GE L60 User manual

g
GE Industrial Systems
831775A1.CDR
L60 Line Phase Comparison Relay
UR Series Instruction Manual
L60 Revision: 5.2x
Manual P/N: 1601-0082-P2 (GEK-113322A)
Copyright © 2007 GE Multilin
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
Title Page
ISO9001:2000
G
E
M
U
L
T
I
L
I
N
R
E
G
I
S
T
E
R
E
D
GE Multilin's Quality Management
System is registered to
ISO9001:2000
QMI # 005094
UL # A3775
*1601-0082-P2*

g
GE Industrial Systems
ADDENDUM
This Addendum contains information that relates to the L60 Line Phase Comparison Relay relay, version 5.2x. This
addendum lists a number of information items that appear in the instruction manual GEK-113322A (revision P2) but are
not included in the current L60 operations.
The following functions/items are not yet available with the current version of the L60 relay:
•N/A
Version 4.0x and higher releases of the L60 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, and 9R.
• The new CT/VT modules are specified with the following order codes: 8F, 8H, 8L, 8N 8P.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R), and the old CT/
VT modules can only be used with the old CPU modules (9A, 9C, 9D). To prevent any hardware mismatches, the new
CPU and CT/VT modules have blue labels and a warning sticker stating “Attn.: Ensure CPU and DSP module label
MODULE OLD NEW DESCRIPTION
CPU 9A 9E RS485 and RS485 (Modbus RTU, DNP)
9C 9G RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
9D 9H RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
-- 9J RS485 and multi-mode ST 100Base-FX
-- 9K RS485 and multi-mode ST redundant 100Base-FX
-- 9L RS485 and single mode SC 100Base-FX
-- 9M RS485 and single mode SC redundant 100Base-FX
-- 9N RS485 and 10/100Base-T
-- 9P RS485 and single mode ST 100Base-FX
-- 9R RS485 and single mode ST redundant 100Base-FX
CT/VT 8A 8F Standard 4CT/4VT
8C 8H Standard 8CT
-- 8L Standard 4CT/4VT with enhanced diagnostics
-- 8N Standard 8CT with enhanced diagnostics
-- 8P Special 4CT module with communications channel for L60
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
Addendum

GE Multilin L60 Line Phase Comparison Relay v
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS ........................................................................... 1-1
1.1.2 INSPECTION CHECKLIST ................................................................................ 1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR ........................................................................... 1-2
1.2.2 HARDWARE ARCHITECTURE ......................................................................... 1-3
1.2.3 SOFTWARE ARCHITECTURE.......................................................................... 1-4
1.2.4 IMPORTANT CONCEPTS ................................................................................. 1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS ........................................................................................ 1-5
1.3.2 INSTALLATION.................................................................................................. 1-5
1.3.3 CONFIGURING THE L60 FOR SOFTWARE ACCESS..................................... 1-6
1.3.4 USING THE QUICK CONNECT FEATURE....................................................... 1-9
1.3.5 CONNECTING TO THE L60 RELAY ............................................................... 1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING............................................................................... 1-16
1.4.2 COMMUNICATIONS........................................................................................ 1-16
1.4.3 FACEPLATE DISPLAY .................................................................................... 1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD..................................................................................... 1-17
1.5.2 MENU NAVIGATION ....................................................................................... 1-17
1.5.3 MENU HIERARCHY ........................................................................................ 1-17
1.5.4 RELAY ACTIVATION....................................................................................... 1-17
1.5.5 BATTERY TAB................................................................................................. 1-18
1.5.6 RELAY PASSWORDS ..................................................................................... 1-18
1.5.7 FLEXLOGIC™ CUSTOMIZATION................................................................... 1-18
1.5.8 COMMISSIONING ........................................................................................... 1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................ 2-1
2.1.2 ORDERING........................................................................................................ 2-4
2.1.3 REPLACEMENT MODULES ............................................................................. 2-7
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ............................................................................... 2-9
2.2.2 USER-PROGRAMMABLE ELEMENTS ........................................................... 2-13
2.2.3 MONITORING.................................................................................................. 2-14
2.2.4 METERING ...................................................................................................... 2-14
2.2.5 INPUTS ............................................................................................................ 2-15
2.2.6 POWER SUPPLY ............................................................................................ 2-16
2.2.7 OUTPUTS ........................................................................................................ 2-16
2.2.8 COMMUNICATIONS........................................................................................ 2-17
2.2.9 INTER-RELAY COMMUNICATIONS............................................................... 2-18
2.2.10 ENVIRONMENTAL .......................................................................................... 2-18
2.2.11 TYPE TESTS ................................................................................................... 2-19
2.2.12 PRODUCTION TESTS .................................................................................... 2-19
2.2.13 APPROVALS ................................................................................................... 2-19
2.2.14 MAINTENANCE ............................................................................................... 2-19
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ............................................................................................... 3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION ..................................................... 3-4
3.1.3 REAR TERMINAL LAYOUT............................................................................... 3-5
3.2 WIRING
3.2.1 TYPICAL WIRING.............................................................................................. 3-6
3.2.2 DIELECTRIC STRENGTH ................................................................................. 3-7
3.2.3 CONTROL POWER ........................................................................................... 3-7
3.2.4 CT/VT MODULES .............................................................................................. 3-8
3.2.5 CONTACT INPUTS/OUTPUTS ....................................................................... 3-10
Table of Contents

vi L60 Line Phase Comparison Relay GE Multilin
TABLE OF CONTENTS
3.2.6 TRANSDUCER INPUTS/OUTPUTS.................................................................3-18
3.2.7 RS232 FACEPLATE PORT..............................................................................3-19
3.2.8 CPU COMMUNICATION PORTS.....................................................................3-19
3.2.9 IRIG-B...............................................................................................................3-22
3.2.10 L60 CHANNEL COMMUNICATIONS ...............................................................3-23
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-24
3.3.2 FIBER: LED AND ELED TRANSMITTERS ......................................................3-26
3.3.3 FIBER-LASER TRANSMITTERS .....................................................................3-26
3.3.4 G.703 INTERFACE...........................................................................................3-27
3.3.5 RS422 INTERFACE .........................................................................................3-30
3.3.6 RS422 AND FIBER INTERFACE .....................................................................3-32
3.3.7 G.703 AND FIBER INTERFACE ......................................................................3-32
3.3.8 IEEE C37.94 INTERFACE................................................................................3-33
3.3.9 C37.94SM INTERFACE ...................................................................................3-35
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST ....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW ................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-3
4.2 FACEPLATE INTERFACE
4.2.1 FACEPLATE .......................................................................................................4-4
4.2.2 LED INDICATORS..............................................................................................4-5
4.2.3 DISPLAY.............................................................................................................4-8
4.2.4 KEYPAD .............................................................................................................4-8
4.2.5 BREAKER CONTROL ........................................................................................4-8
4.2.6 MENUS...............................................................................................................4-9
4.2.7 CHANGING SETTINGS ...................................................................................4-11
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU ....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 PASSWORD SECURITY....................................................................................5-8
5.2.2 DISPLAY PROPERTIES ....................................................................................5-9
5.2.3 CLEAR RELAY RECORDS ..............................................................................5-11
5.2.4 COMMUNICATIONS ........................................................................................5-12
5.2.5 MODBUS USER MAP ......................................................................................5-27
5.2.6 REAL TIME CLOCK .........................................................................................5-28
5.2.7 FAULT REPORTS ............................................................................................5-29
5.2.8 OSCILLOGRAPHY ...........................................................................................5-31
5.2.9 DATA LOGGER................................................................................................5-33
5.2.10 USER-PROGRAMMABLE LEDS .....................................................................5-34
5.2.11 USER-PROGRAMMABLE SELF TESTS .........................................................5-37
5.2.12 CONTROL PUSHBUTTONS ............................................................................5-38
5.2.13 USER-PROGRAMMABLE PUSHBUTTONS....................................................5-39
5.2.14 FLEX STATE PARAMETERS ..........................................................................5-43
5.2.15 USER-DEFINABLE DISPLAYS ........................................................................5-43
5.2.16 DIRECT INPUTS/OUTPUTS ............................................................................5-45
5.2.17 TELEPROTECTION .........................................................................................5-50
5.2.18 INSTALLATION ................................................................................................5-51
5.3 SYSTEM SETUP
5.3.1 AC INPUTS.......................................................................................................5-52
5.3.2 POWER SYSTEM ............................................................................................5-54
5.3.3 SIGNAL SOURCES..........................................................................................5-55
5.3.4 BREAKERS ......................................................................................................5-57
5.3.5 FLEXCURVES™ ..............................................................................................5-60

GE Multilin L60 Line Phase Comparison Relay vii
TABLE OF CONTENTS
5.4 FLEXLOGIC™
5.4.1 INTRODUCTION TO FLEXLOGIC™............................................................... 5-67
5.4.2 FLEXLOGIC™ RULES .................................................................................... 5-77
5.4.3 FLEXLOGIC™ EVALUATION.......................................................................... 5-77
5.4.4 FLEXLOGIC™ EXAMPLE ............................................................................... 5-77
5.4.5 FLEXLOGIC™ EQUATION EDITOR ............................................................... 5-82
5.4.6 FLEXLOGIC™ TIMERS................................................................................... 5-82
5.4.7 FLEXELEMENTS™ ......................................................................................... 5-83
5.4.8 NON-VOLATILE LATCHES ............................................................................. 5-87
5.5 GROUPED ELEMENTS
5.5.1 OVERVIEW...................................................................................................... 5-88
5.5.2 SETTING GROUP ........................................................................................... 5-88
5.5.3 PHASE COMPARISON ELEMENTS ............................................................... 5-89
5.5.4 LINE PICKUP................................................................................................. 5-103
5.5.5 DISTANCE ..................................................................................................... 5-105
5.5.6 POWER SWING DETECT ............................................................................. 5-123
5.5.7 LOAD ENCROACHMENT.............................................................................. 5-131
5.5.8 PHASE CURRENT ........................................................................................ 5-133
5.5.9 NEUTRAL CURRENT.................................................................................... 5-143
5.5.10 WATTMETRIC GROUND FAULT.................................................................. 5-151
5.5.11 GROUND CURRENT..................................................................................... 5-154
5.5.12 NEGATIVE SEQUENCE CURRENT ............................................................. 5-155
5.5.13 BREAKER FAILURE...................................................................................... 5-162
5.5.14 VOLTAGE ELEMENTS.................................................................................. 5-171
5.6 CONTROL ELEMENTS
5.6.1 OVERVIEW.................................................................................................... 5-179
5.6.2 SETTING GROUPS ....................................................................................... 5-179
5.6.3 SELECTOR SWITCH..................................................................................... 5-180
5.6.4 TRIP OUTPUT ............................................................................................... 5-186
5.6.5 SYNCHROCHECK......................................................................................... 5-190
5.6.6 DIGITAL ELEMENTS..................................................................................... 5-194
5.6.7 DIGITAL COUNTERS .................................................................................... 5-197
5.6.8 MONITORING ELEMENTS ........................................................................... 5-199
5.6.9 PILOT SCHEMES .......................................................................................... 5-210
5.6.10 AUTORECLOSE ............................................................................................ 5-213
5.7 INPUTS/OUTPUTS
5.7.1 CONTACT INPUTS........................................................................................ 5-225
5.7.2 VIRTUAL INPUTS.......................................................................................... 5-227
5.7.3 CONTACT OUTPUTS.................................................................................... 5-228
5.7.4 VIRTUAL OUTPUTS...................................................................................... 5-230
5.7.5 REMOTE DEVICES ....................................................................................... 5-231
5.7.6 REMOTE INPUTS.......................................................................................... 5-232
5.7.7 REMOTE OUTPUTS...................................................................................... 5-233
5.7.8 RESETTING................................................................................................... 5-234
5.7.9 DIRECT INPUTS/OUTPUTS ......................................................................... 5-234
5.7.10 TELEPROTECTION INPUTS/OUTPUTS ...................................................... 5-238
5.8 TRANSDUCER INPUTS/OUTPUTS
5.8.1 DCMA INPUTS .............................................................................................. 5-240
5.8.2 RTD INPUTS.................................................................................................. 5-241
5.8.3 DCMA OUTPUTS .......................................................................................... 5-241
5.9 TESTING
5.9.1 TEST MODE .................................................................................................. 5-245
5.9.2 FORCE CONTACT INPUTS .......................................................................... 5-245
5.9.3 FORCE CONTACT OUTPUTS ...................................................................... 5-246
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU ........................................................................ 6-1
6.2 STATUS
6.2.1 CONTACT INPUTS............................................................................................ 6-3
6.2.2 VIRTUAL INPUTS.............................................................................................. 6-3
6.2.3 REMOTE INPUTS.............................................................................................. 6-3

viii L60 Line Phase Comparison Relay GE Multilin
TABLE OF CONTENTS
6.2.4 TELEPROTECTION INPUTS .............................................................................6-4
6.2.5 CONTACT OUTPUTS ........................................................................................6-4
6.2.6 VIRTUAL OUTPUTS ..........................................................................................6-4
6.2.7 AUTORECLOSE.................................................................................................6-5
6.2.8 REMOTE DEVICES............................................................................................6-5
6.2.9 DIGITAL COUNTERS.........................................................................................6-6
6.2.10 SELECTOR SWITCHES ....................................................................................6-6
6.2.11 FLEX STATES....................................................................................................6-6
6.2.12 ETHERNET ........................................................................................................6-6
6.2.13 DIRECT INPUTS ................................................................................................6-7
6.2.14 DIRECT DEVICES STATUS ..............................................................................6-7
6.2.15 TELEPROTECTION CHANNEL TESTS.............................................................6-8
6.3 METERING
6.3.1 METERING CONVENTIONS .............................................................................6-9
6.3.2 SOURCES ........................................................................................................6-12
6.3.3 SYNCHROCHECK ...........................................................................................6-15
6.3.4 TRACKING FREQUENCY................................................................................6-15
6.3.5 FLEXELEMENTS™ ..........................................................................................6-15
6.3.6 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-16
6.3.7 WATTMETRIC GROUND FAULT.....................................................................6-16
6.3.8 TRANSDUCER INPUTS/OUTPUTS.................................................................6-17
6.4 RECORDS
6.4.1 FAULT REPORTS ............................................................................................6-18
6.4.2 EVENT RECORDS...........................................................................................6-21
6.4.3 OSCILLOGRAPHY ...........................................................................................6-21
6.4.4 DATA LOGGER................................................................................................6-21
6.4.5 BREAKER MAINTENANCE .............................................................................6-22
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-23
6.5.2 FIRMWARE REVISIONS..................................................................................6-23
7. COMMANDS AND
TARGETS
7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 VIRTUAL INPUTS ..............................................................................................7-1
7.1.3 CLEAR RECORDS.............................................................................................7-1
7.1.4 SET DATE AND TIME ........................................................................................7-2
7.1.5 RELAY MAINTENANCE.....................................................................................7-2
7.2 TARGETS
7.2.1 TARGETS MENU ...............................................................................................7-3
7.2.2 TARGET MESSAGES ........................................................................................7-3
7.2.3 RELAY SELF-TESTS .........................................................................................7-3
8. THEORY OF OPERATION 8.1 OVERVIEW
8.1.1 INTRODUCTION ................................................................................................8-1
8.1.2 FUNDAMENTAL PRINCIPLE OF PHASE COMPARISON ................................8-1
8.1.3 VARIATIONS IN PHASE COMPARISON SCHEMES........................................8-6
8.1.4 PHASE COMPARISON EXCITATION................................................................8-6
8.1.5 BLOCKING VS. TRIPPING SCHEMES............................................................8-10
8.1.6 SINGLE VS. DUAL PHASE COMPARISON.....................................................8-18
8.1.7 REFINEMENTS TO BASIC SCHEMES............................................................8-20
8.1.8 MULTI-TERMINAL LINES ................................................................................8-23
8.1.9 CHARGING CURRENT COMPENSATION......................................................8-23
8.1.10 L60 SIGNAL PROCESSING.............................................................................8-25
8.2 SINGLE-POLE TRIPPING
8.2.1 OVERVIEW ......................................................................................................8-33
8.2.2 PHASE SELECTION ........................................................................................8-36

GE Multilin L60 Line Phase Comparison Relay ix
TABLE OF CONTENTS
9. APPLICATION OF
SETTINGS
9.1 PHASE COMPARISON ELEMENT 87PC
9.1.1 DESCRIPTION................................................................................................... 9-1
9.1.2 USE OF SETTINGS........................................................................................... 9-1
9.1.3 SETTINGS EXAMPLE ....................................................................................... 9-3
9.2 DISTANCE BACKUP/SUPERVISION
9.2.1 DESCRIPTION................................................................................................... 9-4
9.2.2 LINES WITH TAPPED TRANSFORMERS ........................................................ 9-5
9.2.3 TRANSFORMER LOAD CURRENTS................................................................ 9-5
9.2.4 LV-SIDE FAULTS .............................................................................................. 9-5
9.2.5 TRANSFORMER INRUSH CURRENT .............................................................. 9-5
9.2.6 TRACTIONAL LOAD.......................................................................................... 9-6
9.2.7 SENSITIVITY ISSUES ....................................................................................... 9-7
9.2.8 SINGLE-POLE TRIPPING APPLICATIONS ...................................................... 9-8
9.2.9 SECURITY ON WEAK OR NOISY PLC CHANNELS........................................ 9-9
9.2.10 PHASE DISTANCE.......................................................................................... 9-10
9.2.11 GROUND DISTANCE ...................................................................................... 9-10
9.3 POTT SIGNALING SCHEME
9.3.1 DESCRIPTION................................................................................................. 9-11
9.4 SERIES COMPENSATED LINES
9.4.1 DISTANCE SETTINGS .................................................................................... 9-12
9.5 UNDERSTANDING L60 OSCILLOGRAPHY
9.5.1 OVERVIEW...................................................................................................... 9-13
9.5.2 TWO BREAKER CONFIGURATION ............................................................... 9-14
A. FLEXANALOG
PARAMETERS
A.1 PARAMETER LIST
B. MODBUS
COMMUNICATIONS
B.1 OVERVIEW
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1
B.1.4 CRC-16 ALGORITHM........................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES ...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H) ...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H) .......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-5
B.2.6 EXCEPTION RESPONSES ...............................................................................B-5
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS ........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION ...............................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP .................................................................................B-8
B.4.2 DATA FORMATS .............................................................................................B-58
C. IEC 61850
COMMUNICATIONS
C.1 OVERVIEW
C.1.1 INTRODUCTION................................................................................................C-1
C.1.2 COMMUNICATION PROFILES .........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW........................................................................................................C-2
C.2.2 GGIO1: DIGITAL STATUS VALUES .................................................................C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES ..............................................................C-2

x L60 Line Phase Comparison Relay GE Multilin
TABLE OF CONTENTS
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 MMXU: ANALOG MEASURED VALUES .......................................................... C-2
C.2.6 PROTECTION AND OTHER LOGICAL NODES...............................................C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................ C-5
C.3.2 FILE TRANSFER............................................................................................... C-5
C.3.3 TIMESTAMPS AND SCANNING ....................................................................... C-5
C.3.4 LOGICAL DEVICE NAME ................................................................................. C-5
C.3.5 LOCATION ........................................................................................................ C-5
C.3.6 LOGICAL NODE NAME PREFIXES.................................................................. C-6
C.3.7 CONNECTION TIMING ..................................................................................... C-6
C.3.8 NON-IEC 61850 DATA ...................................................................................... C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES..................................................... C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW ....................................................................................................... C-7
C.4.2 GSSE CONFIGURATION.................................................................................. C-7
C.4.3 FIXED GOOSE .................................................................................................. C-7
C.4.4 CONFIGURABLE GOOSE ................................................................................ C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE ..........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS.............................................................. C-9
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW ..................................................................................................... C-10
C.5.2 CONFIGURING IEC 61850 SETTINGS ..........................................................C-11
C.5.3 ABOUT ICD FILES .......................................................................................... C-12
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP.............................. C-16
C.5.5 ABOUT SCD FILES......................................................................................... C-16
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP........................... C-19
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................ C-21
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................ C-21
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT......................................... C-22
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE ............................................................................... C-25
D. IEC 60870-5-104
COMMUNICATIONS
D.1 PROTOCOL
D.1.1 INTEROPERABILITY DOCUMENT................................................................... D-1
D.1.2 POINT LIST ....................................................................................................... D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT
E.1.1 DNP V3.00 DEVICE PROFILE .......................................................................... E-1
E.1.2 IMPLEMENTATION TABLE .............................................................................. E-4
E.2 DNP POINT LISTS
E.2.1 BINARY INPUT POINTS ................................................................................... E-8
E.2.2 BINARY AND CONTROL RELAY OUTPUT...................................................... E-9
E.2.3 COUNTERS..................................................................................................... E-10
E.2.4 ANALOG INPUTS............................................................................................ E-11
F. MISCELLANEOUS F.1 CHANGE NOTES
F.1.1 REVISION HISTORY......................................................................................... F-1
F.1.2 CHANGES TO THE L60 MANUAL.................................................................... F-1
F.2 ABBREVIATIONS
F.2.1 STANDARD ABBREVIATIONS ......................................................................... F-3
F.3 WARRANTY
F.3.1 GE MULTILIN WARRANTY............................................................................... F-5