GE QuickPanel+ IC755CxS06RDx User manual

GE
Automation & Controls
Operator Interface Products
QuickPanel+Operator Interface
IC755CxS06RDx (6” Display)
IC755CxW07CDx (7” Display)
IC755CxS10CDx (10” Display)
IC755CxS12CDx (12” Display)
IC755CxS15CDx (15” Display)
Quick Start Guide, GFK-2893K
Dec 2015

2 QuickPanel+Quick Start Guide GFK-2893K
Safety Symbol Legend
Warning
Indicates a procedure, condition,
or statement that, if not strictly
observed, could result in
personal injury or death.
Caution
Indicates a procedure, condition,
or statement that, if not strictly
observed, could result in
damage to or destruction of
equipment.
Attention
Indicates a procedure, condition,
or statement that should be
strictly followed to optimize
these applications.

GFK-2893K QuickPanel+ Quick Start Guide 3
1. Physical Characteristics
The following diagrams illustrate the physical layout of
the QuickPanel+Operator Interface, including
locations of status LEDs, communications ports, and
connectors.
SD Card
USB Device
LINE OUT
MIC IN
Input Power LAN USB Host Ports
Serial Interface
LCD Active Area
115.2 x 86.4 mm
(4.5 x 3.4 in)
115.2 mm
(4.5 in)
192 mm (7.56 in) x 2 36 mm (1.42 in) x 2
137 mm (5.39 in) x 2
183.50 mm (7.22 in)
75 mm (2.95 in)
75 mm (2.95 in)
128.50 mm (5.06 in)
144.7 mm (5.70 in)
Effective Screw Depth 6 mm (0.24 in) Product Nameplate
Battery Cover
License Label
IC755CxS06RDx Profile and Hardware Features
Note: Refer to the table IC755CxW06CDx
Specifications for drawing dimensions.

4 QuickPanel+Quick Start Guide GFK-2893K
Battery
Cover
COM
USB Host
Ports
LAN
Input
Power
SD Card
MICRO USB
LINE OUT
MIC IN
Status
Indicator LED
Touchscreen
LCD
IC755CxW07CDx Profile and Hardware Features
Note: Refer to the table IC755CxW07CDx
Specifications for drawing dimensions.

GFK-2893K QuickPanel+ Quick Start Guide 5
Status
Indicator LED
Touchscreen
LCD
SD Card
USB
Host
Ports
MICRO
USB
LAN2 COM1
LAN1 Input
Power
LINE
OUT
COM2
IC755CxS10CDx Profile and Hardware Features
Note: Refer to the table IC755CxS10CDx
Specifications for drawing dimensions.

6 QuickPanel+Quick Start Guide GFK-2893K
IC755CxS12CDx Profile and Hardware Features
Note: Refer to the table IC755CxS12CDx
Specifications for drawing dimensions.

GFK-2893K QuickPanel+ Quick Start Guide 7
Touchscreen
LCD
Status
Indicator
LED
SD Card
Input
Power
LINE
OUT
USB
Host
Ports
MICRO
USB COM2
LAN2 COM1
LAN1
IC755CxS15CDx Profile and Hardware Features
Note: Refer to the table IC755CxS15CDx
Specifications for drawing dimensions.

8 QuickPanel+Quick Start Guide GFK-2893K
2. Specifications
2.1 Physical Specifications and Mounting Options
IC755CxS06RDx Specifications
Item
Specification
Processor
Freescale i.MX535
(1 GHz ARM Cortex A8)
Memory
RAM
DDR3 SDRAM 512 MB
ROM
NAND FLASH 256 MB
SRAM
512 KB (with battery backup)
Operating System
Microsoft Windows
Embedded Compact 7
Display
Type
5.7” TFT LCD
Resolution
320(W) x 240(H) pixels QVGA
Color
65,536
Brightness
375 cd/m2
Backlight
LED
Touchscreen
Touch Panel
Type
Analog Resistive
Multi-touch
Single-touch
Communications
Ethernet Port
1x10 Base-T / 100 Base-TX
Serial Port
1x RS-232C (COM1)
(5-pin connector)
USB, Host
2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)
USB, Device
1x USB 2.0 (mini Type-B)
Storage
1x SD/SDHC card slot
Audio
1x Mic In (Mono)
(3.5 mm jack),
1x Line Out (Stereo)
(3.5 mm jack)
Noise Immunity
Noise Voltage
1500 V p-p
Pulse Duration
1 μs
Rise Time
1 ns
Input power
Rated Voltage
24 V dc ±20%
(3-pin connector)
Power
Consumption
15 W maximum
Frame Ground
(FG)
Frame GND connected
internally to Signal GND
Dimensions (L×W×D)
192 × 137 × 36 mm
(7.56 × 5.39 × 1.42 in)
Weight
0.7 Kg (1.54 lb)
Mounting
Options
Panel Cutout
Dimensions
183.50 × 128.50 mm
(7.22 × 5.06 in)
VESA Mount
75 x 75 mm (2.95 x 2.95 in)

GFK-2893K QuickPanel+ Quick Start Guide 9
IC755CxW07CDx Specifications
Item
Specification
Processor
Freescale i.MX535
(1 GHz ARM Cortex A8)
Memory
RAM
DDR2 SDRAM 512 MB
ROM
SLC NAND 256 MB
SRAM
512 KB (with battery backup)
Operating System
Microsoft Windows
Embedded Compact 7
Display
Type
7” Widescreen TFT LCD
Resolution
800(W) x 480(H) pixels WVGA
Color
65,536
Brightness
310 cd/m2
Backlight
LED
Touchscreen
Touch Panel
Type
Projected Capacitive
Multi-touch
Two-point
Communications
Ethernet Port
1x 10/100Base-T (RJ-45)
Serial Port
1x RS-232 UART port
(5-pin connector)
USB, Host
2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)
USB, Device
1x USB 2.0 (mini Type-B)
Storage
1x SD/SDHC card slot
Audio
1x Mic In (Mono)
(3.5 mm jack),
1x Line Out (Stereo)
(3.5 mm jack)
Noise Immunity
Noise Voltage
1500 V p-p
Pulse Duration
1 μs
Rise Time
1 ns
Input power
Rated Voltage
24 V dc ±20%
(3-pin connector)
Power
Consumption
15 W maximum, 0.625 A
Frame Ground
(FG)
Frame GND connected
internally to Signal GND
Dimensions (L×W×D)
192 × 137 × 36 mm
(7.56 × 5.39 × 1.42 in)
Weight
0.80 Kg (1.76 lb)
Mounting
Options
Panel Cutout
Dimensions
183.50 × 128.50 mm
(7.22 × 5.06 in)
VESA Mount
75 x 75 mm (2.95 x 2.95 in)

10 QuickPanel+Quick Start Guide GFK-2893K
IC755CxS10CDx Specifications
Item
Specification
Processor
Freescale i.MX535
(1 GHz ARM Cortex A8)
Memory
RAM
DDR3 SDRAM 1 GB
ROM
SLC NAND 512 MB
SRAM
512 KB (with battery backup)
Operating System
Microsoft Windows
Embedded Compact 7
Display
Type
10.5” Standard TFT LCD
Resolution
800(W) x 600(H) pixels SVGA
Color
65,536
Brightness
400 cd/m2
Backlight
LED
Touchscreen
Touch Panel
Type
Projected Capacitive
Multi-touch
Two-point
Communications
Ethernet Port
2x 10/100Base-T (RJ-45)
Serial Port
1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)
USB, Host
2x USB 2.0 (Type-A)
Maximum power (5 V at 0.5 A)
USB, Device
1x USB 2.0 (mini Type-B)
Storage
1x SD/SDHC card slot
Audio
1x Line Out (Stereo)
(3.5 mm jack)
Noise Immunity
Noise Voltage
1500 V p-p
Pulse Duration
1 μs
Rise Time
1 ns
Input power
Rated Voltage
12/24 V dc ±20%
(3-pin connector)
Power
Consumption
18 W maximum, 1.5 / 0.75 A
Frame Ground
(FG)
Frame GND connected
internally to Signal GND
Dimensions (L×W×D)
278 × 222 × 65 mm
(10.95 × 8.74 × 2.56 in)
Weight
2.40 kg (5.29 lbs)
Mounting
Options
Panel Cutout
Dimensions
266 × 210 mm (10.47 × 8.27 in)
VESA Mount
100 x 100 mm (3.94 x 3.94 in)

GFK-2893K QuickPanel+ Quick Start Guide 11
IC755CxS12CDx Specifications
Item
Specification
Processor
Freescale i.MX535
(1 GHz ARM Cortex A8)
Memory
RAM
DDR3 SDRAM 1 GB
ROM
SLC NAND 512 MB
SRAM
512 KB (with battery backup)
Operating System
Microsoft Windows
Embedded Compact 7
Display
Type
12.1” Standard TFT LCD
Resolution
800(W) x 600(H) pixels SVGA
Color
65,536
Brightness
450 cd/m2
Backlight
LED
Touchscreen
Touch Panel
Type
Projected Capacitive
Multi-touch
Two-point
Communications
Ethernet Port
2x 10/100Base-T (RJ-45)
1x 10/100Base-T (RJ-45) for
IC755CxS12CDA
Serial Port
1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)
(1x 10-pin connector for
IC755CxS12CDA)
USB, Host
2x USB 2.0 (Type-A
Maximum power (5 V at 0.5 A)
USB, Device
1x USB 2.0 (mini Type-B)
Storage
1x SD/SDHC card slot
Audio
1x Line Out (Stereo)
(3.5 mm jack)
Noise Immunity
Noise Voltage
1500 V p-p
Pulse Duration
1 μs
Rise Time
1 ns
Input power
Rated Voltage
12/24 V dc ±20%
(3-pin connector)
Power
Consumption
30 W maximum, 2.5 / 1.25 A
Frame Ground
(FG)
Frame GND connected
internally to Signal GND
Dimensions (L×W×D)
314 × 248 × 65 mm
(12.36 × 9.76 × 2.56 in)
Weight
3 kg (6.61 lbs)
Mounting
Options
Panel Cutout
Dimensions
302 × 228 mm (11.89 × 8.98 in)
VESA Mount
100 x 100 mm (3.94 x 3.94 in)

12 QuickPanel+Quick Start Guide GFK-2893K
IC755CxS15CDx Specifications
Item
Specification
Processor
Freescale i.MX535
(1 GHz ARM Cortex A8)
Memory
RAM
DDR3 SDRAM 1 GB
ROM
SLC NAND 512 MB
SRAM
512 KB (with battery backup)
Operating System
Microsoft Windows
Embedded Compact 7
Display
Type
15” Standard TFT LCD
Resolution
1024(W) x 768(H) pixels XGA
Color
65,536
Brightness
310 cd/m2
Backlight
LED
Touchscreen
Touch Panel
Type
Projected Capacitive
Multi-touch
Two-point
Communications
Ethernet Port
2x 10/100Base-T (RJ-45)
Serial Port
1x RS-232 UART port
1x RS-232/485 port
(2x 5-pin connector)
USB, Host
2x USB 2.0 (Type-A
Maximum power (5 V at 0.5 A)
USB, Device
1x USB 2.0 (mini Type-B)
Storage
1x SD/SDHC card slot
Audio
1x Line Out (Stereo)
(3.5 mm jack)
Noise Immunity
Noise Voltage
1500 V p-p
Pulse Duration
1 μs
Rise Time
1 ns
Input power
Rated Voltage
12/24 V dc ±20%
(3-pin connector)
Power
Consumption 30 W maximum, 2.5 / 1.25 A
Frame Ground
(FG)
Frame GND connected
internally to Signal GND
Dimensions (L×W×D)
399 × 323 × 70 mm
(15.71 × 12.72 × 2.76 in)
Weight
4.46 kg (9.83 lbs)
Mounting
Options
Panel Cutout
Dimensions
379 × 305 mm
(14.92 × 12.01 in)
VESA Mount
100 x 100 mm (3.94 x 3.94 in)

GFK-2893K QuickPanel+ Quick Start Guide 13
2.2Environmental Specifications
Note: Install the QuickPanel+in a well-ventilated
location that is not exposed to dust,
corrosive gases or liquids, rain, strong ultra-
violet light or direct sunlight, and meets the
following specifications.
Item
Specification (All Display Units)
Cooling Natural convection
Ambient Operating
Temperature 0 to +55°C (32 to 131 °F)
Ambient Storage
Temperature -10 to +60°C (14 to 140 °F)
Ambient Humidity
(Operating/Storage) 85% RH Non-condensing, wet-bulb
temperature: 30°C (86 °F) or less
Environment Pollution Degree 2, Indoor use only
Vibration
Resistance
5 to 9 Hz single-amplitude 3.5 mm
9 to 150 Hz constant-accelerated
velocity 9.8 m/s2; X, Y, Z directions 10
time (100 minutes)
(Compliance 3502, IEC61131-2 JIS B)
Altitude 800~1114 hPa, altitude up to 2000 m
(6561.68 ft)
RoHS Compliant with EU RoHS Directive
2011/65/EU
Enclosure Rating
IC755CxS06RDx: UL Type 4X;
IP65 in panel mount only
IC755CxW07CDx: UL Type 4X;
IP65 in panel mount only
IC755CxS10CDx: UL Type 4X;
IP65 in panel mount only
IC755CxS12CDx: UL Type 4X;
IP65 in panel mount only
IC755CxS15CDx: UL Type 4X;
IP65 in panel mount only
Note: For additional product standards and agency
approvals, refer the section Product
Certifications and Installation Guidelines.

14 QuickPanel+Quick Start Guide GFK-2893K
3. Initial Startup
Note: For installation requirements, complete
installation procedures, and operating
information, refer to the QuickPanel+
Operator Interface User Manual (GFK-2847).
You will need the following:
A Safety Extra Low Voltage (SELV) and
Limited Energy Circuit or SELV and Class 2
dc power supply.
The power terminal block is supplied with the
product. For voltage and requirements, refer
to the Input Power specifications in the table,
General Specifications.
The mating power terminal block supports
stranded 30 to 14 AWG (0.05 to 2.00 mm2)
wires. The user calculates proper gauge
wiring for current carrying capacity and loss
according to local regulations.
At a minimum, the cable must be rated for
75°C (167 °F) or more.
Warning
ELECTRICAL SHOCK HAZARD -
To avoid personal injury or
damage to equipment, ensure
that the dc supply is
disconnected from power and
the leads are not energized
before attaching them to the
unit's power supply plug.
Warning
If this equipment is used in a
manner not specified by the
manufacturer, the protection
provided by the equipment may
be impaired.

GFK-2893K QuickPanel+ Quick Start Guide 15
3.1 QuickPanel+ Battery Installation
Caution
1) Installing the battery should
only be performed by trained
personnel and in a non-
hazardous location.
2) If the QuickPanel+is VESA
mounted, detach from the
VESA arm when replacing the
battery. Refer to the section,
Mounting on a VESA arm.
3) The battery should only be
installed when the unit is
powered off.
4) Care should be taken to
protect and insert the battery
with correct polarity.
5) Do not use any metallic item
to remove the battery (such
as screwdrivers, knives,
pliers, and so forth).
6) Be careful to not drop the
battery or any associated
screws into the unit.
7) Be careful of edges on
internal sides of the
enclosure and frame.

16 QuickPanel+Quick Start Guide GFK-2893K
To install the battery
1. Remove the battery cover by pressing down
while sliding outward.
IC755CxS06RDx Battery Cover Removal
2. Connect the battery harness connector to
the header, noting keyed orientation.
IC755CxS06RDx Battery Harness Connection
3. Verify that positive (red) is down and
negative (black) is up.
4. Wrap the harness connector around to
match the following figure. Do not let the
harness connector go above the tab.
Harness Connector Orientation
5. Slide the battery cover into place, taking care
not to pinch the harness connector.

GFK-2893K QuickPanel+ Quick Start Guide 17
3.2 Battery Replacement
Warning
Batteries may present a risk of
fire, explosion, or chemical burn
if mistreated. Do not crush,
disassemble, short-circuit, or
dispose of in fire.
Warning
Use of batteries not specified for
use with the QuickPanel+
product may present a risk of
fire or explosion.
Caution
Replace the battery for the
IC755CxS06RDx only with GE
battery part number
IC755ACCBATT.
Caution
Replace the battery for the
IC755CxW07CDx only with GE
battery part number
IC755ACCBATT.
Caution
Replace the battery for the
IC755CxSxxCDx only with GE
battery part number
IC755ACCBATTNL.

18 QuickPanel+Quick Start Guide GFK-2893K
3.3 Connecting Input Power
To connect input power
1. Verify that the power cable is not energized.
2. Loosen the
screw clamps
on the mating
power
connector.
3. Strip the
insulation from
the power
cables.
4. Secure the power cable to the mating
connector, noting polarity, and tighten the
screw clamps. The torque for the attaching
screws is 0.3 Nm (2.26 in-lb).
5. Apply dc power to the unit. During normal
startup and operation, the QuickPanel+
status LED indicator displays as follows:
•Solid amber while the QuickPanel+unit
is starting up
•Solid green during normal operation
6. Once power is applied, the QuickPanel+
begins initializing. The first thing to display is
the splash screen.
To skip running any programs included in the
StartUp folder, tap Don’t run StartUp
programs. The Microsoft Windows
Embedded Compact 7 operating system
starts automatically.
M2.5
Mounting clamps M2
Screw clamps
Power Connector
FG GND +24 V dc

GFK-2893K QuickPanel+ Quick Start Guide 19
3.4 LED Indicators
3.4.1 Operation Status LEDs
The QuickPanel+has one tri-color LED that provides
visual operation status indication for the
IC755CxS06RDx, IC755CxW07CDx, and
IC755CxSxxCDx units.
LED State QuickPanel+State
Amber, solid Operating system starting
Green, solid Normal operating state
Green, blinking Backlight off
Red, blinking Backlight failure
Off Power not applied to unit
3.4.2 Ethernet Port Operation LEDs
The Ethernet port has two LED indicators: Speed and
Link Activity.
Speed Link Activity
LED LED State Operating
State
Speed Yellow, on 10/100
Link Activity Green, on Link status

20 QuickPanel+Quick Start Guide GFK-2893K
4. Mounting and Installation
4.1 Protective Sheet Installation
To install the protective sheet
1. Remove the protective film from the
QuickPanel+display screen.
2. Wipe the display unit of any dust or
fingerprints.
3. Peel back a corner of the clear side of the
protective sheet.
4. Begin applying the corner to the display
screen.
5. Slowly apply the rest of the protective sheet,
smoothing out as you go.
6. Peel the green curing film from the protective
sheet.