Gianni Industries EM-NH350 User manual

EM-NH350
Midi Electromagnetic Lock
Statement
EM-NH350 is designed for surface mount on
out-swing doors. Its slide-in mounting plate
simplifies the process of installation and firmly
secures the magnet. EM-NH350M comes with
magnetic bond sensor indicating locked and
unlocked status.
Specification
Operating Voltage: 12/24 VDC
Current Draw: 500mA/12VDC;250mA/24VDC
(at 20ºC)
Operating Temperature: -10~55ºC (14~131ºF)
Humidity: 0~95% non-condensing.
Holding Force: Up to 800 lbs (363 Kg)
Dimensions:
Magnet:(L) 265, (W) 52, (D) 29 mm
Armature Plate:(L) 185, (W) 45, (D) 14 mm
Mounting Plate:(L) 265, (W) 29, (D) 6.5 mm
Finishes for magnet and armature plate: Zinc plated
Epoxy Potting Compound: E87252 (S), UL94V-0
Net Weight: 3.0 Kg
Patent:
ZL 2006 2 0122522.X
Nr.20 2006 012 052.1
M308308
GB 06 16099.8
06 07229 (France)
GIANNI INDUSTRIES, INC.
Special Mounting Plate design
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EM-NH350 Ver. G Published on 2011.09.01
Features
Holding force up to 800lbs
MOV provides spike and surge protection
Aluminum anodized casing
Mounting plate & housing for easy installation
Dual voltage 12 or 24 VDC (selectable)
Anti-Residual magnetism function
Cable
1 . P a s s t h e p o w e r c a b l e
through the mounting plate
and the hole of the maglock.
4.Use the Allen wrench and
fixing screws to tighten the
mounting plate and maglock.
2.Place the mounting plate
above the maglock. Leave a
length of 1 cm from either end
of the maglock.
3.Slide the mounting plate
into the maglocks. Fit the
maglock from the bottom to
the mounting plate.
Regular Installation
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
years from the date of sale to the original client. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

Magnet
Armature
Door Frame
Door
Leaf
A
Outswing
Optional Brackets
L-bracket for narrow door frames
When < 48 mm ,must
install with "L" brackets.
"A"
L-NH350M
LZ-bracket for inswing doors
U-bracket for frameless glass doors
UBK-013 For 10~12mm thickness of glass door
LZ-NH-350N
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EM-NH350 Ver. G Published on 2011.09.01
EM-NH350
Midi Electromagnetic Lock
GIANNI INDUSTRIES, INC.
Operating Features
48 mm
Bracket installation is according to door swing
direction and door frame type , e.g. narrow frame
door , frameless glass door , inswing door , etc.
UBK-013
xxxxx-TD: Relock time delay
Ensure the automatic lock mode after
the door is closed properly and it can
be adjusted from 1 to 80 seconds.
xxxxx-M: Bond sensor output
Indicate the locked & unlocked status with
visible LED indicator.
Bond sensor output
SPDT rated: 0.5A/125VAC;1A/24VDC
Timer Adjust
Shorten
Trigger
: Door status xxxxx-DS
Door Status Sensor indicates the door
is in an open or closed status.
Door status output
SPDT rated: 0.2A/12VDC
Anti-residual statement
Magnet Armature
(Power Off)
Magnet Armature
(Power On)
Anti-residual statement
Our electromagnet locks feature Anti-Residual Magnetism
(ARM) which ensures the door can be opened without any
resistance from left over magnetism imparted to the armature
plate
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw