GFW CAVENDISH LOW 2 DOOR STORAGE UNIT User manual

Batch No.WMI 17001(PO#2654)
Page 1 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the CAVENDISH LOW 2 DOOR STORAGE UNIT. Please read the
instructions carefully to ensure safe operation of the product.
Size: W71.6 x D34 x H33.5cm
COLOUR: WHITE
1 Hour
Set Up

Batch No.WMI 17001(PO#2654)
Page 2 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
INFORMATION
WARNINGS
DO NOT use power tools to construct this product.
DO NOT tighten screws until fully assembled.
DO NOT over tighten screws or bolts.
DO NOT use this product if parts are missing, damaged or worn.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean wipe with a sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product
This product is intended for a maximum weight of 100kg.
Due to the size of this product we recommend that it is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a clean
floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly.
Tools are not included.
This product should only be used on firm, level ground.
DO make sure the legs remain in contact with the ground.
DO keep small parts out of reach of children.

Batch No.WMI 17001(PO#2654)
Page 3 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
Please check the pack contents before assembling this product. If any components are missing,
please contact your retailer.The fittings pack contains small items that should be kept away from
small children.

1234
5678
9 10 11 12
13 14
Batch No.WMI 17001(PO#2654)
Page 4 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
DESCRIPTION: RIGHT SIDE PANEL
QTY: 1 PC
DIMENSIONS: 325x281x12MM
DESCRIPTION: LEFT SIDE PANEL
QTY: 1 PC
DIMENSIONS: 325x281x12MM
DESCRIPTION: BOTTOM PANEL
QTY: 1 PC
DIMENSIONS: 665x325x12MM
DESCRIPTION: BOTTOM SUPPORT PANEL
QTY: 1 PC
DIMENSIONS: 200x56x12MM
DESCRIPTION: FRONT BOTTOM PANEL
QTY: 1 PC
DIMENSIONS: 665x56x12MM
DESCRIPTION: MIDDLE UPPER PANEL
QTY: 1 PC
DIMENSIONS: 308x211x12MM
DESCRIPTION: BACK PANEL
QTY: 1 PC
DIMENSIONS: 674x220x3MM
DESCRIPTION: TOP LEFT SIDE PANEL
QTY: 1 PC
DIMENSIONS: 325x40x12MM
DESCRIPTION: TOP RIGHT SIDE PANEL
QTY: 1 PC
DIMENSIONS: 325x40x12MM
DESCRIPTION: TOP BACK PANEL
QTY: 1 PC
DIMENSIONS: 665x40x12MM
DESCRIPTION: TOP PANEL
QTY: 1 PC
DIMENSIONS: 716x340x12MM
DESCRIPTION: RIGHT DOOR PANEL
QTY: 1 PC
DIMENSIONS: 321x218x15MM
DESCRIPTION: LEFT DOOR PANEL
QTY: 1 PC
DIMENSIONS: 321x218x15MM
DESCRIPTION: CUSHION
QTY: 1 PC
DIMENSIONS: 1004x327x40MM

If you keep the fittings in a bowl during assembly you will be less likely to lose them!
Batch No.WMI 17001(PO#2654)
Page 5 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
Ref Dimensions Qty
A
B
WOOD DOWEL
(8X30MM)
CAM BOLT
(6x35mm) 12
12
10
C
CAM LOCK
(15x10mm)
D26
SCREWS
(4x40mm)
ESCREWS
(3x12mm) 6
G
H4
MAGNETIC CATCH 2
METAL PLATE 2
SHELF SUPPORT
(4x9mm)
F
NOT TO SCALE
FIXINGS (TO SCALE)

Batch No.WMI 17001(PO#2654)
Page 6 of 14
Layout all part on a soft surface i.e. Rug,carpet or packaging carton
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
Layout Parts on Soft Surface

Batch No.WMI 17001(PO#2654)
Page7 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
C
C
3
4
3: BOTTOM PANEL x 1
4: BOTTOM SUPPORT
PANEL x 1
C: SCREWS x 2
3: BOTTOM PANEL x 1
5: FRONT BOTTOM
PANEL x 1
A: CAM BOLT x 2
B: CAM LOCK x 2
A
B
3
5
3
A
B
B
A
STEP 1

Batch No.WMI 17001(PO#2654)
Page 8 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
6: MIDDLE UPPER
PANEL x 1
C: SCREWS x 2
D: WOOD DOWEL x 2
C
D6
C
D
1: RIGHT SIDE
PANEL x 1
2: LEFT SIDE PANEL x 1
A: CAM BOLT x 4
1
2
A
A
A
A

Batch No.WMI 17001(PO#2654)
Page 9 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
1: RIGHT SIDE
PANEL x 1
2: LEFT SIDE PANEL x 1
B: CAM LOCK x 4
D: WOOD DOWEL x 8
x2
x2
B
D
1
2
D
D
B
D
B
B
B
B
D
D
D
D
D
D
D
7: BACK PANEL x 1
7
D

7
Batch No.WMI 17001(PO#2654)
Page 10 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
12: RIGHT DOOR
PANEL x 1
13: LEFT DOOR
PANEL x 1
E: SCREWS x 2
G: METAL PLATE x 2
E
G12
13
E
G
12: RIGHT DOOR
PANEL x 1
13: LEFT DOOR
PANEL x 1
H: SHELF SUPPORT x 2
H
12
13
H
STEP 8

Batch No.WMI 17001(PO#2654)
Page 11 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
8: TOP LEFT SIDE
PANEL x 1
9: TOP RIGHT SIDE
PANEL x 1
10: TOP BACK PANEL x 1
D: WOOD DOWEL x 4
D
8
9
10
D
D
D
8: TOP LEFT SIDE
PANEL x 1
9: TOP RIGHT SIDE
PANEL x 1
10: TOP BACK PANEL x 1
11: TOP PANEL x 1
C:SCREWS x 6
D: WOOD DOWEL x 6
STEP 9
STEP 10
C
D
8
9
10
11
D
D
DC
C
C
C
C

Batch No.WMI 17001(PO#2654)
Page 12 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
11: TOP PANEL x 1
A: CAM BOLT x 6
E: SCREW x 4
F: MAGNETIC CATCH x2
A
E
F
11
EEE
A
A
A
A
A
11: TOP PANEL x 1
B: CAM LOCK x 6
D: WOODEN DOWEL x 6
H: SHELF SUPPORT x 2
STEP 11
STEP 12
11
B
D
H
H
B
BHDD

Batch No.WMI 17001(PO#2654)
Page 13 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
14
14: CUSHION x 1
STEP 13

Complete Assembly
Batch No.WMI 17001(PO#2654)
Page 14 of 14
CAVENDISH LOW 2 DOOR STORAGE UNIT
ASSEMBLY INSTRUCTIONS
Your is now completely assembled.
Periodically check to ensure that the components are in their proper
position, free from damage.
Also, make sure the connectors are tight and secure.
CAVENDISH LOW 2 DOOR STORAGE UNIT