Genebre 2114 10 User manual

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
1
INSTALLATION, OPERATION AND MAINTENANCE
MANUAL
Butterfly Valve with gear box
Grooved ends –UL/FM Certification
Ref. GENEBRE: 2114 –2114D

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
2
Installation, operation and maintenance instructions
1) PRODUCT DESCRIPTION.................................................................................................3
2) ASSEMBLY DRAWING AND PARTS LIST .......................................................................3
3) TRANSPORT AND STORAGE CONDITIONS ...................................................................4
4) INSTALLATION INSTRUCTIONS ......................................................................................4
4.1) PREPARATION ................................................................................................................................ 4
4.2) INSTALLATION OF VALVES WITH GROOVED END ............................................................................ 5
5) OPERATION INSTRUCTIONS ...........................................................................................6
5.1) USAGE ........................................................................................................................................... 6
5.2) HANDWHEEL OPERATION............................................................................................................... 6
5.3) Gear Box with Limit switches ……………………………………………………………….. 6
6) MAINTENANCE OPERATIONS .........................................................................................7
7) REPAIR INSTRUCTIONS...................................................................................................8
9) HYGIENE AND SAFETY INSTRUCTIONS: .......................................................................8

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
3
1. Product description
Genebre, S.A. offers a wide range of valves designed and assembled to handle and drive
fluids.
The compatibility of materials used to build the valves (see technical specifications) and the
application of valves to the different industrial processes is at user's risk. Valves will have an
optimal behaviour when working conditions do not exceed pressure and temperature limits
(pressure curve) for which they have been designed. Please, refer to the product datasheet.
Art. 2114 / 2114D: Ductile Iron Butterfly Valve with EPDM seal. UL/FM certification for use in
fire protection systems.
Art. 2114: Grooved ends for use in pipes according to ASTM / ASME standard.
Art. 2114D: Grooved ends for use in pipes according to DIN standard.
Note: Some pipe diameters are the same between both standards.
2. Assembly drawing and Parts List
Nº
Name
Material
Surface Treatment
1
Upper shaft nut
Carbon steel
------
2
Shaft seal
EPDM
------
3
Body
Ductile Iron
EN-GJS-400
Epoxy
4
Upper shaft
Stainless Steel AISI 416
------
5
Disc
Ductile Iron + EPDM
------
6
Lower shaft
Stainless Steel AISI 416
------
7
Lower shaft nut
Carbon steel
------
8
Stem bushing
PTFE
------
9
O’ring
EPDM
------

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
4
3. Transport and Storage conditions
Transport and storage of this kind of products must be done keeping them in their
original package!
VISUAL INSPECTION
Check whether during transport, unloading and placement the products have suffered
damages.
During storage it is recommended to keep them into the included protective wrapping to
avoid damages or dirt accumulation in the inside part of the valve. The wrap must not be
removed until valve is to be installed.
Valves must be stored in a dry and clean environment.
If you notice any kind of anomaly during reception of the goods, contact immediately with
GENEBRE in order to determine the possible responsibilities on the issue.
IMPORTANT NOTE:
Before installing and/or manipulating these elements, READ CAREFULLY these
instructions for use and OBSERVE all contained information. If you fail to
understand any of their content, please contact GENEBRE, S.A.
The responsibility for the safe use of these products lies with the user in
accordance with the provisions of these instructions for use as well as the specific
technical documentation of the device supplied!
4. Installation instructions
4.1) Preparation
Remove any material remains of the valve wrapping.
Serious problems may arise with the installation of a valve in a dirty pipe.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
5
Make sure the pipe is not dirty and doesn’t have welding particles, for example, before
installing it. This may cause irreparable damages in the valve when the equipment is started
→ prepare a clean working area.
Plan beforehand enough space for future maintenance operations.
Control the correct performance of the valve by turning the handwheel both sides (close and
open) and observing if the disc or needle slides correctly. If this is not the case, check if there
are foreign particles inside the valve and repeat the whole operation.
4.2) Installation of valves with grooved ends
Do not disassemble these valves for installation.
Make sure the pipe's and edges of the valve are clean.
Use the corresponding accessories for install the valve to the pipe (grooved coupling)
Make sure the coupling joints are well placed.
Make sure the pipe ends and the valve ends are compatible according to the outside
diameters (according to standard).
After assembling, check the tightness and performance of the valve.
Pipe
Ref.
Size
Dimensions
D E
ASTM /
ASME
2114 10
2 ½"
73
69.1
2114 11
3"
88.9
84.9
2114 12
4”
114.3
110.1
2114 13
5"
141.3
137
2114 14
6"
168.3
164
2114 16
8"
219.1
214.4
2114 18
10”
273
268.3
2114 20
12”
323.9
318.3
DIN
2114D 10
DN 65
76.1
72.3
2114D 13
DN 125
139.7
135.5
2114D 14
DN 150
165.1
160.8
2114D 16
DN 200
216.3
211.6

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
6
REMARKS:
- Gate Valves, ref. 2114 / 2114D are designed according to API 609 to be
assembled with grooved coupling according to AWWA C606 at a maximum
working pressure of 300 PSI.
- It is recommended the use of filters in the pipe to make the valves longer life.
- Any damaged paint/coating during installation must be immediately repaired.
5. Operation instructions
5.1) Usage
Butterfly valves art. 2114 / 2114D provide a leakproof seal when used adjusted to the
pressure and temperature values for which they have been designed.
Seat material for the valve, joints, body, disk and axis have to be fully compatible with the
fluid circulating through the valve. Otherwise, valve could be seriously damaged.
This valve is suitable for use in fire protection system.
5.2) Handwheel operation
The valves are designed to be manually operated by handwheel. Turn clockwise for closing
or turn counterclockwise for opening the valve.
5.3) Gear Box with Limit Switches

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
7
6. Maintenance operations
Butterfly valves are designed so that they do not need any lubrication and/or periodical
maintenance during their life cycle.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
8
However, periodical checks explained below will be useful to extend the service life of the
valve and reduce installation problems:
- Close the valve –from position completely open to completely closed.
- Verify all locks and threaded ends to check if they are loose or with rust. Tighten them if
necessary.
- Inspect the valve and surrounding areas to verify if there is any leakage in the stem or in the
flange connections.
7. Repair instructions
These types of valves, due to their assembling specifications are not worth repairing,
because most of the times are simply not cost-effective, so we recommend to directly replace
them.
8. Hygiene and Safety Instructions:
8.1)When operating valves, you must follow the security instructions and it is recommended
to use personal protection gadgets:
1) Protect your eyes.
2) Wear gloves and appropriate working clothes.
3) Wear safety footwear.
4) Wear a helmet.
5) Have running water at hand.
6) To operate flammable fluids, make sure you have an extinguisher at hand.
Before disassembling the pipe's valve to clean or replace it, make sure that line
has been closed and depressurized because a bad operational procedure could
cause a serious accident to staff and installation system
Before installing new valve, check if it meets the requirements of the valve
being replaced

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 10/08/2020 UPDATE NUMBER: 0
9
8.2) Before removing a valve from a pipe, check always if the line is completely drained and
depressurized.
8.3) Any type of repair or maintenance should be performed in ventilated places.