFuu
Direct
T: 03333 448 121
ASSEMBLY
INSTRUCTIONS
Ambleside disabled
access picnic bench

Ambleside disabled access picnic bench
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Lay the table top upside down on a clean, flat surface
taking care not to damage it.
Step 3
Step 4
Place one of the table A-frames centrally against the
fixing batten ensuring that the gap at the table edge
is the same on both sides.
Using 2 of the supplied coach screws and the pre
drilled holes, secure the table A-frame to the fixing
batten on the table top.

Ambleside disabled access picnic bench
3
Step 5
Step 6
Repeat steps 3 & 4 for the remaining 2 A-frames so
that they match the image above and the centre A-
frame is oriented as shown.
Position one of the braces as shown ensuring that it is
aligned centrally along the table top and that it is
flush with the A-frame before proceeding to step 7.
Step 7
Step 8
Secure the brace to the A-frame using one of the
coach screws and secure the other end to the table
top as shown in step 6.
Repeat steps 6 & 7 for the other end of the bench so
that both braces are connected.

Ambleside disabled access picnic bench
4
Step 9
Step 10
Now turn the bench assembly right side up ready to
attach the seats.
Line up the short seat panel as shown and attach to
the A-frame with 2 coach screws in each end.
Step 11
Step 12
Line up the longer seat panel in the same way as step
10 and attach to the A-frame with 2 coach screws in
each end plus a further 2 screws to attach it to the
central A-frame as shown above.
Finally, cover any exposed coach screw heads
with the cover caps provided. Your Ambleside
disabled access picnic bench is now complete.
GardenFurniture.Direct i a trading tyle of LTK Sco Limited
Regi tered in England & Wale - Regi tered No. 6282947
We hope that you found your product quick and ea y to a emble.
However, if you require any further a i tance or have any que on you can
contact u by telephone on: 03333 448 121 or vi it www.gardenfurniture.direct