GE T60 User manual

828743A2.CDR
T60 Transformer Protection System
UR Series Instruction Manual
T60 Revision: 5.7x
Manual P/N: 1601-0090-U3 (GEK-113531B)
Copyright © 2010 GE Multilin
GE Multilin
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.GEmultilin.com
g
GE Industrial Systems
Title Page
IISO9001:2000
G
E
M
U
L
T
I
L
I
N
R
E
G
I
S
T
E
R
E
D
GE Multilin's Quality Management
System is registered to
ISO9001:2000
QMI # 005094
UL # A3775
*1601-0090-U3*
LISTED
52TL
IND.CONT. EQ.
E83849

g
GE Industrial Systems
ADDENDUM
This addendum contains information that relates to the T60 Transformer Protection System, version 5.7x. This adden-
dum lists a number of information items that appear in the instruction manual GEK-113531B (revision U3) but are not
included in the current T60 operations.
The following functions and items are not yet available with the current version of the T60 relay:
• Signal sources SRC 5 and SRC 6.
Version 4.0x and higher releases of the T60 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S.
• The new CT/VT modules are specified with the following order codes: 8F, 8G, 8H, 8J 8L, 8M, 8N, 8R.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S), and
the old CT/VT modules can only be used with the old CPU modules (9A, 9C, 9D). To prevent any hardware mis-
matches, the new CPU and CT/VT modules have blue labels and a warning sticker stating “Attn.: Ensure CPU and
DSP module label colors are the same!”. In the event that there is a mismatch between the CPU and CT/VT module,
the relay will not function and a DSP ERROR or HARDWARE MISMATCH error will be displayed.
All other input/output modules are compatible with the new hardware.
With respect to the firmware, firmware versions 4.0x and higher are only compatible with the new CPU and CT/VT mod-
MODULE OLD NEW DESCRIPTION
CPU 9A 9E RS485 and RS485 (Modbus RTU, DNP)
9C 9G RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
9D 9H RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
--- 9J RS485 and multi-mode ST 100Base-FX
--- 9K RS485 and multi-mode ST redundant 100Base-FX
--- 9L RS485 and single mode SC 100Base-FX
--- 9M RS485 and single mode SC redundant 100Base-FX
--- 9N RS485 and 10/100Base-T
--- 9P RS485 and single mode ST 100Base-FX
--- 9R RS485 and single mode ST redundant 100Base-FX
--- 9S RS485 and six-port managed Ethernet switch
CT/VT 8A 8F Standard 4CT/4VT
8B 8G Sensitive ground 4CT/4VT
8C 8H Standard 8CT
8D 8J Sensitive ground 8CT
-- 8L Standard 4CT/4VT with enhanced diagnostics
-- 8M Sensitive ground 4CT/4VT with enhanced diagnostics
-- 8N Standard 8CT with enhanced diagnostics
-- 8R Sensitive ground 8CT with enhanced diagnostics
Addendum

GE Multilin T60 Transformer Protection System v
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS........................................................................... 1-1
1.1.2 INSPECTION CHECKLIST................................................................................1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR...........................................................................1-2
1.2.2 HARDWARE ARCHITECTURE......................................................................... 1-3
1.2.3 SOFTWARE ARCHITECTURE..........................................................................1-4
1.2.4 IMPORTANT CONCEPTS.................................................................................1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS........................................................................................1-5
1.3.2 INSTALLATION..................................................................................................1-5
1.3.3 CONFIGURING THE T60 FOR SOFTWARE ACCESS .................................... 1-6
1.3.4 USING THE QUICK CONNECT FEATURE.......................................................1-9
1.3.5 CONNECTING TO THE T60 RELAY...............................................................1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING...............................................................................1-16
1.4.2 COMMUNICATIONS........................................................................................1-16
1.4.3 FACEPLATE DISPLAY....................................................................................1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD.....................................................................................1-17
1.5.2 MENU NAVIGATION .......................................................................................1-17
1.5.3 MENU HIERARCHY ........................................................................................1-17
1.5.4 RELAY ACTIVATION.......................................................................................1-17
1.5.5 RELAY PASSWORDS.....................................................................................1-18
1.5.6 FLEXLOGIC™ CUSTOMIZATION...................................................................1-18
1.5.7 COMMISSIONING ........................................................................................... 1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................ 2-1
2.1.2 ORDERING........................................................................................................2-3
2.1.3 REPLACEMENT MODULES .............................................................................2-7
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ............................................................................. 2-10
2.2.2 USER-PROGRAMMABLE ELEMENTS...........................................................2-13
2.2.3 MONITORING..................................................................................................2-14
2.2.4 METERING......................................................................................................2-15
2.2.5 INPUTS............................................................................................................2-15
2.2.6 POWER SUPPLY ............................................................................................2-16
2.2.7 OUTPUTS........................................................................................................2-17
2.2.8 COMMUNICATIONS........................................................................................2-18
2.2.9 INTER-RELAY COMMUNICATIONS...............................................................2-19
2.2.10 ENVIRONMENTAL ..........................................................................................2-20
2.2.11 TYPE TESTS ...................................................................................................2-20
2.2.12 PRODUCTION TESTS ....................................................................................2-20
2.2.13 APPROVALS ................................................................................................... 2-21
2.2.14 MAINTENANCE...............................................................................................2-21
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ...............................................................................................3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION.....................................................3-6
3.1.3 REAR TERMINAL LAYOUT............................................................................... 3-8
3.2 WIRING
3.2.1 TYPICAL WIRING............................................................................................3-10
3.2.2 DIELECTRIC STRENGTH...............................................................................3-11
3.2.3 CONTROL POWER.........................................................................................3-11
3.2.4 CT/VT MODULES............................................................................................3-12
3.2.5 PROCESS BUS MODULES ............................................................................3-14
3.2.6 CONTACT INPUTS AND OUTPUTS...............................................................3-14
Table of Contents

vi T60 Transformer Protection System GE Multilin
TABLE OF CONTENTS
3.2.7 TRANSDUCER INPUTS/OUTPUTS.................................................................3-22
3.2.8 RS232 FACEPLATE PORT..............................................................................3-23
3.2.9 CPU COMMUNICATION PORTS.....................................................................3-23
3.2.10 IRIG-B...............................................................................................................3-27
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-28
3.3.2 FIBER: LED AND ELED TRANSMITTERS ......................................................3-30
3.3.3 FIBER-LASER TRANSMITTERS .....................................................................3-30
3.3.4 G.703 INTERFACE...........................................................................................3-31
3.3.5 RS422 INTERFACE .........................................................................................3-34
3.3.6 RS422 AND FIBER INTERFACE .....................................................................3-36
3.3.7 G.703 AND FIBER INTERFACE ......................................................................3-36
3.3.8 IEEE C37.94 INTERFACE................................................................................3-37
3.3.9 C37.94SM INTERFACE ...................................................................................3-39
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.1 OVERVIEW ......................................................................................................3-41
3.4.2 MANAGED ETHERNET SWITCH MODULE HARDWARE..............................3-41
3.4.3 MANAGED SWITCH LED INDICATORS .........................................................3-42
3.4.4 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE.................3-42
3.4.5 UPLOADING T60 SWITCH MODULE FIRMWARE .........................................3-45
3.4.6 ETHERNET SWITCH SELF-TEST ERRORS...................................................3-47
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-3
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
4.2.1 SETTINGS TEMPLATES ...................................................................................4-4
4.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS................................4-8
4.2.3 SETTINGS FILE TRACEABILITY.....................................................................4-10
4.3 FACEPLATE INTERFACE
4.3.1 FACEPLATE.....................................................................................................4-13
4.3.2 LED INDICATORS............................................................................................4-14
4.3.3 CUSTOM LABELING OF LEDS .......................................................................4-17
4.3.4 DISPLAY...........................................................................................................4-23
4.3.5 KEYPAD ...........................................................................................................4-23
4.3.6 BREAKER CONTROL......................................................................................4-23
4.3.7 MENUS.............................................................................................................4-24
4.3.8 CHANGING SETTINGS ...................................................................................4-26
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU ....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 SECURITY..........................................................................................................5-8
5.2.2 DISPLAY PROPERTIES ..................................................................................5-12
5.2.3 CLEAR RELAY RECORDS..............................................................................5-14
5.2.4 COMMUNICATIONS ........................................................................................5-15
5.2.5 MODBUS USER MAP......................................................................................5-36
5.2.6 REAL TIME CLOCK .........................................................................................5-37
5.2.7 USER-PROGRAMMABLE FAULT REPORT....................................................5-38
5.2.8 OSCILLOGRAPHY...........................................................................................5-39
5.2.9 DATA LOGGER................................................................................................5-41
5.2.10 DEMAND ..........................................................................................................5-43
5.2.11 USER-PROGRAMMABLE LEDS .....................................................................5-44
5.2.12 USER-PROGRAMMABLE SELF TESTS .........................................................5-47
5.2.13 CONTROL PUSHBUTTONS............................................................................5-48

GE Multilin T60 Transformer Protection System vii
TABLE OF CONTENTS
5.2.14 USER-PROGRAMMABLE PUSHBUTTONS...................................................5-49
5.2.15 FLEX STATE PARAMETERS.......................................................................... 5-54
5.2.16 USER-DEFINABLE DISPLAYS .......................................................................5-55
5.2.17 DIRECT INPUTS AND OUTPUTS...................................................................5-57
5.2.18 TELEPROTECTION.........................................................................................5-65
5.2.19 INSTALLATION................................................................................................5-66
5.3 REMOTE RESOURCES
5.3.1 REMOTE RESOURCES CONFIGURATION...................................................5-67
5.4 SYSTEM SETUP
5.4.1 AC INPUTS...................................................................................................... 5-68
5.4.2 POWER SYSTEM............................................................................................5-70
5.4.3 SIGNAL SOURCES.........................................................................................5-71
5.4.4 TRANSFORMER ............................................................................................. 5-73
5.4.5 BREAKERS......................................................................................................5-85
5.4.6 DISCONNECT SWITCHES .............................................................................5-89
5.4.7 FLEXCURVES™..............................................................................................5-92
5.5 FLEXLOGIC™
5.5.1 INTRODUCTION TO FLEXLOGIC™...............................................................5-99
5.5.2 FLEXLOGIC™ RULES ..................................................................................5-109
5.5.3 FLEXLOGIC™ EVALUATION........................................................................5-109
5.5.4 FLEXLOGIC™ EXAMPLE .............................................................................5-110
5.5.5 FLEXLOGIC™ EQUATION EDITOR.............................................................5-114
5.5.6 FLEXLOGIC™ TIMERS................................................................................. 5-114
5.5.7 FLEXELEMENTS™ .......................................................................................5-115
5.5.8 NON-VOLATILE LATCHES ........................................................................... 5-119
5.6 GROUPED ELEMENTS
5.6.1 OVERVIEW....................................................................................................5-120
5.6.2 SETTING GROUP .........................................................................................5-120
5.6.3 DISTANCE..................................................................................................... 5-121
5.6.4 POWER SWING DETECT.............................................................................5-139
5.6.5 LOAD ENCROACHMENT.............................................................................. 5-148
5.6.6 TRANSFORMER ELEMENTS....................................................................... 5-150
5.6.7 PHASE CURRENT ........................................................................................5-158
5.6.8 NEUTRAL CURRENT....................................................................................5-170
5.6.9 GROUND CURRENT..................................................................................... 5-178
5.6.10 BREAKER FAILURE......................................................................................5-185
5.6.11 VOLTAGE ELEMENTS..................................................................................5-193
5.7 CONTROL ELEMENTS
5.7.1 OVERVIEW....................................................................................................5-202
5.7.2 TRIP BUS.......................................................................................................5-202
5.7.3 SETTING GROUPS.......................................................................................5-204
5.7.4 SELECTOR SWITCH.....................................................................................5-205
5.7.5 UNDERFREQUENCY....................................................................................5-211
5.7.6 OVERFREQUENCY ......................................................................................5-212
5.7.7 SYNCHROCHECK.........................................................................................5-213
5.7.8 DIGITAL ELEMENTS..................................................................................... 5-217
5.7.9 DIGITAL COUNTERS....................................................................................5-220
5.7.10 MONITORING ELEMENTS ........................................................................... 5-222
5.8 INPUTS/OUTPUTS
5.8.1 CONTACT INPUTS........................................................................................5-226
5.8.2 VIRTUAL INPUTS..........................................................................................5-228
5.8.3 CONTACT OUTPUTS.................................................................................... 5-229
5.8.4 VIRTUAL OUTPUTS...................................................................................... 5-231
5.8.5 REMOTE DEVICES.......................................................................................5-232
5.8.6 REMOTE INPUTS..........................................................................................5-233
5.8.7 REMOTE DOUBLE-POINT STATUS INPUTS .............................................. 5-234
5.8.8 REMOTE OUTPUTS...................................................................................... 5-234
5.8.9 RESETTING...................................................................................................5-235
5.8.10 DIRECT INPUTS AND OUTPUTS.................................................................5-236
5.8.11 TELEPROTECTION INPUTS AND OUTPUTS.............................................. 5-239
5.8.12 IEC 61850 GOOSE ANALOGS...................................................................... 5-241
5.8.13 IEC 61850 GOOSE INTEGERS..................................................................... 5-242
5.9 TRANSDUCER INPUTS AND OUTPUTS
5.9.1 DCMA INPUTS ..............................................................................................5-243

viii T60 Transformer Protection System GE Multilin
TABLE OF CONTENTS
5.9.2 RTD INPUTS..................................................................................................5-244
5.9.3 RRTD INPUTS................................................................................................5-245
5.9.4 DCMA OUTPUTS...........................................................................................5-249
5.10 TESTING
5.10.1 TEST MODE...................................................................................................5-253
5.10.2 FORCE CONTACT INPUTS...........................................................................5-254
5.10.3 FORCE CONTACT OUTPUTS.......................................................................5-255
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU.........................................................................6-1
6.2 STATUS
6.2.1 CONTACT INPUTS ............................................................................................6-3
6.2.2 VIRTUAL INPUTS ..............................................................................................6-3
6.2.3 REMOTE INPUTS ..............................................................................................6-3
6.2.4 TELEPROTECTION INPUTS.............................................................................6-4
6.2.5 CONTACT OUTPUTS........................................................................................6-4
6.2.6 VIRTUAL OUTPUTS ..........................................................................................6-5
6.2.7 REMOTE DEVICES............................................................................................6-5
6.2.8 DIGITAL COUNTERS.........................................................................................6-6
6.2.9 SELECTOR SWITCHES ....................................................................................6-6
6.2.10 FLEX STATES....................................................................................................6-6
6.2.11 ETHERNET ........................................................................................................6-6
6.2.12 DIRECT INPUTS ................................................................................................6-7
6.2.13 DIRECT DEVICES STATUS ..............................................................................6-7
6.2.14 IEC 61850 GOOSE INTEGERS .........................................................................6-8
6.2.15 EGD PROTOCOL STATUS................................................................................6-8
6.2.16 TELEPROTECTION CHANNEL TESTS.............................................................6-9
6.2.17 ETHERNET SWITCH .........................................................................................6-9
6.3 METERING
6.3.1 METERING CONVENTIONS ...........................................................................6-10
6.3.2 TRANSFORMER..............................................................................................6-13
6.3.3 SOURCES........................................................................................................6-14
6.3.4 SYNCHROCHECK ...........................................................................................6-19
6.3.5 TRACKING FREQUENCY................................................................................6-19
6.3.6 FLEXELEMENTS™..........................................................................................6-20
6.3.7 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-20
6.3.8 VOLTS PER HERTZ.........................................................................................6-21
6.3.9 RESTRICTED GROUND FAULT......................................................................6-21
6.3.10 TRANSDUCER INPUTS AND OUTPUTS........................................................6-21
6.4 RECORDS
6.4.1 USER-PROGRAMMABLE FAULT REPORTS.................................................6-22
6.4.2 EVENT RECORDS...........................................................................................6-22
6.4.3 OSCILLOGRAPHY...........................................................................................6-22
6.4.4 DATA LOGGER................................................................................................6-23
6.4.5 BREAKER MAINTENANCE .............................................................................6-23
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-24
6.5.2 FIRMWARE REVISIONS..................................................................................6-24
7. COMMANDS AND
TARGETS 7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 VIRTUAL INPUTS ..............................................................................................7-1
7.1.3 CLEAR RECORDS.............................................................................................7-2
7.1.4 SET DATE AND TIME........................................................................................7-2
7.1.5 RELAY MAINTENANCE.....................................................................................7-3
7.2 TARGETS
7.2.1 TARGETS MENU ...............................................................................................7-4
7.2.2 TARGET MESSAGES........................................................................................7-4
7.2.3 RELAY SELF-TESTS .........................................................................................7-4

GE Multilin T60 Transformer Protection System ix
TABLE OF CONTENTS
8. SECURITY 8.1 PASSWORD SECURITY
8.1.1 OVERVIEW........................................................................................................ 8-1
8.1.2 PASSWORD SECURITY MENU .......................................................................8-2
8.1.3 LOCAL PASSWORDS.......................................................................................8-2
8.1.4 REMOTE PASSWORDS ...................................................................................8-3
8.1.5 ACCESS SUPERVISION...................................................................................8-3
8.1.6 DUAL PERMISSION SECURITY ACCESS.......................................................8-4
8.2 SETTINGS SECURITY
8.2.1 SETTINGS TEMPLATES................................................................................... 8-6
8.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS .............................8-10
8.2.3 SETTINGS FILE TRACEABILITY....................................................................8-12
8.3 ENERVISTA SECURITY MANAGEMENT SYSTEM
8.3.1 OVERVIEW......................................................................................................8-15
8.3.2 ENABLING THE SECURITY MANAGEMENT SYSTEM................................. 8-15
8.3.3 ADDING A NEW USER ...................................................................................8-15
8.3.4 MODIFYING USER PRIVILEGES ...................................................................8-16
9. COMMISSIONING 9.1 DIFFERENTIAL CHARACTERISTIC TEST
9.1.1 DESCRIPTION...................................................................................................9-1
9.2 DIFFERENTIAL CHARACTERISTIC TEST EXAMPLES
9.2.1 INTRODUCTION................................................................................................9-3
9.2.2 TEST EXAMPLE 1.............................................................................................9-4
9.2.3 TEST EXAMPLE 2.............................................................................................9-9
9.2.4 TEST EXAMPLE 3...........................................................................................9-10
9.2.5 TEST EXAMPLE 4...........................................................................................9-11
9.3 INRUSH INHIBIT TEST
9.3.1 INRUSH INHIBIT TEST PROCEDURE ...........................................................9-12
9.4 OVEREXCITATION INHIBIT TEST
9.4.1 OVEREXCITATION INHIBIT TEST PROCEDURE .........................................9-13
9.5 FREQUENCY ELEMENT TESTS
9.5.1 TESTING UNDERFREQENCY AND OVERFREQUENCY ELEMENTS.........9-14
9.6 COMMISSIONING TEST TABLES
9.6.1 DIFFERENTIAL RESTRAINT TESTS..............................................................9-16
9.6.2 INRUSH INHIBIT TESTS.................................................................................9-16
9.6.3 OVEREXCITATION INHIBIT TESTS...............................................................9-17
A. FLEXANALOG AND
FLEXINTEGER
PARAMETERS
A.1 PARAMETER LISTS
A.1.1 FLEXANALOG ITEMS.......................................................................................A-1
A.1.2 FLEXINTEGER ITEMS....................................................................................A-23
B. MODBUS
COMMUNICATIONS B.1 MODBUS RTU PROTOCOL
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1
B.1.4 CRC-16 ALGORITHM........................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES ...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H)...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H).......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-5
B.2.6 EXCEPTION RESPONSES...............................................................................B-5

x T60 Transformer Protection System GE Multilin
TABLE OF CONTENTS
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION...............................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP.................................................................................B-8
B.4.2 DATA FORMATS............................................................................................. B-62
C. IEC 61850
COMMUNICATIONS C.1 OVERVIEW
C.1.1 INTRODUCTION ...............................................................................................C-1
C.1.2 COMMUNICATION PROFILES.........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW .......................................................................................................C-2
C.2.2 GGIO1: DIGITAL STATUS VALUES.................................................................C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES..............................................................C-2
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES.........................................C-2
C.2.6 MMXU: ANALOG MEASURED VALUES ..........................................................C-3
C.2.7 PROTECTION AND OTHER LOGICAL NODES...............................................C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................C-5
C.3.2 FILE TRANSFER...............................................................................................C-5
C.3.3 TIMESTAMPS AND SCANNING.......................................................................C-5
C.3.4 LOGICAL DEVICE NAME .................................................................................C-5
C.3.5 LOCATION ........................................................................................................C-5
C.3.6 LOGICAL NODE NAME PREFIXES..................................................................C-6
C.3.7 CONNECTION TIMING.....................................................................................C-6
C.3.8 NON-IEC 61850 DATA......................................................................................C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES.....................................................C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW .......................................................................................................C-7
C.4.2 GSSE CONFIGURATION..................................................................................C-7
C.4.3 FIXED GOOSE..................................................................................................C-7
C.4.4 CONFIGURABLE GOOSE................................................................................C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE ..........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS............................................................C-10
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW .....................................................................................................C-11
C.5.2 CONFIGURING IEC 61850 SETTINGS ..........................................................C-12
C.5.3 ABOUT ICD FILES..........................................................................................C-13
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP..............................C-17
C.5.5 ABOUT SCD FILES.........................................................................................C-17
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP...........................C-20
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................C-22
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................C-22
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT.........................................C-23
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE...............................................................................C-26
D. IEC 60870-5-104 COMMS. D.1 IEC 60870-5-104 PROTOCOL
D.1.1 INTEROPERABILITY DOCUMENT...................................................................D-1
D.1.2 POINT LIST.......................................................................................................D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT