Gianni Industries EB-200N User manual

Statement
Dimension
Specifications
EB-200N ELECTRIC DROPBOLT
EB-200N
EB-200NVGL
EB-200N-32EB-200N-38
Unit: mm
203
183
28
32
(38)
41
42
225
Ø30
100
25
100
25
25
80
Fail-Safe Version (Power to Lock)
Operating Voltage: 12 V DC
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A/12VDC
(at temperature 20°C)
Door Position status output (Reed rated 0.25A/30VDC)
indicates door opened or closed status.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Tested to 500000 cycles.
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Net Weight: 1.2 Kg
The EB-200N electric dropbolt is one of
the most economical choices and it also
has a complete optional accessories
included. The EB-200N electric dropbolts
are available in 32 mm and 38 mm wide
faceplates. For the surface mount
application, it can be used with SMB-
200N surface mount back case. Also,
after the door installs with the UBK-200N-
Pull in
Holding
Current Draw (mA)
Time (seconds)
0 seconds 3 seconds 6 seconds 9 seconds
Relock Time Delay
1
4
56
66
205
Energy Saving Design
Adjustable Time Delay of 0,3,6,9 seconds with 2 way DIP
switch. (Default Value: 0 sec.)
Relock Time Delay
GIANNI INDUSTRIES, INC.
After the dropbolt is completely locked , the current draw
changes from 0.9A into 0.3A to prolong its lifetime.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-200N Ver. F Published on 2011.07.12 No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

Horizontal or vertical installation
Horizontal Installation
(Frame Header)
Sensor
EB-200N ELECTRIC DROPBOLT
Solid bolt for superior strength
Greater security is provided by the 13.5mm diameter (
solid stainless steel bolt with hardened magnet
core, which has resistant to metal cutting saws. The bolt also
rotates freely, making attempts to tamper or cut extremely
difficult.
16mm
bolt throw)
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
The KR-140 Key switch is also available to be installed
together with Electric Dropbolt Locks, which provide the
emerge ncy manual re lease capa bility to prevent any
unpredictable circumstances that disabled the Electric
Dropbolt Locks.
Optional Accessory
Optional Brackets
UBK-200N-38
(U-bracket )
EB-200NVGL
SMB-200N
(Completed housing )
The unit may also be fitted semi-flush with the use of the
SMB-200N completed housing. Or the EB-200N may also be
fitted to a full glass door and glass frame application, using
2pcs of the SMB-200 Bracket and 2pcs of the UBK-200N-38
mounting brackets (EB-200NVGL). The thickness of glass are
10~13 mm maximum.
Surface Installation
Installation on Full Frameless Glass Door
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Long life solenoids
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
(Cylinder is excluded)
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-200N Ver. F Published on 2011.07.12