GeoMax ZIPP10 pro series User manual

GeoMax Zipp10 Pro/Zoom40 Series
Quick Guide
Version 2.0

Quick Guide 5
Quick Guide 19
Guía Rápida 33
Guide abrégé 47
Guida rapida 61
Guia Rápido 75
Краткое руководство 89
en
de
es
fr
it
pt-br
ru

GeoMax Zipp10 Pro/Zoom40 Series
Quick Guide
Version 2.0
English

1 Important Information about your
Instrument
Read and follow the User Manual on the accompanying USB stick before
using the product.
Keep for future reference!
•Measuring horizontal and vertical angles.
•Measuring distances.
•Recording measurements.
•Visualizing the aiming direction and vertical axis.
•Data communication with external appliances.
•Computing by means of software.
The Zipp10 Pro/Zoom40 instrument contains the following laser products:
☞
Intended use
Laser products
Important Information about your Instrument 6
en

Laser product Laser class
EDM (Electronic Distance Measurement) module
•measurements with reflectors Class 1
•measurements without reflectors Class 3R
Laser plummet Class 2
Red laser pointer Class 3R
•The classification for the EDM and Laser plummet is in accordance
with IEC 60825-1 (2014-05).
Important Information about your Instrument 7
en

CAUTION
From a safety perspective, class 3R laser products should be treated as
potentially hazardous.
Precautions:
▶1.Prevent direct eye exposure to the beam.
2.Do not direct the beam at other people.
CAUTION
From a safety perspective, class 2 laser products are not inherently safe for
the eyes.
Precautions:
▶1.Avoid staring into the beam or viewing it through optical instru-
ments.
2.Avoid pointing the beam at other people or at animals.
Important Information about your Instrument 8
en

c
b
ZT20_003
a
a Laser beam (EDM)
b Laser beam (Laser
plummet)
c Exit for laser beam
(Laser plummet)
Locations of
laser apertures
Important Information about your Instrument 9
en

The product must not be disposed with household waste.
•FCC Part 15, 22 and 24 (applicable in US)
•Hereby, GeoMax AG, declares that the radio equipment type Zipp10
Pro/Zoom40 is in compliance with the Directive 2014/53/EU and
other applicable European Directives. The full text of the EU decla-
ration of conformity may be consulted at
"http://www.geomax-positioning.com/Downloads.htm".
Class 1 equipment according European Directive 2014/53/EU
(RED) can be placed on the market and be put into service with-
out restrictions in any EEA Member state.
•The conformity for countries with other national regulations not
covered by the FCC part 15, 22 and 24 or European directive
2014/53/EU has to be approved prior to use and operation.
Conformity to
national regula-
tions
Important Information about your Instrument 10
en

2 Instrument Components
003841_001
ab dc
efg
a Detachable carrying handle with mounting
screw
b Optical sight
c Objective with integrated Electronic Distance
Measurement (EDM). Exit for EDM laser
beam
d Vertical drive
e Compartment for USB cable port and USB
host port
f Levelling bubble
g Keyboard
Instrument com-
ponents part 1 of
2
Instrument Components 11
en

003872_001
ab
cd ef g
a Focusing telescope image
b Eyepiece; focusing graticule
c Battery cover
d Horizontal drive
e Foot screw
f Display
g Keyboard
Instrument com-
ponents part 2 of
2
Instrument Components 12
en

3 Technical Data
Temperature
Operating temperature [°C] Storage temperature [°C]
-20 to +50 -40 to +70
Protection against water, dust and sand
IP54 (IEC 60529)
Humidity
Max 95 % non condensing.
The effects of condensation are to be effectively counteracted by periodi-
cally drying out the instrument.
Environmental
specifications
Technical Data 13
en

4 Care and Transport
•Carry the product in its original container or carry the tripod with its
legs splayed across your shoulder, to protect the product against
shock and vibration.
•Periodically carry out test measurements and perform the field adjust-
ments indicated in the User Manual, particularly after the product has
been dropped, stored for long periods or transported.
Care and trans-
port
Care and Transport 14
en

5 Operation
003354_002
3
2
1
4
ON
OFF
Turning on and
off the instru-
ment
Operation 15
en

The battery must be charged before using it for the first time.
☞
Operation 16
en

GeoMax AG
www.geomax-positioning.com
820960-2.0.0en
Original text (820960-2.0.0en)
© 2017 GeoMax AG, Widnau, Switzerland

GeoMax Zipp10 Pro/Zoom40 Serie
Quick Guide
Version 2.0
Deutsch

1 Wichtige Informationen über Ihr
Instrument
Lesen und befolgen Sie die Gebrauchsanweisung auf dem beigefügten USB-
Stick, bevor Sie das Produkt verwenden.
Sorgfältig aufbewahren!
•Messen von Horizontal- und Vertikalwinkeln.
•Messen von Distanzen.
•Registrierung von Messdaten.
•Visualisierung der Ziel- und Stehachse.
•Datenübertragung mit externen Geräten.
•Berechnungen mittels Software.
Das Zipp10 Pro/Zoom40 Instrument enthält die folgenden Laserprodukte:
☞
Verwendungs-
zweck
Laserprodukte
Wichtige Informationen über Ihr Instrument 20
de