Global Fire Equipment Valkyrie Vox C User manual

MANUAL - 09/2017
MADE IN PORTUGAL - EU
TECHNICAL SPECIFICATIONS
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: [phone] • Sales: [email protected] • Technical Support: t[email protected] • www.globalfire.pt
Valkyrie Vox C
Conventional Voice Sounder/Beacon
ORDER CODE DESCRIPTION
CONVENTIONAL VOICE SOUNDER
CONVENTIONAL VOICE SOUNDER WITH BEACON
VALKYRIE VOX-C
VALKYRIE VOX-CB
20 V to 30 V DC
28 mA (Average) - 65 mA (Peak) @ 24 VDC
Tone 103 dBA - Voice Message 106 dBA
2
2.5 mm
95% RH Non-Condensing
-10ºC to 50ºC
Red or White / ABS & PC
IP21C - Type A - Indoor Use
109.5 (D) x 85.1 (H) mm / 265 g - 315 g including packaging
SUPPLY VOLTAGE
LOOP CURRENT
SOUND OUTPUT @ 1 METER
MAX. CABLE SIZE
MAX. HUMIDITY
OPERATING TEMPERATURE
COLOUR / CASE MATERIAL
PROTECTION CATEGORY
DIMENSIONS / WEIGHT
BASE LOCK
To lock sounder remove pin
available at terminal 4 on the
underside of the sounder using
a small screwdriver.
To unlock sounder from its base
push provided unlock key
through hole available on the
base side wall as shown.
1 2 3456 7 8
Address

MORE INFO >> WWW.GLOBALFIRE.PT
Please note that this device is polarised.
USB CONNECTOR
USB CONNECTOR
NOTE: Only last device in Sounder Circuit should have e.o.l. (end of line) fitted across + and - terminals.
To next device
in Sounder Circuit
Sounder
Circuit
PANEL
E.O.L
4
1
3
2
IN
OUT
Fire Message
Alert Message
Terminals
1 - Negative Supply - Fire Message
2 - Positive Supply - OUT
3 - Negative Supply - Alert Message
4 - Positive Supply - IN
SOUNDER BASE - CONNECTIONS
Use USB connector in conjuction with GFE’s Vox Loader PC Software
to program new tones and voice messages.
Software can be downloaded from our website www.globafire.pt