Gianni Industries EB-220-32 User manual

Statement
Dimension
Specifications
Double Acting Doors
EB-220 Electric Dropbolt
EB-220-32 EB-220-38
Fail-Safe Version (Power to Lock)
Operating Voltage: 12 VDC
Voltage Tolerance: 10%
Current Draw:
Pull in: 0.9A, Holding: 0.3A/12V DC
(at temperature 20°C)
Magnetic bolt status output (SPDT rated 3A/30VDC)
indicates bolt locked or unlocked status.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20°C
Tested to 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9seconds
Face Plate Material: stainless steel
Net Weight: 1.0 Kg
double action door inswing Outswing
38
200
220
180
41
26
140
Unit: mm
The EB-220 electric dropbolt s are available in
32mm and 38mm wide faceplates. In this design
the EB-220 electric dropbolt comes from the same
logic circuit , this lock is the downsize version of
EB-262 (without position ball ).
Smart Circuitry
The vandal resistant circuitry means the door close sensor
can't be fooled into projecting the electric dropbolt unless the
door is actually closed. The reed sensor automatically
disconnects after the bolt is projected to enhance security of
the lock.
Auto-detective circuitry
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted whilst the door is unlocked
until the door is properly closed. This feature ensures the bolt
will not extend if the door is improperly aligned.
EB-220 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both out
and in-swinging doors.
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-220 Ver. E Published on 2008.10.20
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

0 seconds 3 seconds 6 seconds 9 seconds
Relock time setting
45
5 mm maxi
Reed
The brackets UBK-262 are compatible with frameless
glasses doors(Fig. C).
Fig. C
UBK-262 Bracket
For 10 or 12 mm thickness of glass
EB-220 Electric Dropbolt
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Horizontal or vertical installation Long life solenoids
Adjustable Sensor Optional Accessory
Special designed solenoid for strength and long life
operating lifetime with guaranteed 500,000 operations.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Fig. A Horizontal Installation (Frame Header)
Fig. B Vertical Installation (Side Jamb)
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
The door close sensor can work up to a range of 5mm. If
there is a wide door gap, a sensor magnet within the strike
plate of the door can be adjusted to improve sensor accuracy.
Energy Saving Design
After the dropbolt is completely locked , the current draw
changes from 0.9A into 0.3A to prolong its lifetime.
Adjustable Time Delay of 0,3,6,9 seconds with 2 way DIP
switch. (Default Value: 0 sec.)
Relock Time Delay
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-220 Ver. E Published on 2008.10.20
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw