GeoVision GV-POE2411-V2 User manual

December 13, 2017
1
GV-POE2411-V2 24-Port Gigabit 802.3at Web Management
PoE Switch
Packing List
1. GV-POE2411-V2 x 1
2. AC Power Cord x 1
3. Screw x 8
4. Rack Mount Kit x 1
5. Download Guide x 1
6. GV-POE2411-V2 Installation Guide x 1
Front Panel
Note: If any of these items is found missing or damaged, please contact your local
supplier for replacement.
LED Display Gigabit SFP
Gigabit RJ-45
Reset Button

December 13, 2017
2
24 Port Gigabit with 4 SFP PoE+ Management Switch
Power Reset
6
F2
F3
F4
F1 F2 F3 F4
2 4
1 3
8
5 7 9 11 13 15
10 12 14 16
Combo
F1 1
LINK/ACT
PoE
LINK/ACT
PoE
35 7 9 11 13 15
161412108642 18
17
2420 2218
17 19 21 23
20 22 24
19 21 23
IMPORTANT:The 4 SFP ports labeled F1 ~ F4 are associated with the 4 RJ-45 ports
labeled 1 ~ 4 respectively. When one of the two associated ports is used, the other port will
not work. For example, if the Gigabit SFP port labeled F1 is used, the Gigabit RJ-45 port
labeled 1 will not function.
LED Indicators on the switch
LED Color/Status Description No. of LED
Power Amber On Power on Power
Off Power off
Link / ACT
Green On Link Up
Port 1~24
(10/100 M/
1000 M)
Green Blinking Data activating
Off No connection
PoE Amber On Port is linked to Power Device
Off No Power Device is connected
SFP Green On Link Up
Port F1~F4
Green Blinking Data activating

December 13, 2017
3
Connecting up to 23 GV-IP Cameras and 1 GV-NVR/DVR System
Through twisted pair cables, this switch can be connected to up to 23 GV-IP Cameras and 1
GV-NVR/DVR System. You can also extend the connections by connecting to other switches.
GV-NVR/DVR System GV-IP Camera x 23
Switch
Note: The maximum cable length for Gigabit RJ-45 is 100 meters. For connection that
exceeds 100 meters, you can use the Gigabit SFP ports.
Accessing Web Interface
Note: The device has a default IP \\192.168.0.250. The default Password to log in is admin.
1. To access the Web user interface, type the default IP \\192.168.0.250 into your Web
browser.
2. When the User Log In page appears, type the default Password admin and click Apply.
3. When you successfully log in, the Main Page appears. And you can select the functions
from the left menu to manage the switch.

December 13, 2017
4
Loading Default Setting
You can load the default value with the Reset button or with the Web interface.
Hardware
1. Turn on the switch.
2. Press and hold the Reset button on the front panel of the switch for 5 seconds until all
the LED start blinking.
3. Release the button. The switch is restored to its default settings.
Note: After restoring default settings, you will need to configure IP address, ID and
Password again.
Web Interface
1. On the Web interface, select Factory Default. This page appears.
2. Click Yes to restore the switch to the original configuration.
Note: Loading default from the Web interface will not change the user name, password
and IP configuration. If you want to restore the default setting of IP address, user name
and password, press the Reset button on the front panel of the switch.

December 13, 2017
5
Updating Firmware
1. On the Web interface, select Software Upload. This page appears.
2. Click Browse to select the latest firmware file (.bin) for update.
3. Click Upload. The uploading process is started.
4. After the firmware is successfully uploaded, click Logout from the left menu and re-login
the switch.

December 13, 2017
6
Specifications
Ports
Number of Ports
24 ports
24-port 10/100/1000BaseT(X) with RJ-45 Connectors, PoE+
4-port SFP Combo uplink Port
Performance
MAC Address 8 K
Buffer Memory 4 M bits
Jumbo Frames 9.6 KB
Transmission Method Store and Forward
Transmission Media 10/100BaseT(X) Cat. 5 UTP/STP
1000BaseT Cat. 5e, 6 UTP/STP
Filtering / Forwarding
Rates
10 Mbps port - 14,880 pps
100 Mbps port - 148,800 pps
1000 Mbps port - 1,488,000 pps
Smart Features
Port Based VLAN 24
Tag Based VLAN 16, VID = 1~4094
IGMP Snooping V1 & V2
Link Aggregation Up to 8 groups
Quality of Service (QoS) Up to 4 queues, 802.1p, DSCP
Security IEEE 802.1X, Source IP Filter
Port Management Port State, Speed/Duplex, Flow Control Configuration, Port
Mirroring, Bandwidth Control, Broadcast Storm Control, PoE
Administrator
Management
Web Management, Password Protection, Configuration
Backup/Restore, Firmware Upgrade
Mechanical Characteristics
LED Indicators
Per Port: Link/Act
PoE Act/Status
Power
Electrical Characteristics
PoE
Power
Input 100 ~ 240 V/AC, 50 ~ 60 Hz
Output IEEE 802.3at Compliant Voltage, Per Port Max. 30 W
(24 Ports at Full 15.4 W / 13 Ports at Full 30 W)
Max. Power
Consumption 400 W

December 13, 2017
7
General
Dimensions (H x W x D) 44 x 440 x 331 mm (1.73 x 17.3 x 13.03”)
Weight 4.7 kg (10.36 lb)
Operating Temperature 0°C ~ 40°C (32°F ~ 104°F)
Storage Temperature -20°C ~ 90°C (-4°F ~ 194°F)
Humidity 10% ~ 90% RH (non-condensing)
Standards and Regulatory
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.3ad Link Aggregation Control Protocol
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-based Network Access Control
IEEE 802.3at Power Over Ethernet (PoE+)
Regulatory CE, FCC Class A
Note: Specifications are subject to change without prior notice.