Gianni Industries EB-195 User manual

Statement
Dimensions
Specification
DPS & BSS output
EB190, EB195
ELECTRIC DROPBOLT
Fail-Safe Version (Power to Lock)
Operating Voltage: 12 /24VDC (self-regulating)
Voltage Tolerance: ±10%
Current Draw: Pull in: 0.9A/12VDC; 0.45A/24VDC
Holding: 0.15A/12VDC; 0.1A/24VDC
(at 20°C)
BSS output:Magnetic bolt status output (SPDT rated
3A/30VDC) indicates bolt locked or unlocked status.
DPS output: Indicates door position (open or closed),
Reed rated 0.25A/30VDC.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Tested over 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9 seconds
Faceplate Material: stainless steel
Net Weight: 0.6 Kg
Unit: mm
149
41
185
115
90
210
25
Sensor
+
-
N.O.
N.C.
COM.
COM.
N.C.
N.O.
Door Position Status
output: Indicating door
position (open or
closed),Reed rated
0.25A/30VDC.
Bolt Status Switch
sensor output:
Indicating bolt status
(Locked or Unlocked)
SPDT rating:
3A/30VDC
The EB190 electric dropbolt is the upgraded
version of EB180. The 25mm-wide faceplate is
designed for installation on virtually all types of
doors and frames. The bolt status switch sensor
and door position status sensor have been added
to the lock. The rectangular-shaped (EB195) and
arc-shaped (EB190) faceplates are used to suit
the different users' habits of installations.
EB190
EB195
Double Action Doors
EB190 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both
outswing and inswing doors.
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-190 Ver. F Published on 2011.06.22
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

The specially designed solenoid aims for strength and long
life. The solenoid is guaranteed 500,000 times of operations.
Long life solenoids Auto-detective circuitry
Horizontal or vertical installation
Pull in
Holding
Current Draw (mA)
Time (seconds)
Breakthrough in innovation ideas
Unobtrusive and slim design can be flush mounted directly
into metal such as door mullions.
0 seconds 3 seconds 6 seconds 9 seconds
Relock time setting
Auto-detective circuitry
Fig. A
Fig. B
Horizontal Installation
(Frame Header)
Vertical Installation
(Side Jamb)
Vandal resistant
circuit design
Sensor
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Vandal Resistant Circuitry
The vandal resistant circuitry means the door sensor can't
be fooled into projecting the electric dropbolt unless the door
is actually closed. The reed sensor automatically disconnects
after the bolt is projected to enhance security of the lock.
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted until the door is properly
closed. This feature ensures the bolt will not extend if the door
is improperly aligned.
Energy Saving Design
After the dropbolt is completely locked , the current draw
changes from 0.9A to 0.15A to prolong its life.
Adjustable Time Delay of 0,3,6,9 seconds with 2 way DIP
switch. (Default Value: 0 sec.)
Relock Time Delay
GIANNI INDUSTRIES, INC.
EB190, EB195
ELECTRIC DROPBOLT
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-190 Ver. F Published on 2011.06.22 No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw