GFW Marianne Nest of Tables User manual

Large Table Size: 49 x 38 x 51 cm (WDH)
Small Table Size: 32 x 38 x 40 cm (WDH)
Colour: Ivory
MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Marianne Nest of Tables.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 020517
Page 1of 6
Tools Required
Number of people
x1
0.5 Hour
Set Up
PLEASEREAD this sheet prior to assembly to familiarise yourself with the various stages of
construction. Carefully open the pack supplied and check the contents against the parts and
fittings check list. Do not destroy any of the packaging until you are certain that you have all
the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit.
These loose items should be kept away from children whilst assembling your unit to avoid the
danger of choking.

MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Batch No. 020517
Page 2of 6
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
WARNINGS
This product is designed to hold 8 Kg in total, spread evenly over the whole set.
Do not exceed this weight.
We recommend that this set is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that the products are fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
drag the tables across the floor or legs may be damaged - lift carefully into position.
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use these products if parts are missing, damaged or worn.
sit or stand on the tables.

MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Batch No. 020517
Page 3of 6
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer.
The fittings pack contains small items that should be kept away from children.
All parts are packed in one carton
Description: Small Table Legs
Qty: 4
Size: 385 x 50 x50 mm
Carton No: 1/1
Carton No: 1/1 Carton No: 1/1
4
Qty: 1
Qty: 1
Size: 490 x 380 x 65 mm
Size: 380 x 320 x 65 mm
1
2
3
Description: Large Top Panel Description: Large Table Legs
Qty: 4
Size: 495 x 50 x50 mm
Carton No: 1/1
Description: Small Top Panel
1
2
2
2
23
4
4
4
4

MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Batch No. 020517
Page 4of 6
16A
16B
Item QuantityCode
Fittings (to scale)
Flat Washer
Bolt (M6x35mm)
10 20 30 40 50 60 70 80
Fittings (not to scale)
QuantityCode
1C
Item
Allen Key (4mm)
A
B
C
General Hints & Tips

For this step:
MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Batch No. 020517
Page 5of 6
STEP 1
Tools required
Fittings required
STEP 2
For this step:
Tools required
AB
A x8
C
B x8
Fittings required
A x8
C
B x8
1
2
2
2
2
3
4
4
4
4

MARIANNE NEST OF TABLES ASSEMBLY INSTRUCTIONS
Batch No. 020517
Page 6of 6
Assembly Completed
Your Marianne Nest of Tables is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference