GIRBAU HS-5008 User manual

Cod. 411579
Rev. 02/0704
Advanced Operation Instructions
for Washers HS-5008 / H5020
LOGI CONTROL
GIRBAU, S.A.
Crta de Manlleu, km. 1
08500 VIC (Barcelona) •SPAIN
Tel. [phone]
Fax [phone]
[email protected]
www.girbau.com
Advanced LOGI
HS-5008
H5020
Rev. 02
Model From Serial #
HS-5008 886.068
H5020 1.340.001
For USA & CANADA:
CONTINENTAL GIRBAU Inc.
2500 State Road 44
WI 54904 Oshkosh •USA
Tel. [phone]
Fax [phone]
[email protected]
www.cont-girbau.com

Index
Cod. 411579
Rev. 02/0704
2
SAFETY INSTRUCTIONS
INDEX ..................................................................2
1. OPERATING INSTRUCTIONS
1.1. Control panel
1.2. Loading the washing machine
1.3. Using the dispenser
1.4. Starting a program
1.5. Modifying a program in progress
1.6. Wash programs
1.7. Stop modes
1.7.1. End of cycle
1.7.2. Interrupting a program
1.8. Unbalance control
1.9. The delay option
1.9.1. Delaying a program
2. ADVANCED USE MODE.
2.1 Access to MODIFICATION mode ................3
2.2. Modification of program contents. Pro menu 3
2.2.1 Master program ................................ 3
2.2.2 Default program contents. Non USA /
CANADA application ................................... 4
2.2.3 Default program contents. USA /
CANADA application ................................... 5
2.2.4 Default program contents. Great
Britain application ........................................ 6
2.2.5 Phases definition .............................. 7
2.2.6 Definition of programmable functions
and values for each phase ........................... 8
2.2.7 Modification of a program .................. 9
2.3. Information menu. Info menu ..................... 10
2.4. Modification of operating parameters. Mod
menu ......................................................... 10
2.4.1 Parameters modification ................. 11
2.5. Modification of the access code.
Ncod menu ................................................. 12
2.6. Clock of the system. Hour Menu ............... 12
2.6.1 To set the clock ................................ 12
3. TROUBLESHOOTING
3.1. What to do when
3.2. System alarms
4. MAINTENANCE
4.1. Operations described
4.2. Cleaning the washing machine
4.3. Cleaning the door seal
4.4. Cleaning the electro valve filters
4.5. Cleaning the dispenser
4.6. Cleaning the drain pump
4.7. General overhaul
5. SERVICE REMOVAL
5.1. Dismantling
ANNEX 1
Default program contents. USA / CANADA
application. 20-29 versions
NOTE
For the contents of SAFETY INSTRUCTIONS, chapter
1. OPERATING INSTRUCTIONS, 3. TOUBLE-
SHOOTING, 4. MAINTENANCE and 5. SERVICE
REMOVAL, refer to the Operation Instructions for
Washers HS-5008 / H5020 LOGI CONTROL ver. 2
(code 410746) supplied with the washer or request it to
the manufacturer at [e-mail]
HANDBOOK APPLICATION
The operation instructions on this handbook are
applicable to machines with program 30 version and
above. (Refer to INFO menu, Section 2.3)
For USA / CANADA default program contents,
20-29 versions, refer to Annex 1 at the end of this
Instructions handbook.

Advanced Mode
Cod. 411579
Rev. 02/0704
3
2. ADVANCED USE MODE
There is an advanced use mode: the MOD mode. This
mode includes five different menus through which each
user can personalise the operation of the washing
machine.
Menus for advanced use mode:
MENU PURPOSE
Pro Modification of the program contents
INFO Information menu
Mod Modification of operation parameters
Ncod Modification of the access code
HOUR Adjustment of the system time
2.1. Access to MODIFICATION mode
Connect the washer and open the door. The display
shows door.
Hold MOD key until the display shows Cod.
Enter the access code to the menus pressing, without
interruption, the sequence of eight keys of the code. In
basic configuration (when the machine is delivered) the
access code to MODIFICATION mode is: 12341234.
Numerical correspondence of each key
KEY CORRESPONDENCE
MOD 1
V2
ACCEL 3
W4
If the sequence set is correct, report Pro will be
showed in the display, corresponding to the first menu.
Keys V/Wallow the selection of the precedent table
menus. The menu selected is showed in the display
following its key word. To enter in it, press the MOD
key when displaying it.
If wished to skip the MODIFICATION mode, press
STOP and machine will return to programs execution
mode.
Disconnecting the electrical supply to the washing
machine can also exit the MODIFICATION mode.
2.2. Modification of programs
contents. Pro menu
In its original configuration, the washing machine has
eight wash programs with content adapted to a wide
range of usage. However, the content of each program
can be modified to be adapted to the specific needs of
different situations.
The modifications will always be carried out starting
from a MASTER PROGRAM that understands the
programmable parameters and the maximum and
minimum values of certain options.
The master program is composed of nine phases. At
the start of each phase, a parameter of the value PH-Y /
Ph-N (execute YES phase / execute NO phase) will
allow the user to determine if the accessed phase
should be executed or, on the contrary, be omitted.
Once the phase is defined as to be executed, proceed to
the display and modification (if desired) of the
parameters or values of the phase.
2.2.1. Master program
EXECUTION LEVEL TEMP. DOSING ROTATION ROTATION
TIME COOL DOWN PAUSE EXTRACT EXTRACT TIME
PHASE Ph L C / F d r rt c rh E Et
1 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1 n.p.
2 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1 n.p.
3 Y / N 1…4 0 ... 40
32 ... 104 0 / 1 1...3 1...8 n.p. n.p. 1...3 n.p. 2...4
4 Y 1…4
0 ... 80
32 ... 176 2 1...3 1...20 0 / 1 n.p. 0...2 n.p. 2...3
5 Y / N 1…4 0 ... 40
32 ... 104 0 / 3 1...3 1...8 n.p. n.p. 1...3 n.p. 2...4
6 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
7 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
8 Y / N 1…4 n.p. n.p. 1...3 1...8 n.p. n.p. 1 n.p.
9 Y 1…4
0 ... 40
32 ... 104 0 / 4 1...3 1...8 n.p. 0 / 1 1...4 2...9
Refer to section 2.2.5 for the definition of functions and programmable values of each phase.

Advanced Mode
Cod. 411579
Rev. 02/0704
4
2.2.2. Default programs contents. General application (non USA / CANADA)
PR- 1. EXTRA HEAVY SOIL -WHITE 65 MIN PR -2. HEAVY SOIL –WHITE 59 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 Y 2 40 1 1 4 - - - - - - 1 - - - 1 Y 2 40 0 1 4 - - - - - - 1 - - -
2 Y 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 40 1 1 6 - - - - - - 3 3 3 Y 2 40 1 1 6 - - - - - - 3 3
4 Y 1 60 2 1 12 0 - - - 2 2 4 Y 1 60 2 1 10 0 - - - 2 2
5 Y 2 40 3 1 6 - - - - - - 3 3 5 Y 2 40 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 4 7 9 Y 2 0 4 1 4 - - - 0 4 7
PR -3. MEDIUM SOIL –WHITE 51 MIN PR -4. LIGHT SOIL –WHITE 37MIN
Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 30 0 1 4 - - - - - - 1 - - - 1 N 2 30 0 1 4 - - - - - - 1 - - -
2 N 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 40 1 1 6 - - - - - - 3 3 3 N 2 30 1 1 6 - - - - - - 3 3
4 Y 1 50 2 1 8 0 - - - 2 2 4 Y 1 40 2 1 6 1 - - - 0 - - -
5 Y 2 30 3 1 6 - - - - - - 3 3 5 Y 2 30 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 4 7 9 Y 2 0 4 1 4 - - - 0 4 7
PR - 5. HEAVY SOIL –COLOR 51 MIN PR- 6. MEDIUM SOIL –COLOR 40 MIN
Ph Ph L C d r rt cd rh E Et Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 0 2 4 - - - - - - 1 - - - 1 N 2 30 0 2 4 - - - - - - 1 - - -
2 Y 2 0 0 2 4 - - - - - - 1 - - - 2 N 2 0 0 2 2 - - - - - - 1 - - -
3 Y 2 40 1 2 6 - - - - - - 3 3 3 Y 2 40 1 2 4 - - - - - - 2 2
4 Y 1 40 2 1 10 0 - - - 2 2 4 Y 1 40 2 1 8 0 - - - 2 2
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 2 2 - - - - - - 3 3
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 2 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 2 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 2 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 4 7 9 Y 2 0 4 2 4 - - - 0 4 7
PR- 7. SYNTHETICS 30 MIN PR -8. WOOL AND DELICATES 32 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 3 30 0 2 4 - - - - - - 1 - - - 1 N 3 0 0 3 4 - - - - - - 1 - - -
2 N 3 0 0 2 2 - - - - - - 1 - - - 2 N 3 0 0 3 2 - - - - - - 1 - - -
3 N 2 40 1 2 4 - - - - - - 2 2 3 Y 3 0 1 3 4 - - - - - - 1 - - -
4 Y 1 40 2 2 6 0 - - - 2 2 4 Y 2 30 2 2 8 1 - - - 1 - - -
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 3 2 - - - - - - 1 - - -
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 3 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 3 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 3 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 4 6 9 Y 3 0 4 3 4 - - - 0 3 3

Advanced Mode
Cod. 411579
Rev. 02/0704
5
2.2.3. Default program contents. USA / CANADA application. 30 and above versions.
PR- 1. EXTRA HEAVY SOIL -WHITE 27 MIN PR -2. HEAVY SOIL –WHITE 22 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 1 1 4 - - - - - - 1 - - - 1 N 2 104 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 N 2 104 1 1 6 - - - - - - 3 3 3 N 2 104 1 1 6 - - - - - - 3 3
4 Y 1 113 2 1 9 0 - - - 1 - - - 4 Y 1 104 2 1 6 0 - - - 1 - - -
5 Y 2 32 3 1 2 - - - - - - 3 2 5 Y 2 32 3 1 3 - - - - - - 3 2
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 Y 2 - - - - - 1 1 - - - - - - 1 - - - 8 N 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 2 - - - 0 4 5 9 Y 2 32 4 1 2 - - - 0 4 5
PR -3. MEDIUM SOIL –WHITE 22 MIN PR -4. LIGHT SOIL –WHITE 20MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 2 86 0 1 4 - - - - - - 1 - - - 1 N 2 86 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 N 2 104 1 1 6 - - - - - - 3 3 3 N 2 86 1 1 6 - - - - - - 3 3
4 Y 1 86 2 1 6 0 - - - 1 - - - 4 Y 1 68 2 1 4 1 - - - 1 - - -
5 Y 2 32 3 1 3 - - - - - - 3 2 5 Y 2 32 3 1 3 - - - - - - 3 2
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 N 3 - - - - - 1 1 - - - - - - 1 - - - 8 N 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 2 - - - 0 4 5 9 Y 2 32 4 1 2 - - - 0 4 5
PR - 5. HEAVY SOIL –COLOR 22 MIN PR- 6. MEDIUM SOIL –COLOR 21 MIN
Ph Ph L F d r rt cd rh E Et Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 0 2 4 - - - - - - 1 - - - 1 N 2 86 0 2 4 - - - - - - 1 - - -
2 N 2 32 0 2 4 - - - - - - 1 - - - 2 N 2 32 0 2 2 - - - - - - 1 - - -
3 N 2 104 1 2 6 - - - - - - 3 3 3 N 2 104 1 2 4 - - - - - - 2 2
4 Y 1 104 2 1 8 0 - - - 1 - - - 4 Y 1 104 2 1 6 0 - - - 1 - - -
5 Y 2 32 0 2 1 - - - - - - 3 2 5 Y 2 32 0 2 1 - - - - - - 3 2
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 2 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 2 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 2 1 - - - - - - 1 - - -
9 Y 2 32 4 2 2 - - - 0 4 5 9 Y 2 32 4 2 3 - - - 0 4 5
PR- 7. SYNTHETICS 18 MIN PR -8. WOOL AND DELICATES 17 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 3 32 0 2 4 - - - - - - 1 - - - 1 N 3 32 0 3 4 - - - - - - 1 - - -
2 N 3 32 0 2 2 - - - - - - 1 - - - 2 N 3 32 0 3 2 - - - - - - 1 - - -
3 N 2 32 1 2 4 - - - - - - 2 2 3 N 3 32 1 3 4 - - - - - - 1 - - -
4 Y 1 86 2 2 4 0 - - - 1 - - - 4 Y 2 68 2 2 6 1 - - - 1 - - -
5 Y 2 32 0 2 1 - - - - - - 3 2 5 Y 2 32 0 3 1 - - - - - - 1 - - -
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 3 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 3 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 3 1 - - - - - - 1 - - -
9 Y 2 32 4 2 2 - - - 0 4 5 9 Y 2 32 4 3 2 - - - 0 3 3

Advanced Mode
Cod. 411579
Rev. 02/0704
6
2.2.4. Default programs contents. Great Britain application.
PR- 1. EXTRA HEAVY SOIL -WHITE 49 MIN PR -2. HEAVY SOIL –WHITE 59 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 1 1 4 - - - - - - 1 - - - 1 Y 2 40 0 1 4 - - - - - - 1 - - -
2 Y 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 00 1 1 2 - - - - - - 3 3 3 Y 2 40 1 1 6 - - - - - - 3 3
4 Y 1 65 2 1 12 0 - - - 2 2 4 Y 1 60 2 1 10 0 - - - 2 2
5 Y 2 40 3 1 6 - - - - - - 1 - - - 5 Y 2 40 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 N 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 4 7 9 Y 2 0 4 1 4 - - - 0 4 7
PR -3. MEDIUM SOIL –WHITE 51 MIN PR -4. LIGHT SOIL –WHITE 37MIN
Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 2 30 0 1 4 - - - - - - 1 - - - 1 N 2 30 0 1 4 - - - - - - 1 - - -
2 N 2 0 0 1 2 - - - - - - 1 - - - 2 N 2 0 0 1 2 - - - - - - 1 - - -
3 Y 2 40 1 1 6 - - - - - - 3 3 3 N 2 30 1 1 6 - - - - - - 3 3
4 Y 1 50 2 1 8 0 - - - 2 2 4 Y 1 40 2 1 6 1 - - - 0 - - -
5 Y 2 30 3 1 6 - - - - - - 3 3 5 Y 2 30 3 1 6 - - - - - - 3 3
6 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 6 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
7 N 3 - - - - - - 1 2 - - - - - - 1 - - - 7 N 3 - - - - - - 1 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 1 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 1 2 - - - - - - 1 - - -
9 Y 2 0 4 1 4 - - - 0 4 7 9 Y 2 0 4 1 4 - - - 0 4 7
PR - 5. HEAVY SOIL –COLOR 51 MIN PR- 6. MEDIUM SOIL –COLOR 40 MIN
Ph Ph L C d r rt cd rh E Et Et Ph Ph L C d r rt cd rh E Et
1 N 2 40 0 2 4 - - - - - - 1 - - - 1 N 2 30 0 2 4 - - - - - - 1 - - -
2 Y 2 0 0 2 4 - - - - - - 1 - - - 2 N 2 0 0 2 2 - - - - - - 1 - - -
3 Y 2 40 1 2 6 - - - - - - 3 3 3 Y 2 40 1 2 4 - - - - - - 2 2
4 Y 1 40 2 1 10 0 - - - 2 2 4 Y 1 40 2 1 8 0 - - - 2 2
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 2 2 - - - - - - 3 3
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 2 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 2 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 2 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 4 7 9 Y 2 0 4 2 4 - - - 0 4 7
PR- 7. SYNTHETICS 30 MIN PR -8. WOOL AND DELICATES 32 MIN
Ph Ph L C d r rt cd rh E Et Ph Ph L C d r rt cd rh E Et
1 N 3 30 0 2 4 - - - - - - 1 - - - 1 N 3 0 0 3 4 - - - - - - 1 - - -
2 N 3 0 0 2 2 - - - - - - 1 - - - 2 N 3 0 0 3 2 - - - - - - 1 - - -
3 N 2 40 1 2 4 - - - - - - 2 2 3 Y 3 0 1 3 4 - - - - - - 1 - - -
4 Y 1 40 2 2 6 0 - - - 2 2 4 Y 2 30 2 2 8 1 - - - 1 - - -
5 Y 3 0 0 2 2 - - - - - - 3 3 5 Y 3 0 0 3 2 - - - - - - 1 - - -
6 N 3 - - - - - - 2 2 - - - - - - 1 - - - 6 N 3 - - - - - - 3 2 - - - - - - 1 - - -
7 N 3 - - - - - - 2 2 - - - - - - 1 - - - 7 N 3 - - - - - - 3 2 - - - - - - 1 - - -
8 Y 3 - - - - - - 2 2 - - - - - - 1 - - - 8 Y 3 - - - - - - 3 2 - - - - - - 1 - - -
9 Y 2 0 4 2 4 - - - 0 4 6 9 Y 3 0 4 3 4 - - - 0 3 3

Advanced Mode
Cod. 411579
Rev. 02/0704
7
2.2.5. Phases definition.
PHASES DEFINITION
1, 2, 3
4
5
6
7
8
9
Soaking and pre-washes. Optional execution phases. Water heating is permitted only in machines with
heating.
Washing. Obligatory execution phase. The mixing of hot and cold water is permitted and/or water heating.
First Rinse. Optional execution phase. The mixing of hot and cold water is permitted and/or water heating.
Dosing of bleach included in some programs.
Second Rinse. Optional execution phase.
Third Rinse. Optional execution phase.
Fourth Rinse. Optional execution phase.
Final Rinse. Obligatory execution phase. The mixing of hot and cold water is permitted and/or water
heating. Dosing of softener included and final extract.
2.2.6. Definition of programmable functions and values for each phase
PARAMETER CONCEPT OPTIONS
PH-Y Phase able to be executed
Ph Phase execution Ph-N Phase unable to be executed
L-1 Low level
L-2 Medium level
L-3 High level
(Level not programmable in machines with pump drain)
L Bath level
L-4 Extra high level
(Level not programmable in machines with pump drain)
0 / 77 Programmable range in Centigrade degrees
32 / 777 Programmable range in Fahrenheit degrees
C / F Bath temperature n.p Not possible to program temperature in phase
d-0 Phase without dosing
d-1 Dosing of pre-wash detergent
d-2 Dosing of wash detergent
d-3 Dosing of bleach
d-4 Dosing of softener or neutraliser
d Dosing
n.p. Not possible to program dosing in phase
r-1 Heavy-duty rotation: 25 sec. ON - 5 sec. OFF
r-2 Normal rotation: 15 sec. ON - 15 sec. OFF
r Type of rotation r-3 Delicate rotation: 5 sec. ON - 25 sec. OFF
1...8 Programmable range in pre-wash phase
1...20 Programmable range in wash phase
rt Rotation time
(in minutes) 1...4 Programmable range in rinse phases
0 Without progressive cool-down
1 Progressive cool-down in wash phasec Progressive
cool down n.p Option not programmable
0 Without stop in final rinse
1 Stop in final rinse
rh Program stop in final
rinse n.p Option not programmable
0 Phase without drain
1 Drain + wash speed
2 Drain + positioning speed
3 Drain + medium extract speed
EBath drain
4 Drain + high extract speed
Et Extract time 77 In minutes

Advanced Mode
Cod. 411579
Rev. 02/0704
8
2.2.7. Modification of a program
Access the MODIFICATION mode (section 2.1) The
display will indicate Pro.
Press the MOD key to access the PROGRAMMING
menu.
The display will indicate Pr-1. Ready to modify program
1. The V/ Wkeys are used to select another program.
Press the MOD key to access the modification of the
displayed program.
The display will indicate Ph-1. Ready to modify phase
1. The V/ Wkeys are used to select another phase.
Press the MOD key to start the modification to the
values of the selected phase.
When the number of the phase is displayed (start of
phase), the STOP key is used to finalise the program
modification.
Once finalised the modification of a program, the
display will show the Pr-* report. (modified program).
A pulsation on key STOP allows to access at the
superior level of the menu. Two consecutive pulsations
allow exiting the MODIFICATION mode.
Activation of the phase
Allows programming the execution of the selected
phase.
Once the desired phase to be modified has been
selected, press the MOD key. The display will indicate
Ph-*.
OPTIONS MEANING
Ph-Y Availability of the phase to be executed
Ph-N Unavailability of the phase to be
executed
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Bath level.
Allows the selection of bath level inside the washer.
OPTIONS MEANING
L-1 Low level
L-2 Medium level
L-3 High level
L-4 Extra high level
For safety, the options L-3 and L-4 are not
programmable in machines with pump drain.
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Temperature of the washing phase
Allows modifying the water temperature in the phases in
which this function is available. In other phases, it is not
possible to program the water temperature.
OPTIONS MEANING
C-00 ... C-40
F 32 ... F 104
Range of programmable temperature in
soak, prewash and rinses phases.
C- 77:Centigrade degrees
F777:Fahrenheit degrees
C-00 ... C-80
F 32 ... F 176
Range of programmable temperature in
wash phase.
C- 77:Centigrade degrees
F777:Fahrenheit degrees
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Dosing.
Permits to activate or deactivate dosing that appear in
the master table.
OPTIONS MEANING
d-0 Without dosing
d-1 External dosing of soak and prewash
detergent
d-2 External dosing of wash detergent
d-3 Bleach dosing
d-4 Softener or neutraliser dosing
n.p. Not possible to program dosing in the
phase
The first executed soak or pre-wash phase doses the
deposited detergent in the pre-wash compartment of
the washer dispenser. In these phases water enters
through this compartment.
The wash phase doses the product located at the wash
compartment of the washer dispenser. In the wash
phase the water enters through this compartment.
Options d-1 and d-2 only control the external product
dosing.
Options d-3 and d-4 control the entry of water into the
corresponding compartment of the dispenser and the
external product dosing.
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.

Advanced Mode
Cod. 411579
Rev. 02/0704
9
Rotation
The mechanical action of the washing machine
regarding the laundry is different according to the
selected rotation.
Time ON: drum in rotation
Time OFF: drum stopped.
OPTIONS MEANING
r-1 Heavy duty rotation
ON: 25 sec. OFF: 5 sec.
r-2 Normal rotation
ON: 15 sec. OFF: 15 sec.
r-3 Delicate rotation
ON: 5 sec. OFF: 25 sec.
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Rotation time
Rotation time programmed in the phase. It is valued in
minutes.
This time is started once the programmed temperature
and level are reached.
OPTIONS MEANING
1 ... 8 Programmable range in the soak and
pre-wash phases
1 ... 20 Programmable range in the wash phase
1 ... 8 Programmable range in the rinse phases
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Progressive cool down
Progressive cool-down of the water is done by adding
cold water until a temperature of 45ºC (113ºF) is
reached.
This function will appear only in the wash phase if the
programmed temperature is over 50ºC (122ºF).
OPTIONS MEANING
c-0 Progressive cool-down deactivated
c-1 Progressive cool-down activated
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Program stop
All the functions of the washing machine stop,
maintaining the water inside, with a light rotation of the
drum at 15 minute intervals. This is only programmable
in the final phase of the program.
This function is designed to avoid the laundry remaining
for a long time inside the drum, once the final spin is
finished, thus avoiding the appearance of creases.
OPTIONS MEANING
rh-0 Crease guard stop OFF
rh-1 Crease guard stop ON
The Vkey will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Bath drain
The draining of the water from the washing machine is
done through the activation of the drain system, either
by pump or by gravity at the same time the drum is
rotating.
Option E-1 implies an unchangeable time value. The
duration of options E-2 – E-4 is programmable within a
determined range.
OPTIONS MEANING
E-0 Without drain. Option used in program 4
only.
E-1 Drain and wash speed
E-2 Drain and low extract speed
E-3 Drain and medium extract speed
E-4 Drain and high extract speed
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and
allows access to the following programmable function.
Extract time
Extract time programmed in the phase. It is valued in
minutes.
OPTIONS MEANING
n.p. Drain time E-1
2 ... 4 Programmable range in not final phase
of the program
2 ... 9 Programmable range in final phase of
the program
The V/ Wkeys will modify the displayed option.
The MOD key validates the displayed selection and
ends the phase programming.
Display shows the following phase.
When finalising the programming of the last phase of the
program, display shows Pr-7(modified program)

Advanced Mode
Cod. 411579
Rev. 02/0704
10
2.3. Information menu. INFO menu.
PARAMETERS MEANING
LOGI Control for washing machines of
general use
EP 77 Version of program
Pr Number of cycles executed
SUD Number of times the anti-suds function
has been activated
Access the MODIFICATION menu. Section 2.1. Display
shows Pro.
Press Vkey. Display shows INFO.
Press the MOD key to sequentially access the listing of
the different parameters and the values of the
corresponding counters.
Once the last option is listed, press the MOD key.
Display shows INFO.
The V/ Wkeys allow the access to other menus.
To exit the MODIFICATION menu press the STOP key.
2.4. Modification of operating
parameters. Mod menu.
The Mod menu allows the modification of the operation
parameters of all the programs.
The modifications carried out from Mod menu affects the
eight programs.
Summary table of the changeable parameters:
PARAMETER MODIFICATION OF OPTIONS CE USA
b-0 Without buzzer
b-1 Low buzzer
b-2 Normal buzzer ÍÍ
b Buzzer
b-3 Strong buzzer
C Temperature displayed in Centigrade degrees Í
C / F Temperature unit F Temperature displayed in Fahrenheit degrees Í
AC-0 Without acceleration permission
AC Program acceleration AC-1 With acceleration permission ÍÍ
SP-0 Without suds prevention ÍÍ
SP-1 First level of suds prevention
SP Levels of suds
prevention SP-2 Second level of suds prevention
ÍIndicates default option following configuration.

Advanced Mode
Cod. 411579
Rev. 02/0704
11
2.4.1. Parameters modification
Access the MODIFICATION mode. Section 2.1. Display
shows Pro.
Press key Vtwice. In the display reports INFO, Mod
are showed successively.
Press the MOD key to display the first parameter.
Buzzer
The door safety unlock can be advised by the sounding
of a beep. The duration of this warning is
programmable.
OPTIONS MEANING
b-0 Buzzer OFF
b-1 Low buzzer: two beep
b-2 Normal buzzer: four beep
b-3 Strong buzzer: six beep
The key Vallows the modification of the option
displayed.
The MOD key validates the selection on the display and
permits the access to the following programmable
function.
Temperature unit
The bath water temperature can be displayed in
Centigrade or Fahrenheit degrees.
OPTIONS MEANING
C Temperature unit in Centigrade degrees
F Temperature unit in Fahrenheit degrees
The key Vallows the modification of the option
displayed.
The MOD key validates the selection on the display and
permits the access to the following programmable
function.
Program acceleration
Program acceleration can reduce the time of the
programs accessing to functions or subsequent phases,
or reducing the times of rotation and spinning. There is
also the possibility to increment the rotation times.
The option AC enables or disables the utilisation of the
ACCEL (acceleration) key
OPTIONS MEANING
AC-0 Acceleration option disabled
AC-1 Acceleration option enabled
The key Vallows the modification of the option
displayed.
The MOD key validates the selection on the display and
permits the access to the following programmable
function.
Suds prevention program
Certain detergents commonly used in some countries
produce large quantities of suds and can complicate the
proper functioning of the wash programs.
To mitigate this complication it is advisable to use the
anti-suds program.
The anti-suds program consists of TWO levels of
prevention. Each level of prevention involves a light
increment in the duration of the program and of the
consumption of water and energy.
Once programmed, the prevention is activated
automatically in the case that the washing machine
detects excessive suds within the interior of the drum.
OPTIONS MEANING
SP-0 Without suds prevention
SP-1 First level of suds prevention
SP-2 Second level of suds prevention
The key Vallows the modification of the option
displayed.
The MOD key validates the selection on the display.
Display shows Mod.
The keys V/ Wallow the access to other menus.
To exit the MODIFICATION mode press the STOP key.

Advanced Mode
Cod. 411579
Rev. 02/0704
12
2.5. Modification of the access code
to MODIFICATION mode. Ncod menu.
As it is described in section 2.1, the access to
CONFIGURATION mode is restricted with an access
code.
This code can be modified by the user if he wants to.
It must always contain a combination of EIGHT keys
Access code modification.
Access the MODIFICATION mode. Section 2.1. Display
shows Pro.
Press the Vkey three times. INFO, Mod, Ncod reports
will be showed in the display successively.
Press the MOD key to set a new code. All the
information of the display goes out.
Enter a combination of eight keys using the four central
keys in the control panel.
The key pushed is displayed in the display as follows:
KEY CORRESPONDENCE
MOD 1
V2
ACCEL 3
W4
At the end of the sequence the SURE report will be
showed.
Confirm the new code with the ACCEL key.
If you don’t want to validate the code, push the STOP
key.
Display will show Ncod.
The keys V/ Wallow the access to other menus.
To exit the MODIFICATION mode press the STOP key.
NOTE.
If you forget the modified code, call the Service
department to restore the original code.
2.6. Clock of the system. Hour Menu
The access to this menu is only possible if the option
clock is available.
This menu allows the user to enquire and / or modify the
hour in the system.
The clock must be at the real time for the proper
operation of the starting time.
2.6.1 To set the clock
Access the MODIFICATION mode. Section 2.1. Display
shows Pro.
Press the Vkey four times. INFO, Mod, Ncod, Hour
reports will be showed in the display successively.
When displaying Hour push the MOD key. The SURE
report will be displayed.
The control of the washing machine asks for the
confirmation of the access command for the time
modification.
To exit the Hour menu, push STOP
Push ACCEL to access the modification of the clock
time.
The hour of the system is showed in the display in the
format: hh.mm (hour format: 24 hours).
The changeable parameters are showed flashing.
Push the ACCEL key to pass from the minute
modification to the hour modification.
Change the selected value with the V/Wkeys.
Push the MOD key to validate the selection.
STOP allows leaving the menu without validating the
modification.
After validating the time selection, Hour is showed in the
display.
The V/Wkeys allow the access to other menus.
To exit the MODIFICATION mode press the STOP key.
The washing machine can carry out the programs.

Advanced Mode
Cod. 411579
Rev. 02/0704
13
ANNEX 1 - Defaut program contents. USA / CANADA application. 20-29 versions.
PR- 1. EXTRA HEAVY SOIL -WHITE 47 MIN PR -2. HEAVY SOIL –WHITE 44 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 1 1 4 - - - - - - 1 - - - 1 N 2 104 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 Y 2 104 1 1 6 - - - - - - 3 3 3 Y 2 104 1 1 6 - - - - - - 3 3
4 Y 1 140 2 1 10 0 - - - 2 2 4 Y 1 140 2 1 8 0 - - - 2 2
5 Y 2 104 3 1 5 - - - - - - 3 3 5 Y 2 104 3 1 5 - - - - - - 3 3
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 Y 3 - - - - - 1 1 - - - - - - 1 - - - 8 Y 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 4 - - - 0 4 7 9 Y 2 32 4 1 3 - - - 0 4 7
PR -3. MEDIUM SOIL –WHITE 42 MIN PR -4. LIGHT SOIL –WHITE 27MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 2 86 0 1 4 - - - - - - 1 - - - 1 N 2 86 0 1 4 - - - - - - 1 - - -
2 N 2 32 0 1 2 - - - - - - 1 - - - 2 N 2 32 0 1 2 - - - - - - 1 - - -
3 Y 2 104 1 1 6 - - - - - - 3 3 3 N 2 86 1 1 6 - - - - - - 3 3
4 Y 1 122 2 1 7 0 - - - 2 2 4 Y 1 104 2 1 4 1 - - - 0 - - -
5 Y 2 86 3 1 4 - - - - - - 3 3 5 Y 2 86 3 1 4 - - - - - - 3 3
6 N 3 - - - - - 1 1 - - - - - - 1 - - - 6 N 3 - - - - - 1 1 - - - - - - 1 - - -
7 N 3 - - - - - 1 1 - - - - - - 1 - - - 7 N 3 - - - - - 1 1 - - - - - - 1 - - -
8 Y 3 - - - - - 1 1 - - - - - - 1 - - - 8 Y 3 - - - - - 1 1 - - - - - - 1 - - -
9 Y 2 32 4 1 3 - - - 0 4 7 9 Y 2 32 4 1 3 - - - 0 4 7
PR - 5. HEAVY SOIL –COLOR 37 MIN PR- 6. MEDIUM SOIL –COLOR 33 MIN
Ph Ph L F d r rt cd rh E Et Et Ph Ph L F dr rt cd rh E Et
1 N 2 104 0 2 4 - - - - - - 1 - - - 1 N 2 86 0 2 4 - - - - - - 1 - - -
2 N 2 32 0 2 4 - - - - - - 1 - - - 2 N 2 32 0 2 2 - - - - - - 1 - - -
3 Y 2 104 1 2 6 - - - - - - 3 3 3 Y 2 104 1 2 4 - - - - - - 2 2
4 Y 1 104 2 1 8 0 - - - 2 2 4 Y 1 104 2 1 7 0 - - - 2 2
5 Y 3 32 0 2 1 - - - - - - 3 3 5 Y 3 32 0 2 1 - - - - - - 3 3
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 2 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 2 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 2 1 - - - - - - 1 - - -
9 Y 2 32 4 2 3 - - - 0 4 7 9 Y 2 32 4 2 3 - - - 0 4 7
PR- 7. SYNTHETICS 22 MIN PR -8. WOOL AND DELICATES 24 MIN
Ph Ph L F d r rt cd rh E Et Ph Ph L F d r rt cd rh E Et
1 N 3 86 0 2 4 - - - - - - 1 - - - 1 N 3 32 0 3 4 - - - - - - 1 - - -
2 N 3 32 0 2 2 - - - - - - 1 - - - 2 N 3 32 0 3 2 - - - - - - 1 - - -
3 N 2 104 1 2 4 - - - - - - 2 2 3 Y 3 32 1 3 4 - - - - - - 1 - - -
4 Y 1 104 2 2 4 0 - - - 2 2 4 Y 2 86 2 2 6 1 - - - 1 - - -
5 Y 3 32 0 2 1 - - - - - - 3 3 5 Y 3 32 0 3 1 - - - - - - 1 - - -
6 N 3 - - - - - 2 1 - - - - - - 1 - - - 6 N 3 - - - - - 3 1 - - - - - - 1 - - -
7 N 3 - - - - - 2 1 - - - - - - 1 - - - 7 N 3 - - - - - 3 1 - - - - - - 1 - - -
8 N 3 - - - - - 2 1 - - - - - - 1 - - - 8 N 3 - - - - - 3 1 - - - - - - 1 - - -
9 Y 2 32 4 2 3 - - - 0 4 6 9 Y 3 32 4 3 3 - - - 0 3 3