GGM gastro Smooth EBK46-E User manual

INSTRUCTION & OPERATIONAL MANUAL
1
Commercial Electric Griddle
EBK46-E EBGK46-E
EBK66-E EBGK66-E
Instruction Manual
Thank you for choosing our products. Please read the manual
instruction carefully before using the equipment and use only as
specified.
Attention Owners and Operators
This equipment is designed to provide safe and productive
processing, cooking and warming of food products as long as the
equipment is used in accordance with the instructions in this manual
and is properly maintained. Owners of this equipment bear the
responsibility to make certain that this equipment is used properly

INSTRUCTION & OPERATIONAL MANUAL
2
and safety, and to strictly follow all of the instructions contained in
this manual and the requirements of local, state or federal law.
Warning
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before installing
or servicing this equipment.
1. Parameters
2. Installation Requirement:
Please put this equipment on a flat place, and far away from
combustible elements.
Please install proper power switch, fuse and power leakage
protector near the equipment.
The voltage supplied must be consistent with the information in
the parameter part above.
Description
Dimensions
Model
Voltage/
Frequency
Power
Electric Griddle - Smooth
400*600*420MM
EBK46-E
380-415V/50HZ
4.5KW
Electric Griddle –Grooved
400*600*420MM
EBGK46-E
380-415V/50HZ
4.5KW
Electric Griddle - Smooth
600*600*420MM
EBK66-E
380-415V/50HZ
9 KW
Electric Griddle –Smooth &
Grooved
600*600*420MM
EBGK66-E
380-415V/50HZ
9 KW

INSTRUCTION & OPERATIONAL MANUAL
3
This equipment is connected with fixed wiring, according to the
wiring rules and it is equipped with all extremely disconnect
switch.
Repairs should only be performed by qualified technicians to
ensure safety. Repairs and other work by unqualified persons
could be dangerous. Remove switch components, and the power
cord (internal line), the light bulb unit etc, must first stop using;
laypeople may not arbitrarily dismantle and modification.
3. Operation Instruction
3.1Connect the power supply and green power indication lamp will
be on.
3.2 Clock-wisely turn the knob to control the griddle temperature.
Please turn the knob to the temperature you need and the yellow
heating indication lamp will be on. The heating element is working.
When the temperature is reached what we need, then the thermostat
will automatically disconnect the heating element, and the yellow
lamp will be off. The heating element will stop working. When the
temperature is lower than what we need, the thermostat will
automatically connect the heating element and it will restart to work
again and the yellow heating indication light will be on. Again and
again, the griddle will keep in a certain temperature.
3.3 After use, please turn off the switch and disconnect the power.

INSTRUCTION & OPERATIONAL MANUAL
4
3.4 Please do not touch the griddle and product surface during usage.
3.5 Please do not use corrosive water or detergent to clean the
equipment.
4. Daily Checking
Check the appliance before and after use. Before using, make sure
the appliance dose not lean. Be certain that the power cord is not
worn out or broken. When in use, make sure no unpleasant smell is
present and there is no any unusual noise.
Important: Do not discard this manual
This manual is considered to be part of the appliance and is to be
given to the owner or manager of the hotel or restaurant, or to the
person responsible for training operators of this appliance. It should
be retained for future reference. Additional manuals are available
from your local dealer.