GeoVision GV-SD010-18X User manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
User's Manual
GV-IP Speed Dome

© 2009 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part,
without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision is not responsible for printing or clerical errors.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: [phone]
Fax: [phone]
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows XP
are registered trademarks of Microsoft Corporation.
November 2009

Preface
Welcome to the GV-IP Speed Dome User’s Manual.
There are two types of the GV-IP Speed Dome, Indoor and Outdoor. Each type also has a
series of models designed to meet different needs:
Application Model
GV-SD010-18X
GV-SD010-23X
Indoor
GV-SD010-36X
GV-SD010-S18X
GV-SD010-S23X
Outdoor
GV-SD010-S36X
This Manual provides an overview of the GV-IP Speed Dome and its accessories. The
instructions will guide you through the installation and use of the GV-IP Speed Dome as well.

i
Contents
Regulatory Notices................................................................................................... v
Chapter 1 Introduction........................................................................................... 1
1.1 Overview...................................................................................................................1
1.2 Packing List .............................................................................................................. 2
1.2.1 GV-IP Speed Dome of Indoor Type ..............................................................2
1.2.2 GV-IP Speed Dome of Outdoor Type............................................................3
1.3 Functional Panel....................................................................................................... 4
1.3.1 GV-IP Speed Dome of Indoor Type ..............................................................4
1.3.2 GV-IP Speed Dome of Outdoor Type............................................................5
1.4 Preparing for Outdoor-Type Dome Setup ................................................................. 6
1.5 Communication Switch ............................................................................................. 9
1.6 22-Pin Data Cable .................................................................................................. 10
1.7 Optional Accessories .............................................................................................. 12
Chapter 2 Installing the GV-IP Speed Dome ...................................................... 15
2.1 Ceiling Mount.......................................................................................................... 16
2.1.1 Surface Mount (Indoor Use Only) ...............................................................16
2.1.2 Flush Mount (Indoor Use Only)...................................................................19
2.1.3 Straight Tube Mount (Indoor Type) .............................................................22
2.1.4 Straight Tube Mount (Outdoor Type)...........................................................24
2.2 Wall Mount.............................................................................................................. 25
2.2.1 Standard Pendent Mount ............................................................................25
2.2.2 Mini Pendent Mount....................................................................................28
2.2.3 Wall Box Mount...........................................................................................29
2.3 Corner Mount.......................................................................................................... 31
2.3.1 Corner Plate Mount.....................................................................................31
2.3.2 Corner Thin Box Mount...............................................................................33
2.4 Pole Mount ............................................................................................................. 35
2.4.1 Pole Thin Direct Mount ...............................................................................35
2.4.2 Pole Thin Box Mount ..................................................................................37
Chapter 3 Accessing the GV-IP Speed Dome .................................................... 39
3.1 Accessing Your Surveillance Images...................................................................... 39
3.2 Functions Featured on the Main Page ................................................................... 40
3.2.1 The Live View Window ...............................................................................40
3.2.2 The Control Panel of the Live View Window...............................................42
3.2.3 Snapshot of a Live Video............................................................................43
3.2.4 Video Recording .........................................................................................43

ii
3.2.5 Picture-in-Picture and Picture-and-Picture View.........................................43
3.2.6 Alarm Notification........................................................................................46
3.2.7 Video and Audio Configuration ...................................................................47
3.2.8 Remote Configuration.................................................................................47
3.2.9 Camera Name Display................................................................................48
3.2.10 Image Enhancement.................................................................................48
3.2.11 PTZ Control...............................................................................................49
3.2.12 Visual PTZ ................................................................................................50
3.2.13 I/O Control ................................................................................................51
3.2.14 Network Status..........................................................................................51
Chapter 4 PTZ Control Panel .............................................................................. 52
4.1 Preset Settings ....................................................................................................... 54
4.2 Cruise Settings ....................................................................................................... 54
4.3 Auto Pan Mode Settings......................................................................................... 55
4.4 PTZ Setting- Sequence Settings ............................................................................ 56
4.5 PTZ Setting- Advanced........................................................................................... 57
4.6 Image Setting- White Balance ................................................................................ 59
4.7 Image Setting- Auto Exposure................................................................................ 60
4.8 Image Setting- Mask............................................................................................... 62
4.9 Image Setting- Other .............................................................................................. 64
4.10 System Configuration ........................................................................................... 65
Chapter 5 Configuration Menu............................................................................ 66
5.1 Video & Motion ....................................................................................................... 67
5.1.1 Video Settings.............................................................................................67
5.1.2 Motion Detection.........................................................................................71
5.2 Digital I/O & PTZ..................................................................................................... 72
5.2.1 Input/Output Settings ..................................................................................72
5.2.2 PTZ Settings ...............................................................................................74
5.3 Events & Alerts ....................................................................................................... 74
5.3.1 E-mail..........................................................................................................75
5.3.2 FTP .............................................................................................................76
5.3.3 Center V2....................................................................................................78
5.3.4 VSM ............................................................................................................80
5.3.5 3GPP ..........................................................................................................82
5.4 Monitoring............................................................................................................... 83
5.5 Recording Schedule ............................................................................................... 84
5.5.1 Recording Schedule Settings .....................................................................84
5.5.2 I/O Monitoring Settings ...............................................................................85

iii
5.6 Network .................................................................................................................. 86
5.6.1 LAN.............................................................................................................86
5.6.2 Advanced TCP/IP .......................................................................................88
5.6.3 IP Filter .......................................................................................................90
5.7 Management........................................................................................................... 91
5.7.1 Date and Time Settings ..............................................................................91
5.7.2 GPS Maps Settings ....................................................................................93
5.7.3 User Account ..............................................................................................95
5.8.6 Log Information...........................................................................................96
5.8.7 Tools ...........................................................................................................97
Chapter 6 Advanced Applications ...................................................................... 98
6.1 Upgrading System Firmware .................................................................................. 98
6.1.1 Using the Web Interface .............................................................................98
6.1.2 Using the IP Device Utility ..........................................................................99
6.2 Backing Up and Restoring Settings...................................................................... 101
6.3 Restoring to Factory Default Settings................................................................... 103
Chapter 7 DVR Configurations ......................................................................... 104
7.1 Setting Up IP Cameras......................................................................................... 105
7.2 Remote Monitoring with Multi View ...................................................................... 109
7.3 Remote Monitoring with E-Map .............................................................................111
Chapter 8 CMS Configurations ..........................................................................113
8.1 Center V2 ............................................................................................................. 113
8.2 VSM...................................................................................................................... 115
8.3 Dispatch Server .................................................................................................... 116
Chapter 9 Mobile Phone Connection......................................................................117
9.1 PDA ...................................................................................................................... 118
9.1.1 Installing GView V2................................................................................... 118
9.1.2 Activating the GView Function.................................................................. 118
9.1.3 Connecting to GV-IP Speed Dome ........................................................... 119
9.2 Windows Smartphone .......................................................................................... 120
9.2.1 Installing MSView V2 / V3.........................................................................120
9.2.2 Activating the MSView V2 / V3 Function...................................................120
9.2.3 Connecting to GV-IP Speed Dome ...........................................................120
9.3 Symbian Smartphone ........................................................................................... 122
9.3.1 Installing SSView V3.................................................................................122
9.3.2 Activating the SSView V3 Function...........................................................123
9.3.3 Connecting to GV-IP Speed Dome ...........................................................123
9.3.4 Quick Connection .....................................................................................124

iv
9.4 3G Mobile Phone.................................................................................................. 124
9.4.1 Activating the 3G Mobile Phone Function.................................................124
9.4.2 Connecting to the GV-IP Speed Dome .....................................................124
Chapter 10 Optional Power Box......................................................................... 126
10.1 Power Box Overview .......................................................................................... 126
10.2 Installation .......................................................................................................... 128
10.3 Optional Power Box Specifications..................................................................... 129
GV-IP Speed Dome Specifications ...................................................................... 130
Appendix……. ....................................................................................................... 132
Shutter Speed ............................................................................................................... 132

v
Regulatory Notices
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
Class A
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own
expense.
CE Notice
This is a Class A product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
RoHS Compliance
The Restriction of Hazardous Substances (RoHS) Directive is to forbid the use of hazardous
materials of production. To meet the RoHS Directive requirements, this product is made to be
RoHS compliant.
WEEE Compliance
This product is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive
and made compliant with the WEEE requirements.

Introduction
1
1
Chapter 1 Introduction
1.1 Overview
To meet different needs, the GV-IP Speed Dome is offered in two types: indoor and outdoor.
Through both web-based configurations, it is easy to configure and manage the GV-IP Speed
Dome.
The GV-IP Speed Dome provides variable pan/tilt speeds ranging from a fast patrol of 400°
per second to a slow ramble of 5° per second with 0.225° pan accuracy for fast and accurate
tracking ability. The 360° endless rotation and -10°~190° tilt travel make tracking the object
passing directly beneath the GV-IP Speed Dome. Maximum 64 preset points can be
programmed for precise location of target areas, and users can also define 8 sequences, 4
auto-pan modes and 4 cruise routes for the Dome to operate automatically.
The GV-IP Speed Dome provides 4 alarm inputs and 1 alarm relay output, and the alarm
management can be done through the network as well.
Features:
•18x, 23x, 36x optical zoom
•CIF and D1 resolution
•H.264, MPEG 4 and MJEPG video compression
•BNC out, 2-way audio
•4 digital inputs, 1 relay output
•Preset speed up to 400°/sec
•Auto calibration
•Digital image flip
•Minimum illumination 0.01 lux (B/W)
•Wide dynamic range

2
1.2 Packing List
1.2.1 GV-IP Speed Dome of Indoor Type
1
Dome Body
2
Hard Ceiling Mount and Decoration Ring
3
Optical Cover
4
Data Cable for Power Supply, Video, Audio and
Alarm (Length: 1.3 m / 4.27 ft )
5 Power Adaptor
6 GV-IP Speed Dome User’s Manual
7 GV-IP Speed Dome Software DVD

Introduction
3
1
1.2.2 GV-IP Speed Dome of Outdoor Type
1.
+
Dome Body with Outdoor Mount Kit
(which is attached to the Dome)
2.
Optical Cover
3.
Data Cable for Power Supply, Video, Audio and Alarm
(Length: 5 m / 16.4 ft )
4.
Lubricant
5.
M3 Standard Screw (x 1), M3 Security Screw (x1),
M5 Standard Screw (x1), M5 Security Screw (x1)
6. Security Torx
7.
Waterproof Rubber
8. Power Adaptor
9. GV-IP Speed Dome User’s Manual
10. GV-IP Speed Dome Software DVD
Note:
1. Outdoor Mount Kit is different from optional Indoor Mount Kit. The two Kits cannot be
replaced by each other.
2. Lightly rub a thin layer of lubricant onto the Waterproof Rubber of the Dome cover
before attaching the Dome cover to the body.

4
1.3 Functional Panel
1.3.1 GV-IP Speed Dome of Indoor Type
Figure 1-1
No. Name Function
1 Reset Resets the GV-IP Speed Dome and keeps all
current configurations.
2 Default
Restores all the settings, except PTZ settings, to
the factory default values. For details see 7.3
Restoring to Factory Default Settings.
3 Ethernet A plug for inserting an Ethernet cable to build the
network connection.
4 22-Pin Connector For details, see 1.6 22-Pin Data Cable.
5 Communication Switch For details, see 1.5 Communication Switch.
6 Reserved (for hardware firmware upgrade)

Introduction
5
1
1.3.2 GV-IP Speed Dome of Outdoor Type
Figure 1-2
No. Name Function
1 Reset Resets all configurations of GV-IP Speed Dome.
2 Default
Restores all the settings, except PTZ settings, to
the factory default values. For details see 7.3
Restoring to Factory Default Settings.
3 22-Pin Connector For details, see 1.6 22-Pin Data Cable.
4 Ethernet A plug for inserting an Ethernet cable to build the
network connection.
5 Communication Switch For details, see 1.5 Communication Switch.
6 Reserved (for hardware firmware upgrade)

6
1.4 Preparing for Outdoor-Type Dome Setup
The GV-IP Speed Dome of outdoor type is equipped with the sunshield housing. Follow the
steps below to complete the housing installation.
1. Unpack the package and take out the GV-IP Speed Dome.
Figure 1-3
2. Rotate the top holder and take it off from the Dome body.
Figure 1-4
Figure 1-5

Introduction
7
1
3. Remove the protective cover and PE sheet.
Figure 1-6
4. Lightly rub a thin layer of lubricant onto the waterproof rubber of the Dome cover before
attaching the cover to the body.
Figure 1-7
Note that the tiny protrusion on the cover must align with one of the four holes on the
Dome body.
Figure 1-8

8
5. Gently press down the Dome cover with two hands on the side of it.
Figure 1-9
DO NOT press the cover as shown in the figure. This might damage the Dome.
Figure 1-10
6. Screw the Dome cover and body together.
Figure 1-11

Introduction
9
1
1.5 Communication Switch
You can find the Communication Switch below in both indoor and outdoor types of GV-IP
Speed Domes.
Figure 1-12
SW 1
SW 2
SW 3
SW 4
Not Functional
SW 5 Default
SW 6 Not Functional
SW5 is used to restore all the PTZ settings to original default values. Follow the steps below
to restore default PTZ values:
1. Disconnect the power to the Dome.
2. Push SW5 upward to ON.
3. Reconnect the power to the Dome. The process of loading default PTZ values is complete
and you have to reset the Dome.
4. Disconnect the power to the Dome again.
5. Push SW5 downward to OFF.
6. Reconnect the power to the Dome. All the PTZ settings are returned to default values.
Note: Normally you should use the Web interface to restore all the PTZ settings to the factory
default values. For this operation, see 4.10 System Configuration.

10
1.6 22-Pin Data Cable
With the 22-pin Data Cable, you can connect the power, microphone, speaker, TV monitor
and I/O devices to the GV-IP Speed Dome. The Data Cable is illustrated as below.
I/O Wires
Audio Input
Speaker Output
TV Output
Power Input
Power Adaptor
22-Pin Data Cable
Figure 1-13
I/O Wire Definition
The I/O wires on the Data Cable allow you to connect 4 alarm input and 1 output devices.
Connect the I/O devices based on the wire definition listed below.
No. Wire Definition
1 Red / White Input 1
2 Gray Input 2
3 Purple Input 3
4 Blue Input 4
5 White / Black Not functional
6 Orange / Black Not functional
7 Purple / White Not functional
8 Gray / Balck Not functional
9 Brown / White Input GND
10 Blue / White Not functional
11 Green / Black Output (COM)
12 Black / White Output (N/O)
13 White Output (N/C)

Introduction
11
1
Wire Definition for Power Input
Connect the three wires of Power Adaptor to the 3-pin terminal block of power input, based on
the following wire assignments.
Figure 1-14
Wire Assignments for 220 V Power Adaptor
Wires of 3-Pin Terminal Block Wires of Power Adaptor
Red Blue
Yellow Yellow
Black Brown
Wire Assignments for 110 V Power Adaptor
Wires of 3-Pin Terminal Block Wires of Power Adaptor
Red White
Yellow Green
Black Black
Note: When wiring the power cable, ensure the Ground wire inserted into the mid-pin of the
terminal block.

12
1.7 Optional Accessories
Optional accessories can be ordered separately depending on the application requirements.
Contact your dealer for more information.
Model Number Name Details
Height: 250 mm / 9.8 in
Diameter: 50 mm / 2 in
Weight: 1 kg / 2.2 lb
81-D7H03-ST1 Straight Tube
(25 cm)
Supplied with rubber washer-8 x 1,
pendent tube washer x 1, spring washer -8 x 1,
waterproof rubber x 1, M8-12 screw x 1
Height: 500 mm / 19.7 in
Diameter: 50 mm / 2 in
Weight: 1.8 kg / 4 lb
81-D7H03-ST2 Straight Tube
(50 cm)
Supplied with rubber washer-8 x 1,
pendent tube washer x 1, spring washer -8 x 1,
waterproof rubber x 1, M8-12 screw x 1
Dimensions (L x W x D):
184 x 104 x 115.2 mm / 7.24 x 4.09 x 4.54 in
Weight: 0.6 kg (1.2 lb)
81-D7H03-WMP Mini Pendent Mount
Supplied with rubber washer-8 x 1,
pendent tube washer x 1, spring washer-8 x 1,
M8-12 screw x 1.
Dimensions (L x W x D):
348 x 104 x 138.6 mm / 13.7 x 4.1 x 5.5 in
Weight: 1.5 kg / 3.3 lb
81-D7H03-WSP Standard Pendent
Mount
Supplied with rubber washer-8 x 1,
pendent tube washer x 1, spring washer-8 x 1,
M8-12 screw x 1
Dimensions (L x W x D):
222 x 204 x 117 mm / 8.7 x 8 x 4.6 in
Weight: 2 kg / 4.4 lb
81-D7H05-CST Corner Plate Mount
Supplied with washer-8 x 4, spring washer x 4,
M8-16 screw x 4, M8 nut x 4