PROFESSIONAL MEDICAL PRODUCTS
Gima S.p.A. –Via Marconi, 1 –20060 Gessate (MI) Italy
Italia: tel. 199 400 401 –fax. 199 400 403
Export: tel. +39 02 953854209/221/225 –fax. +39 02 95380056
www.gimaitaly.com
BUBBLE MATTRESS
USER MANUAL
Brief
The BUBBLE MATTRESS consists of two parts: the mattress and the pump. The pump utilizes a
small compressor to remain quiet and energy efficient. The control panel is simple and very user
friendly. The mattress relieves pressure by sequentially deflating and inflating alternate air cells on
approximately 6 minutes timed intervals. It is widely recognized that constant pressure to a bony
prominence is the leading cause of skin breakdown. The continuous movement supplied by the unit
lessens the areas of constant pressure and enhances circulation.
Operation
1.
Place the mattress on the bed frame with the hose end at the foot section of the bed frame.
2.
Using the integrated hooks, securely hang the pump on the bed end at the foot end or place on a
smooth flat surface.
3.
Connect the air hoses from the mattress to the pump.
4.
Plug the pump into a wall outlet. Be sure the power cord is safely away from possible hazards.
5.
Turn on the power switch on the control panel of the pump. The pump will begin to inflate the
mattress.
6.
After inflation, adjust the mattress using the dial on the pump.
Caution
1.
Do not smoke on or near the pump.
2.
Keep the pump away from heated surfaces.
3.
Explosion risk if used in the presence of flammableanesthetics.
4.
Replace fuse as marked: T1A 250V. Power Input: ～220V 50Hz, 0.1A
