GFW HATTIE User manual

Batch No.: WMI16017
Page 1 of 9
Thank you for purchasing the HATTIE DRESSING TABLE SET. Please read the
carefully to ensure safe of the product.
W1090 x D470 x H1290mm
COLOUR: BLACK, WHITE, GREY
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of co on.
Carefully open the pack supplied and check the contents against the parts and check list. Do not destroy any of the
packaging you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the constr of this unit. These loose items should be kept away from young
children whilst assembling your unit to avoid the danger of choking hazards.
Tools Required:
x 2
HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS

HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
INFORMATION
•Due to the size of this product we recommend that it is assembled in the room intended for use.
•When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area
for assembly.
•Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to
prevent it from scratching.
•Check the pack and make sure you have all the parts listed.
•Ensure that this product is fully assembled as illustrated before use.
•Check all screws or bolts are ghtened and inspect regularly
•Tools are not included.
WARNINGS
•This product should only be used on firm, level ground.
•Keep small parts out of reach of children.
•Make sure the legs remain in contact with the ground.
•Do not use power tools to construct this product.
•Do not ghten screws l fully assembled.
•Do not over en screws or bolts.
•Do not use this product if parts are missing, damaged or worn.
•Do not sit or stand on the dresser.
•If a mirror component is chipped or broken, stop using the product and consult the manufacturer or supplier
•Do not lean on the cal mirror surface
•Do not strike the mirror with hard or pointed items.
CARE INFORMATION
•Never use scourers, abrasives or chemical cleaners.
•To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
•When cleaning glass panels or mirrors use a damp cloth with washing up liquid or soap if necessary; do
not use washing powders or any other substances containing abrasives since these substances scratch glass.
Batch No.: WMI16017
Page 2 of 9

HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
3
4
7
7
7
7
6
Batch No.: WMI16017
Page 3 of 9

HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Parts and Checklist
Please check the pack contents before assembling this product. If any components are missing, please contact your
retailer.
The fings pack contains small items that should be kept away from small children.
Parts (Dresser)
1. DRESSER TOP – 1 Piece 2. DRESSER LEG – 4Pieces 3. MIRROR BASE – 1 Piece
4.MIRROR SUPPORT –
2Pieces
5. MIRROR– 1 Piece
Fittings (Dresser)
CAUTION: There are many small components used in the construction of this product.
Please keep these components away from young children whilst assembling this product.
If you keep the fittings in a bowl during assembly you will be less likely to lose them!
10 mm
20 mm
30 mm
40 mm
50 mm
60 mm
70 mm
80 mm
90 mm
F lx ln g (to s ca le)
D im en s lon sR ef Q ty
A
B
C
D
( Not to s ca le)
L AR G E B O L T
M6x5 0mm
S U PP OR T B O L T
M8x4 5mm
2
8
2
AL L E N K E Y M 4
8
1
WAS H E R
8x1 9x1 . 5 mm
E
S M AL L B O L T
M6x3 5mm
100 mm
Batch No.: WMI16017
Page 4 of 9

HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Layout Parts on Soft Surface
Lay out all parts on a soft surface i.e. Rug, Carpet or Packaging Carton to avoid damage.
Batch No.: WMI16017
Page 5 of 9

Parts Required
STEP 1
1 . Dresser Top x 1
2 . Dresser Legs x 4
B . Large Bolt x 8
D . Washers x 8
E . Allen Key
D
x4
Parts Required
STEP 2
4 . Mirror Support
x 2
5 . Mirror x 1
A . Support Bolt x 2
Batch No.: WMI16017
Page 6 of 9
HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS

Parts Required
STEP 3
Complete Assembly
4 . Mirror Support
x 2
5 . Mirror x 1
C . Small Bolt x 2
3 . Mirror Base x 1
E . Allen Key
HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Batch No.: WMI16017
Page 7 of 9

(Stool)
6. SEAT – 1 Piece 7. LEG – 4 Pieces
(Stool)
STEP 1 Parts Required
6. SEAT x1
7. LEGS x4
B.LARGE BOLT x8
D.WASHER x8
E.ALLEN KEY
B
D
E
6
7
7
7
7
D
B
E
10 mm
20 mm
30 mm
40 mm
50 mm
60 mm
70 mm
80 mm 90 mm
F lx ln g (to s ca le)
D im en s lon sR ef Q ty
B
D
( Not to s c ale)
8
AL L E N K E Y M 4
8
WAS H E R
8x1 9 x1.5m m
E
100 mm
L AR G E B O L T
M6 x50
x4
HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Batch No.: WMI16017
Page 8 of 9

Complete Assembly
Your HATTIE DRESSING TABLE SET is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference
HATTIE DRESSING TABLE SET
ASSEMBLY INSTRUCTIONS
Batch No.: WMI16017
Page 9 of 9