Genie IPOC7T User manual

Ver. 2017.4.1
Quick Installation Guide
Powering and connecting 7 network cameras
over legacy 75ohm coaxial cables.
Please read and understand thoroughly this quick installation
guide before using and keep it for future reference.
7-BNC PORT
PoC & EoC
SWITCH
CAT-5e
CABLE
DC48V POWER
NVR/ROUTER
This IPOC7T is designed for upgrading analog camera system into network IP system.
This kit is capable of re-using legacy analog cable, transmitting both DC power and high-speed
network signals, and easy upgrading old analog systmes simply by replacing cameras & NVRs. Plug and Play,
easy to install of operate. This kit will save a great many of installation time & cable costs, especially for large
retro-t projects.
INSTALLATION MAP
UP TO 300m (1000ft)
OVER LEGACY COAX
PoE Output
Network Output
+12V DC Output
STANDARD
IP CAMERA
PoE IP
CAMERA
Transmitter
IPOC7T
STANDARD
IP CAMERA
IPOC7T
Network Output
+12V DC Output

2RJ45 Network Interface
3Power Indicating LED 4DC 48V Power Input
75ohm BNC Connector
1
2
3
4
1
A
B
C
CAT 5 Modular Plug (PoE Optional)
A
DC12V Power Output Plug
B
75ohm BNC Connector
C
165mm
165mm
68mm
60mm
45mm
DIAGRAM
IPOC-T: Transmitter
For 7 channel camera system
Plug & Play
IPOC1R: Reciever
ETHERNET
SWITCH
SWITCH
PoC & EoC
RECEIVER
300M(1000ft)
Power & Ethernet
Mixed Transmission
RECEIVER RECEIVER
NETWORK
CAMERAS
POWER (DC48V)
Note:
Max 7 cameras were supported transmitting Ethernet
signal in a LAN group. The default network password
is HomePlugAV. If many groups were added to the
same network, users need to set an unique password
for each group by our PC based utility software, so as
to avoid signal intererence during transmission.
Scan the QR-code on the right to
download the guiding steps on how
to set up the network password.
Or, the document is also available
from below link by website browser.
Web link:
http://okgo.top/14931080810048695.pdf
DIAGRAM SPECIFICATION
For multiple-camera system
ETHERNET
SWITCH
POWER
(DC48V)
POWER
(DC48V)
CONNECT
MORE GROUPS
GROUP 1 GROUP 2
ROUTER/ NVR/
UPPER HUB
HARDWARE INTERFACE
Connector type:
Cable type:
Range:
Bandwidth:
BNC 75ohm × 7
75ohm RG59 coaxial cable
upto 300m(1100ft) per channel
500Mbps ~1Gbps (total up + down)
PHYSICAL
Dimensions:
Weight:
Working temperature:
Relative humidity:
L153mm x W118mm x H35mm
450g
-10°C to +50°C
85% non-condensing
ETHRNET INTERFACE
Connector type:
Cable type:
Range:
RJ45
Straight through or cross-over
upto 100m (350ft)
POWER LED INDICATOR
ON:
OFF:
Normal power supply
Without power supply or there is
abnormalty in the circuit.
AC100V ~ AC240V
DC48V
3000mA
POWER
Input voltage:
Output voltage:
Supply current:
IPOC7T
© Genie CCTV Ltd 2017 All rights reserved.
MANUFACTURE:
Genie CCTV
www.geniecctv.com
[email protected]
PoE out PoE
Camera