Globe Scientific GCC-S User manual

UNPACKING THE UNIT
Please be sure to remove any packing materials
used during initial shipment:
1) Press the button on the right side to open the lid.
What’s in the box:
• Quick Start Guide
• Centrifuge
• Power Cable
• Rotor
• Wrench
• Sleeve Adapters (12 each)
• Riser Adapters (12 each)
GCC-S / Standard
Clinical Centrifuge
Quick Start Guide
2) Remove foam pads at the hinge latch and from
around the rotor.
LOADING INSTRUCTIONS
IMPORTANT: The rotor should always
be loaded in a balanced manner to avoid
personal injury and to ensure centrifuge
longevity.
• When any tube is loaded, a tube of the
same type, volume and weight must be
added in the opposite rotor location.
• Never intentionally run the centrifuge in
an unbalanced condition even if operation
is not affected.
Continued . . .

CONTROL PANEL
Starting the Unit:
IMPORTANT: Plug unit into appropriate main supply based
on the rated voltage.
• Press the power button and the display screen will light up.
• Press the speed buttons to adjust to the desired setting.
• Press the time buttons to adjust to the desired time setting. For
set times above 60 seconds, the “min” (minute) light will be lit.
Under 60 seconds, the “sec” (second) light will be lit.
• Press the “RUN/STOP” button to start the centrifuge.
Stopping the Unit:
There are three conditions under which the centrifuge will
stop running:
• When the set time runs out.
• Pressing the “RUN/STOP” button before the set time runs out.
• Opening the lid.
OPERATION
Error Indicator
Open Lid
Indicator
Speed Adjustment Time Adjustment
Seconds
Minutes
Run/Stop
®
Customer Service, Sales and Technical Support:
Phone: [phone] • 1 [phone]
Fax: 1(201)599-1406•E-mail:mail@globescientic.com
©2019GlobeScienticInc.Allrightsreserved.TheGlobeScienticlogoisaregisteredtrademarkofGlobeScienticInc.GCC-SGuide19107
GCC-S / Standard
Clinical Centrifuge
Quick Start Guide
For the full User Manual, please visit www.globescientic.com
Rotor Tube Tubes Dimension Adapters Maximum Radius Maximum
Type Type Per Rotor (ø×L mm) Required Speed (rpm) (cm) RCF (×g)
  15mLConical 8 17×120 None 4500 11 2490
1.5 - 5mL 12 13×82 CC-AD1 4500 9.8 2218
Vacuum CC-PLUG
4-7mL  13×106 CC-AD1 11 2490
Vacuum 12 16×75 CC-AD1 4500
CC-PLUG 9.8 2218
8.5-10mLVacuum 12 16×107 CC-AD1 4500 11 2490
  2.7-3mL(EU) 12 11×66 CC-AD1 4500 9.8 2218
Collection CC-PLUG
  7.5-8.2mL (EU) 12 15×92 CC-AD1 4500 11 2490
Collection
CC-R1
(Standard
Rotor)