Genebre 2113 User manual

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
1
INSTALLATION, OPERATION AND MAINTENANCE
MANUAL
Butterfly Valve with gear box
Wafer type –UL/FM Certification
Ref. GENEBRE: 2113

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
2
Installation, operation and maintenance instructions
1) PRODUCT DESCRIPTION.................................................................................................3
2) ASSEMBLY DRAWING AND PARTS LIST .......................................................................3
3) TRANSPORT AND STORAGE CONDITIONS ...................................................................3
4) INSTALLATION INSTRUCTIONS ......................................................................................4
4.1) PREPARATION ................................................................................................................................ 4
4.2) ASSEMBLY.............................................................................¡ERROR!MARCADOR NO DEFINIDO.
5) OPERATION INSTRUCTIONS ...........................................................................................5
5.1) USAGE ........................................................................................................................................... 5
5.2) HANDWHEEL OPERATION............................................................................................................... 6
5.3) Gear Box with Limit switches ……………………………………………………………….. 6
6) MAINTENANCE OPERATIONS .........................................................................................7
7) REPAIR INSTRUCTIONS...................................................................................................7
9) HYGIENE AND SAFETY INSTRUCTIONS: .......................................................................8

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
3
1. Product description
Genebre, S.A. offers a wide range of valves designed and assembled to handle and drive
fluids.
The compatibility of materials used to build the valves (see technical specifications) and the
application of valves to the different industrial processes is at user's risk. Valves will have an
optimal behaviour when working conditions do not exceed pressure and temperature limits
(pressure curve) for which they have been designed. Please, refer to the product datasheet.
Art. 2113: Ductile Iron Butterfly Valve with EPDM seal. UL/FM certification for use in fire
protection systems.
2. Assembly drawing and Parts List
3. Transport and Storage conditions
Transport and storage of this kind of products must be done keeping them in their
original package!
Nº
Name
Material
Surface Treatment
1
Upper shaft nut
Carbon steel
------
2
Shaft seal
EPDM
------
3
Body
Ductile Iron
EN-GJS-400
Epoxy
4
Upper shaft
Stainless Steel AISI 416
------
5
Disc
Ductile Iron + EPDM
------
6
Lower shaft
Stainless Steel AISI 416
------
7
Lower shaft nut
Carbon steel
------
8
End face seal
EPDM
------
9
Stem bushing
PTFE
------
10
O’ring
EPDM
------

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
4
VISUAL INSPECTION
Check whether during transport, unloading and placement the products have suffered
damages.
During storage it is recommended to keep them into the included protective wrapping to
avoid damages or dirt accumulation in the inside part of the valve. The wrap must not be
removed until valve is to be installed.
Valves must be stored in a dry and clean environment.
If you notice any kind of anomaly during reception of the goods, contact immediately with
GENEBRE in order to determine the possible responsibilities on the issue.
IMPORTANT NOTE:
Before installing and/or manipulating these elements, READ CAREFULLY these
instructions for use and OBSERVE all contained information. If you fail to
understand any of their content, please contact GENEBRE, S.A.
The responsibility for the safe use of these products lies with the user in
accordance with the provisions of these instructions for use as well as the specific
technical documentation of the device supplied!
4. Installation instructions
4.1) Preparation
Remove any material remains of the valve wrapping.
Serious problems may arise with the installation of a valve in a dirty pipe.
Make sure the pipe is not dirty and doesn’t have welding particles, for example, before
installing it. This may cause irreparable damages in the valve when the equipment is started
→ prepare a clean working area.
Plan beforehand enough space for future maintenance operations.
Joints between valve and pipe flanges are not necessary, as the valve is designed to keep
tightness amongst them.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
5
4.2) Assembling
Leave enough space between the flanges so that valve can be easily inserted or removed.
Fully open the valve before tightening the screws of the flanges.
REMARKS:
- Butterfly Valves, ref. 2113 are designed according to API 609 to be assembled between
flanges ASME B16.10 Class 150 and EN 1092 PN 10/16 at a maximum working pressure of
300 PSI.
- Be extremely cautious when placing the valve in the center of the pipe axis to avoid
interferences between disk and inside part of the pipe. The valve must not be assembled in
any case if the internal diameter of the pipe is lower than the nominal diameter of the valve
- Verify good parallelism of the flanges.
- When assembling with a loose flange and a round pipe (or collar) try to avoid the weld bead
to stand out on the inside part of the pipe because this could damage the disk and even
render the valve inoperative
- Tighten the screws until the flanges make firm contact with the valve’s body
- It is recommended the use of filters in the pipe to make the valves longer life.
- Any damaged paint/coating during installation must be immediately repaired.
5. Operation instructions
5.1) Usage
Gate valves art. 2113 provide a leakproof seal when used adjusted to the pressure and
temperature values for which they have been designed.
Seat material for the valve, joints, body, disk and axis have to be fully compatible with the
fluid circulating through the valve. Otherwise, valve could be seriously damaged.
This valve is suitable for use in fire protection system.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
6
5.2) Handwheel operation
The valves are designed to be manually operated by handwheel. Turn clockwise for closing
or turn counterclockwise for opening the valve.
5.3) Gear Box with Limit Switches

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
7
6. Maintenance operations
Butterfly valves are designed so that they do not need any lubrication and/or periodical
maintenance during their life cycle.
However, periodical checks explained below will be useful to extend the service life of the
valve and reduce installation problems:
- Close the valve –from position completely open to completely closed.
- Verify all locks and threaded ends to check if they are loose or with rust. Tighten them if
necessary.
- Inspect the valve and surrounding areas to verify if there is any leakage in the stem or in the
flange connections.
7. Repair instructions
These types of valves, due to their assembling specifications are not worth repairing,
because most of the times are simply not cost-effective, so we recommend to directly replace
them.

Genebre Building. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
[e-mail] - www.genebre.es
GENEBRE S.A.
LAST UPDATE: 07/08/2020 UPDATE NUMBER: 0
8
8. Hygiene and Safety Instructions:
8.1)When operating valves, you must follow the security instructions and it is recommended
to use personal protection gadgets:
1) Protect your eyes.
2) Wear gloves and appropriate working clothes.
3) Wear safety footwear.
4) Wear a helmet.
5) Have running water at hand.
6) To operate flammable fluids, make sure you have an extinguisher at hand.
8.2) Before removing a valve from a pipe, check always if the line is completely drained and
depressurized.
8.3) Any type of repair or maintenance should be performed in ventilated places.
Before disassembling the pipe's valve to clean or replace it, make sure that line
has been closed and depressurized because a bad operational procedure could
cause a serious accident to staff and installation system
Before installing new valve, check if it meets the requirements of the valve
being replaced