GFW BELLA 8165 User manual

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Thank you for purchasing the BELLA DRESSING TABLE SET. Please read the instructions
carefully to ensure safe operation of the product.
W1100x D510x H1436mm
COLOUR: BLACK,WHITE, GREY
PLEASE READthis sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fiings check list. Do not destroy any of the
packaging unl you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construcon of this unit. These loose items should be kept away from young
children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required:
x 2
Batch No.:WMI16017
Page 1of 9

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 2of 9
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
INFORMATION
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area
for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled as illustrated before use.
•Check all screws or bolts are tightened and inspect regularly
•Tools are not included.
WARNINGS
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Do not use power tools to construct this product.
•Do not tighten screws until fully assembled.
•Do not over tighten screws or bolts.
•Do not use this product if parts are missing, damaged or worn.
•Do not sit or stand on the dresser.
•If a mirror component is chipped or broken, stop using the product and consult the manufacturer or supplier
•Do not lean on the vertical mirror surface
•Do not strike the mirror with hard or pointed items.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
•When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soft soap if necessary; do
not use washing powders or any other substances containing abrasives since these substances scratch glass.

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 3of 9
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 4of 9
Parts and Fings Checklist
Please check the pack contents before assembling this product. If any components are missing, please contact your
retailer.
The fings pack contains small items that should be kept away from small children.
Parts (Dresser)
1. DRESSER TOP - 1 Piece 2. DRESSER LEG - 4 Pieces 3. MIRROR BASE - 1 Piece 4.MIRROR SUPPORT -
2Pieces
5. MIRROR- 1 Piece 6. SIDE MIRROR - 2 Pieces
10 mm
20 mm
30 mm
40 mm
50 mm 60 mm 70 mm 80 mm 90 mm
Flxlng (to scale)
Dimenslons
Ref Qty
A
C
F
( Not to scale)
LARGE BOLT
M8x60 2
10
ALLEN KEY M4
SMALLBOLT
M6x35
DSCREW-M6x20mm 8
GCORNER STRAP4
E16
WASHER
8x19x1.5mm
1
Fittings (Dresser)
CAUTION: Thereare many small components used in the construction of this product.
Pleasekeep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 5of 9
Layout Parts on Soft Surface
Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton to avoiddamage.

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 6of 9
Parts Required
STEP 1
1 . DRESSER TOP x 1
2 . DRESSER LEGS x 4
D . SCREW x 8
E . WASHERS x 8
G . CoRNER STRAP x 4
Parts Required
STEP 2
5 . MIRROR x 1
6 . SIDE MIRRORS x 2
A . LARGE BOLT x 2
F . ALLEN KEY
6F . ALLEN KEY

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 7of 9
Parts Required
STEP 3
3 . MIRROR BASE x 1
5 . MIRROR x 1
6 . SIDE MIRRORS x 2
STEP 4
C
E
F
Parts Required
6
5
C . SMALL BOLT x 8
4 . MIRROR SUPPORTS
x 2
F . ALLEN KEY
5 . MIRROR x 1
6 . SIDE MIRRORS x 2
E . WASHERS x 8
C . SMALL BOLT x 2
F . ALLEN KEY
E . WASHERS x 2

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 8of 9
Parts (Stool)
7. SEAT - 1 Piece 8. LEG - 4 Pieces
10 mm
20 mm
30 mm
40 mm
50 mm 60 mm
70 mm
80 mm 90 mm
Flxlng (to scale)
Qty
Dimenslons
Ref
B
F
( Not to scale)
BOLT-M6x50 8
ALLEN KEY M4
E8
WASHER
8x19x1.5mm
1
Fings (Stool)
Parts Required
STEP 1
7 . SEAT x 1
8 . LEGS x 4
B . BOLT x 8
E . WASHER x 8
F . ALLEN KEY
7
8
8
8
8E
B
F
E
B
F

BELLA DRESSING TABLE SET
ASSEMBLY INSRTUCTIONS
Batch No.:WMI16017
Page 9of 9
Complete Assembly
Your BELLA DRESSING TABLE SET is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference