Gardenline 22095-18 User manual

AFTER SALES SUPPORT 1
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA
User Manual
Manual
del usuario
GAZEBO WITH NETTING
English.... Page 3
Español.... Página 19
GLORIETA CON MALLA

AFTER SALES SUPPORT 3
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA
Geng Started
Ensure all parts packaged in carton match the parts list.
Remove all protecve materials and place parts on a
non-abrasive surface to avoid scratching. If any parts are
missing or damaged, DO NOT aempt to assemble. Please
contact our customer service center (Monday-Friday
9:00am – 5:00pm EST) at 1-800-599-8898.
Cauon
Read all the instrucons before assembly. Failure to
comply with instrucons may result in faulty assembly and
potenal injury! Assemble product on a so, non-abrasive
surface such as a carpet or cardboard to avoid damaging
the item. Seek assistance to assemble bulky or heavy items.
Aer nal alignment, make sure all bolts and nuts are
securely ghtened with screw covers pressed in place.
Cleaning & Maintenance
Wash canopy with a mild soluon of soap and water; rinse
thoroughly. Dry completely.
Getting Started
Contents • Contenido
Geng Started .................................. 3
Parts List ............................................. 4
Parts Diagram ..................................... 6
Assembly Instrucons ........................ 7
Warranty ............................................ 15
Warnings & Cauons .......................... 17
Para comenzar .................................. 19
Lista de piezas .................................... 20
Diagrama de las piezas ....................... 22
Instrucciones de ensamblaje .............. 23
Garana ............................................ 31
Advertencias y precauciones .............. 33

4 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
AFTER SALES SUPPORT 5
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA USA
Pack Contents / Parts
Pack contents / parts
APole
BLe Frame
CRight Frame
DCanopy Two-Tier Ribs
ECorner Canopy Rib
FCanopy Middle Rib
GSupport
HFeet
IConnector
JFrame Connector
KSmall Canopy
LMain Canopy
MNeng Panel
NPlasc Ring
OStake
PM6 x 15mm Screws
RScrew Ring
SWrench
TRope
Parts List
OT
P R
I
ND
L
K
G
A
H
C
JEFB
M
Descripon Qty Descripon Qty
A Pole 4 K Small Canopy 1
BLe Frame 4L Main Canopy 1
CRight Frame 4M Neng Panel 1
D Canopy Two-Tier Ribs 4N Plasc Ring 32
ECorner Canopy Rib 4O Stake 12
F Canopy Middle Rib 4P M6 x 15mm Screws 56
GSupport 8 RScrew Ring 4
HFeet 4S Wrench 1
I Connector 1 T Rope 4
JFrame Connector 8

6 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
AFTER SALES SUPPORT 7
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA USA
Assembly Instructions
P
4X
Fig. 1
A
H
R
Fig. 2
STEP 1:
Insert Foot (H) into the bottom of Pole (A). Insert one Screw M6x15mm
(P) through Pole (A) and into Foot (H). Insert one Ring Screw (R) through
opposite side of Pole (A) and into Foot (H); tighten both screws down to
hold parts together. See Fig. 2 for further reference.
Repeat these steps to assemble the remaining Poles (A).
Parts Diagram
A
B
J
H
G
F
E
D
C
B
A
S
NP
P R
(4) M6X15 mm Screw (4) Screw Ring
I
K
L
M
O
RT
*Please review Fig. 1 and Fig. 2 to see correct orientation of Pole (A)
when inserting Ring Screw (R).

8 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
AFTER SALES SUPPORT 9
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA USA
Fig. 2
B
4X
J
P
C
J
P
Fig. 1
P
Fig. 1
C
B
P
C
G
C
B
C
B
B
Fig. 2
Assembly Instructions
STEP 2:
Bring one Left Frame (B) and Right Frame (C) together so their open
ends meet. Insert one Screw M6x15mm (P) through Frame Connector
(J) and into the lower bar of Left Frame (B). Insert one Screw M6x15mm
(P) through Frame Connector (J) and into the lower bar of Right Frame
(C); see Fig. 1.
STEP 3:
Place Frame Connector (J) against the top bars of where these parts
meet. Insert one Screw M6x15mm (P) through Frame Connector (J) and
into Left Frame (B). Do not insert any screws through Frame Connector
(J) and into Right Frame (C). This will be completed in a later step in this
manual.
Repeat these steps to assemble the remaining Left Frames (B) and Right
Frames (C) together.
Assembly Instructions
STEP 4:
Place Left Frame (B) of an assembled frame against Pole (A). Please
note that the Ring Screw (R) should be below where Left Frame (B) is
being connected to Pole (A). Insert two Screws M6x15mm (P) through
Left Frame (B) and into Pole (A). On the adjacent side of the same Pole
(A), insert two Screws M6x15mm (P) through Right Frame (C) of a second
assembled frame; see Fig 1.
STEP 5:
Insert one Screw M6x15mm (P) through Support (G) and into the bottom
of Right Frame (C). Insert one Screw M6x15mm (P) through Support
(G) and into the bottom of Left Frame (B). Insert second M6x15mm (P)
through opposite ends of both Supports (G) and into Pole (A). See Fig.
2 for further reference.
Repeat these steps to connect assembled Left Frame (B) and Right
Frame (C), and Supports (G) with remaining Poles (A).
P
(12) M6X15 mm Screw
P
(32) M6X15 mm Screw
*Before inserting any screws, please review Fig. 1 and Fig. 2 above to
see the correct orientation of the parts in this step. Note that the rail
intended for the Netting Panels (M) should be facing inward and both
Frame Connectors (J) should be facing outward of an erected unit. Do
not tighten screws down completely during this portion of assembly.
*Please review Fig. 1 to see correct orientation of Left Frame (B) and
Right Frame (C) with Pole (A). Please note this figure is looking at
this corner from a prospective inside an erected unit. Part C is on
the left side of A and part B is on the right when on the inside of the
gazebo frame. Do not tighten screws down completely during this
portion of assembly.

10 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
AFTER SALES SUPPORT 11
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA USA
Assembly Instructions
I
Fig. 2
D
I
E
F
Fig. 1
DF
STEP 6:
Insert Canopy Two Tier Ribs (D) into the four longer tubes of Connector
(I); see Fig. 1. Insert Canopy Middle Ribs (F) into four shorter tubes of
Connector (I); see Fig. 1. Insert Corner Canopy Ribs (E) into Canopy Two
Tier Ribs (D); see Fig. 2.
Assembly Instructions
P
Fig. 2
P
Fig. 1
C
STEP 7:
Place assembled ribs with connector over the height of assembled
frame. Insert Screws M6x15mm (P) through the ends of Corner Canopy
Ribs (E) and into the tops of Poles (A); see Fig. 1. Insert Screws M6x15mm
(P) through the ends of Canopy Middle Ribs (F), through Frame
Connector (J), and into the Right Frame (C); see Fig. 2.
*Complete assembly by securely tightening all screws.
P
(8) M6X15 mm Screw

12 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
AFTER SALES SUPPORT 13
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA USA
K
Fig. 2
K
L
N
M
Fig. 1
Fig. 3
STEP 8:
Place Small Canopy (K) over upper bars of Canopy Two Tier Ribs (D) so
that pockets underneath canopy fit into those rib ends; see Fig. 1.
STEP 9:
Place Main Canopy (L) over lower bars of Canopy Two Tier Ribs (D)
and canopy ribs. Unfold Main Canopy (L) completely so that pockets
underneath canopy fit into these rib ends; see Fig. 1.
STEP 10:
Place Plastic Rings (N) through grommets found at the top of the
Netting Panels (M) and through the rail found on parts Left Frame (B)
and Right Frame (C); see Fig. 2.
*Note that the stitching found on the netting, as well as a white tag
should be facing inward. Having the panels facing in the wrong
direction will prevent the netting from being drawn open and tied
down to the poles.
Use the ties found at the bottom of the Netting Panels (M) to secure the
panels by running them through the Screw Ring (R) and around the
Poles (A); see Fig. 3.
Assembly Instructions
T
O
O
HFig. 2
Fig. 1
STEP 11:
Run two Stakes (O) through designated holes found on Feet (H) at the
bottom of each Pole (A). Screw Stakes (O) while inserting them into the
ground for extra stability; see Fig. 1.
STEP 12:
Run Rope (T) through loops found at the tops of the four corners of the
Main Canopy (L). Secure the Rope (T) by tying a knot at this end. Secure
the opposite ends of the Ropes (T) to Stakes (O) also by tying knots; see
Fig. 2. Insert the four Stakes (O) into the ground by screwing them in
place. When completed, the Ropes (T) should be tightly drawn.
Assembly Instructions

14 AFTER SALES SUPPORT
[email protected] 1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA
Note: In case of adverse weather conditions or strong wind, please
remove the Main Canopy (N) from the gazebo.
The gazebo is designed to provide shade only. Do not use this gazebo
in strong wind and rain. Wind and rain can damage the gazebo and
could result in injury to you and others. It is not waterproof and not
intended for use in the rain. The water will sit on the canopy fabric
and severely damage the gazebo. Do not use or set up in rain, wind or
stormy conditions.
This product is designed for leisure use only and is not a shelter against
adverse weather conditions.
Assembly Instructions
Your details:
Date of purchase
Name
Address
E mail
Locaon of purchase
Descripon of malfuncon:
Return your completed
warranty card with the faulty
product to:
TDC USA, Inc.
5 Industrial Road
Fairfield, NJ 07004
United States of America
[email protected]
* We recommend you keep the receipt with this warranty card. You must include a copy of your receipt
WARRANTY CARD
GAZEBO WITH NETTING
Phone lines available
Monday to Friday
9am - 5pm EST.
[email protected]
1800 599 8898
USA
MODEL:
GAZEBO WITH NETTING MODEL: 21994-18 04/2018
7884
YEAR WARRANTY
2

ALDI INC. FULL WARRANTY CONDITIONS
Dear Customer:
The ALDI warranty is a full warranty oering you the following benets:
Warranty period: 2 years* from date of purchase.
Costs: Free repair, exchange, or refund.
No transport costs.
ADVICE Please contact our service hotline by phone, email or
fax before sending the device. This allows us to provide
support in the event of possible operator errors.
In order to make a claim under the warranty, please send us:
The faulty item with all component parts, the original receipt, and the
warranty card properly completed.
The warranty does not cover damage caused by:
Accident or unancipated events to frame [metal parts] (e.g. wind,
snow, lighng, re).
Deterioraon, fading, sagging, or unancipated events to canopies
and neng panels (e.g. wind, sun, rain, pets/animals).
Improper use or transport.
Failure to follow safety and maintenance instrucons.
Other improper treatment or modicaon.
Aer the expiraon of the warranty period, you may have your product
repaired at your own expense. You will be noed of the repair costs in
advance.
This warranty gives you specic legal rights, which may vary from state to state
that are not intended to exceed statutory minimum requirements beyond what
is included above.
This warranty does not limit the statutory obligaon of the seller arising
from any implied warranes. The period of warranty can only be extended in
accordance with applicable law.
Warnings & Cauons
1. When storing, do not re-pack your gazebo unl completely dry.
2. This gazebo must be assembled by two or more adults.
3. The gazebo canopy must not be le aached in windy or extreme
condions.
4. Loading limit of the hook is 10 lbs.
5. Steel components for garden accessories and furniture are treated with
rust-inhibing paint that protects them from rust. However, due to the
nature of steel, surface oxidaon (rusng) will occur if this protecve
coang is scratched. This is a natural process. To minimize this condion,
it is recommended that care be taken when assembling and handling the
product in order to prevent the paint from being scratched. If scratching
or damage occurs, it is recommended that the area be touched-up
immediately with rust-inhibing paint. Surface rust can be removed easily
using a very light applicaon of common cooking oil. If surface oxidaon
(rusng) occurs and no measures are taken to correct it, the oxidaon may
start dripping on the deck or pao, which may cause damaging strains that
can be dicult to remove.
WARNING
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM CANOPY
FABRIC. This tent is made with fabric that meets CPAI-84 specicaons
for ame resistance. It is not re proof. The fabric will burn if le in
connuous contact with any ame source.

AFTER SALES SUPPORT 19
1800 599 8898 [email protected]
MODEL: 22095-18 PRODUCT CODE: 7884 04/2018
USA
Para comenzar
Compare todas las piezas incluidas en la caja con la lista de
piezas. Quite todos los materiales de protección y ponga
las piezas sobre una supercie no abrasiva para evitar que
se rayen. Si falta alguna pieza, NO intente ensamblar la
unidad. Llame a nuestro centro de atención al cliente (de
lunes a viernes de 9:00 a.m. a 5:00 p.m. EST) al
1-800-599-8898.
Precauciones
Lea todas las instrucciones antes de ensamblar la unidad.
¡No hacerlo puede resultar en un ensamblaje incorrecto,
lo que puede ocasionar lesiones! Ensamble la unidad
sobre una supercie blanda y no abrasiva, tal como
una alfombra o cartón, para evitar dañarla. Pida ayuda
para ensamblar las partes pesadas y voluminosas. Tras
la alineación nal, asegúrese de que todos los pernos y
tuercas estén rmemente apretados y estén cubiertos con
los embellecedores.
Limpieza y mantenimiento
Lavar el toldo con una solución de agua y jabón suave;
enjuáguelo bien. Secar completamente.
Para comenzar
SERVICIO POSVENTA
.