GFW MIRROR SHOE CABINET User manual

Size : (W)500 x (D)300 x (H)1800 mm
Colour : Black / White / Oak
500
1800
Thank you for purchasing the MIRROR SHOE CABINET.
Please read the instructions carefully to ensure safe operation of the product.
Page 1 of 10
300
Batch No : PO# 2759
MIRROR SHOE CABINET (1800MM) ASSEMBLY INSTRUCTIONS

Page 2 of 10
it is recommended this weight is not exceeded.
Due to the size of this product we recommend that is assembled in the room intended for use.
When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
Unwrap all packaging materials and place the components on top of the carton box or not on a clean floor to
prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Tools not included.
DO NOT use power tools to construct this product.
DO NOT tighten screw until fully assembled.
DO NOT over tighten screw or bolts.
DO NOT use this product if parts are missing, damage or worn.
DO NOT stand or sit on this mirror shoes cabinet.
The chest must be fitted using the wall brackets provided to avoid accidents and possible serious
injuries if the item falls over or tips over during use
Always ensure the wall area to be drilled is free of electrical wires, water and gas pipes.
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
This product is intended for a maximum weight of 25.8kgs. distributed evenly throughout the cabinet.
Wall fixings supplied are suitable for solid walls. For other types of wall suitable fixings must be
obtained separately . If in doubt please consult a qualified tradesperson

Side Panel (L) (15 x 298 x 1800mm)A 1
BSide Panel (R) (15 x 298 x 1800mm) 1
CTop Panel (15 x 298 x 470mm) 1
DBottom Panel (15 x 298 x 470mm) 1
EFront Bar Panel (15 x 60 x 470mm) 2
GDoor (15 x 495 x 1736mm) 1
FRear Bar Panel (15 x 60 x 470mm) 2
YBack Panel (2.5 x 248 x 1736mm) 1
Page 3 of 10
A
D
E
B
C
Y
Y
G
F
F
E

5
3
3x
g
Hinges Outside
5/8”
16x
a
CSK Screw
M4.7 x 38mm
8x
c
Wooden Dowel
D6 x 30mm
16x
e
Csk Screw
M3.5 x 16mm
46x
d
Nail Pin
(26mm)
4x
f
Nail Leg
5 x 8 x 13.5mm
Page 4 of 10
2x
i
L-Mounting
Bracket
16x
j
Sticker
19mm
2x
h
Wall Plug
1x
l
Aluminium Handle
32mm Hole
2x
m
Door Buffer
10mm
9x
k
Metal Rod
M5 X 490mm
2x
b
CSK Screw
M4 x 38mm

STEP 1
STEP 2
8 x
c
Parts Required Qty
Panel (E) 2
Page 5 of 10
b
Parts Required Qty
Panel (G) 1
c
3 x
g
6 x
e
g
e

STEP 2
Parts Required Qty
Panel (A) 1
Panel (C) 1
Parts Required Qty
Panel (D) 1
Panel (F) 2
Parts Required Qty
Panel (E) 2
STEP 3
Page 6 of 10
9 x
k
i
e
8 x
a
a
k

STEP 5
STEP 6
g
f
f
Parts Required Qty
Panel (F) 1
Parts Required Qt
Panel (B) 1
Page 7 of 10
g
46 x
dd
a
4 x
8 x
c
f
d
f

STEP 7
STEP 8
Page 8 of 10
Parts Required Qty
Panel (F) 1
Parts Required Qt
Panel (G) 1
2 x
e
2 x
h
i
b
e
h
2 x
a
2 x
i
6 x
e
IMPORTANT THE CABINET MUST
BE FIXED TO THE WALL BEFORE
FITTING THE DOOR
• Always ensure the wall area to be drilled is free
of electrical wires, water and gas pipes.
obtained separately . If in doubt please consult a

STEP 10
STEP 9
Page 9 of 10
2 x
e
16 x
j
1 x
l
2 x
m
m
l
m
je

Your MIRROR SHOES CABINET is now completely assembled
Page 10 of 10