Globe GL-QR/ECLH Series User manual

DEC 2017 GFS-200 (Formerly A-42)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5614
PENDENT RECESSED PENDENT
DESCRIPTION AND OPERATION
SERIES GL-QR/ECLH
EXTENDED COVERAGE
PENDENT
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
• Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
• Escutcheon Assembly - steel
SERIES GL-QR/ECLH
EXTENDED COVERAGE
RECESSED PENDENT
The Globe Quick Response GL5614 Extended Coverage Pen-
dent Sprinkler for Light Hazard occupancies is a low profile yet
durable design which utilizes a 3mm frangible glass ampule as
the thermosensitive element. This provides sprinkler operation
approximately six times faster than ordinary sprinklers. While this
Quick Response Sprinkler provides an aesthetically pleasing ap-
pearance, it can be installed wherever standard light hazard ex-
tended coverage pendent sprinklers are specified; but offers the
additional feature of greatly increased safety to life. Quick Re-
sponse Sprinklers should be used advisedly and under the direc-
tion of approving authorities having jurisdiction, in accordance with
their listings and in accordance with NFPA 13.
The heart of Globe's Series GL-QR sprinkler proven actu-
ating assembly is a hermetically sealed frangible glass ampule
that contains a precisely measured amount of fluid. When heat is
absorbed, the liquid within the bulb expands increasing the inter-
nal pressure. At the prescribed temperature the internal pressure
within the ampule exceeds the strength of the glass causing the
glass to shatter. This results in water discharge which is distrib-
uted in an approved pattern.
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F/155°F 175°F/200°F 57°C/68°C 79°C/93°C ORANGE/RED YELLOW/GREEN 100°F 150°F 38°C 66°C

DEC 2017 GFS-200 (Formerly A-42)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FINISHES AVAILABLE ON SPECIAL ORDER.
2AVAILABLE AS cULus LISTEDAS CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
1" x 1/2"
REDUCER
CEILING CUP
RETAINER
2 15/16" DIA.
2" MIN. DIA.
HOLE IN CEILING
1 29/32" DIA.
1/8"
1/8" MIN.
7/8" MAX.
1" MIN.
1 3/4" MAX.
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR
THE NEXT HIGHEST COVERAGEAREA FOR WHICH DESIGN CRITERIAARE STATED.
CROSS SECTION
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
QUICK RESPONSE
EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5614
PENDENT RECESSED PENDENT
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 325390
•Quantity - ¾” Adjustable Recessed Escutcheons
•Quantity - Recessed Wrenches - P/N 325391
• Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed)
SPECIFY
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN NOMINAL
“K” FACTOR THREAD SIZE LENGTH FINISHES cULus
GL5614 5.6 (80 metric) 1/2”NPT
(15mm) 2 1/2” (6.4cm)
Factory Bronze
Chrome
White Polyester2
Black Polyester1,2
X
SIN STYLE
TEMPERATURE MAX. AREA OF
COVERAGE
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN. FLOW
G.P.M. (L/min.)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
GL5614 PENDENT RECESSED
PENDENT
XXXX
16 (4.9) x 16 (4.9) 21.5 (1.48) 26 (98)
8 (2.4)18 (5.5) x 18 (5.5) 34.7 (2.39) 33 (125)
X --- --- --- 20 (6.1) x 20 (6.1) 51 (3.52) 40 (151)

DEC 2017 GFS-205 (Formerly A-41)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL8109
PENDENT RECESSED PENDENT
DESCRIPTION AND OPERATION
SERIES GL-QR/ECLH
EXTENDED COVERAGE
PENDENT
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
•Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
• Escutcheon Assembly - steel
SERIES GL-QR/ECLH
EXTENDED COVERAGE
RECESSED PENDENT
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F/155°F 175°F/200°F 57°C/68°C 79°C/93°C ORANGE/RED YELLOW/GREEN 100°F 150°F 38°C 66°C
TheGlobeQuickResponseGL8109ExtendedCoveragePendent
Sprinkler for Light Hazard occupancies is a low profile yet durable
design which utilizes a 3mm frangible glass ampule as the thermo-
sensitive element. This provides sprinkler operation approximately
sixtimesfasterthanordinarysprinklers. WhilethisQuickResponse
Sprinkler provides an aesthetically pleasing appearance, it can be
installedwhereverstandardlighthazardextendedcoveragependent
sprinklers are specified; but offers the additional feature of greatly
increasedsafetytolife. Quick ResponseSprinklersshouldbeused
advisedly and under the direction of approving authorities having
jurisdiction, in accordance with their listings and in accordance with
NFPA 13.
The heartof Globe'sSeriesGL-QR sprinkler provenactuatingas-
semblyisahermeticallysealedfrangibleglassampulethatcontains
a precisely measured amount of fluid. When heat is absorbed, the
liquid within the bulb expands increasing the internal pressure. At
the prescribed temperature the internal pressure within the ampule
exceeds the strength of the glass causing the glass to shatter. This
resultsinwaterdischargewhichisdistributedinanapprovedpattern.

DEC 2017 GFS-205 (Formerly A-41)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FINISHES AVAILABLE ON SPECIAL ORDER.
2AVAILABLE AS cULus LISTEDAS CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
1 29/32" DIA.
2" DIA. MIN.
HOLE IN CEILING
2 15/16" DIA.
1" MIN.
1 3/4" MAX.
1/8"
1/8" MIN.
7/8" MAX.
RETAINER
CUP
CEILING
1" x 3/4"
REDUCER
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR
THE NEXT HIGHEST COVERAGEAREA FOR WHICH DESIGN CRITERIAARE STATED.
CROSS SECTION
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
QUICK RESPONSE
EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL8109
PENDENT RECESSED PENDENT
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 325390
•Quantity - ¾” Adjustable Recessed Escutcheons
•Quantity - Recessed Wrenches - P/N 325391
• Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed)
SPECIFY
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN NOMINAL
“K” FACTOR THREAD SIZE LENGTH FINISHES cULus
GL8109 8.0 (115 metric) 3/4”NPT
(20mm) 3” (7.6cm)
Factory Bronze
Chrome
White Polyester2
Black Polyester1,2
X
SIN STYLE
TEMPERATURE MAX. AREA OF
COVERAGE
LENGTH x WIDTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN. FLOW
G.P.M. (L/min.)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
GL8109 PENDENT RECESSED
PENDENT
XXXX
16 (4.9) x 16 (4.9) 10.3 (0.71) 26 (98)
8 (2.4)18 (5.5) x 18 (5.5) 16.6 (1.14) 33 (125)
X --- --- --- 20 (6.1) x 20 (6.1) 24.4 (1.68) 40 (151)
3/4” ADJUSTMENT RECESSED PENDENT

DEC 2017 GFS-240 (Formerly A-53)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL1112
PENDENT RECESSED PENDENT
DESCRIPTION AND OPERATION
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
SERIES GL-QR/ECLH
EXTENDED COVERAGE
LIGHT HAZARD
PENDENT
GL1112
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
•Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
•Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
•Escutcheon Assembly - steel
SERIES GL-QR/ECLH
EXTENDED COVERAGE
LIGHT HAZARD
RECESSED PENDENT
GL1112
The Globe Quick Response GL1112 Extended Coverage
Extra Large Orifice Pendent Sprinkler for Light Hazard oc-
cupancies is a low profile yet durable design which utilizes
a 3mm frangible glass ampule as the thermosensitive ele-
ment. This provides sprinkler operation approximately six
times faster than ordinary sprinklers. The Extended Coverage
Light Hazard Quick Response Sprinkler provides an aestheti-
cally pleasing appearance and offers the additional feature
of greatly increased safety to life. It can be installed wher-
ever light hazard extended coverage pendent sprinklers are
specified. Quick Response Sprinklers should be used advis-
edly and under the direction of approving authorities having
jurisdiction and in accordance with their listings.
The heart of Globe's GL1112 sprinkler proven actuating
assembly is a hermetically sealed frangible glass ampule that
contains a precisely measured amount of fluid. When heat is
absorbed, the liquid within the bulb expands increasing the
internal pressure. At the prescribed temperature the internal
pressure within the ampule exceeds the strength of the glass
causing the glass to shatter. This results in water discharge
which is distributed in an approved pattern.
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F/155°F 175°F/200°F 57°C/68°C 79°C/93°C ORANGE/RED YELLOW/GREEN 100°F 150°F 38°C 66°C

DEC 2017 GFS-240 (Formerly A-53)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1 SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
2 FINISHES AVAILABLE ON SPECIAL ORDER.
3AVAILABLE AS cULus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
EXTRA LARGE ORIFICE
AUTOMATIC SPRINKLERS
GL1112
PENDENT RECESSED PENDENT
2" DIA. MIN.
HOLE IN CEILING
2 15/16" DIA.
1 29/32" DIA.
1" x 3/4" REDUCER
1/8" MIN.
7/8" MAX.
1/8"
1" MIN.
1 1/2" MAX.
RETAINER
CUP
CEILING
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 333010
• Quantity - Recessed Wrenches - P/N 333011
SPECIFY
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARD ONLY
CROSS SECTION
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1/2”: 1/2” RECESSED ADJUSTMENT
3/4”: 3/4” RECESSED ADJUSTMENT
RECESSED PENDENT
SIN NOMINAL
“K” FACTOR HAZARD1THREAD SIZE LENGTH FINISHES cULus
GL1112 11.2 (160 metric) LIGHT 3/4”NPT
(20mm) 2 7/16” (6.2cm)
Factory Bronze
Chrome
White Polyester3
Black Polyester2,3
X
SIN STYLE
TEMPERATURE MAX. AREA OF
COVERAGE
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN. FLOW
G.P.M. (L/min.)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
GL1112
PENDENT XXXX
18 (5.5) x 18 (5.5) 8.7 (.60) 33 (125)
6 (1.8)
RECESSED PENDENT 3/4” 1/2” --- 1/2”
PENDENT X X X --- 20 (6.1) x 20 (6.1) 12.8 (.88) 40 (151)
RECESSED PENDENT 3/4” --- 1/2” ---

DEC 2017 GFS-255 (Formerly A-79)
EXTENDED COVERAGE
ORDINARY HAZARD
AUTOMATIC SPRINKLERS
GL1121 & GL1113
UPRIGHT PENDENT
RECESSED PENDENT
DESCRIPTION AND OPERATION
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
EXTENDED COVERAGE
ORDINARY HAZARD UPRIGHT
GL1121
SERIES GL-ECOH
SERIES GL-ECOH
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
155°F (68°C), 175°F (79°C), 200°F (93°C), 286°F (141°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
•Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is 67°F(-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
•Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
•Escutcheon Assembly - steel
EXTENDED COVERAGE
ORDINARY HAZARD
PENDENT RECESSED PENDENT
GL1113
The Globe Series GL-ECOH Extended Coverage Ordi-
nary Hazard Extra Large Orifice Sprinkler is a low profile yet
durable design which utilizes a 3mm frangible glass ampule as
the thermosensitive element. While the sprinkler provides an
aesthetically pleasing appearance, it serves to protect various
areas of coverage. This sprinkler series is available in various
styles, temperature ratings and several finishes to meet many
varying design requirements. The Globe Series GL-ECOH Ex-
tended Coverage Ordinary Hazard Extra Large Orifice Sprin-
kler is to be installed per NFPA 13 guidelines.
The heart of Globe's Series GL sprinkler proven actuat-
ing assembly is a hermetically sealed frangible glass ampule
that contains a precisely measured amount of fluid. When heat
is absorbed, the liquid within the bulb expands increasing the
internal pressure. At the prescribed temperature the internal
pressure within the ampule exceeds the strength of the glass
causing the glass to shatter. This results in water discharge
which is distributed in an approved pattern depending upon the
deflector style used.
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE
HIGH
155°F
175°F/200°F
286°F
68°C
79°C/93°C
141°C
RED
YELLOW/GREEN
BLUE
100°F
150°F
225°F
38°C
66°C
107°C

DEC 2017 GFS-255 (Formerly A-79)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
2 FINISHES AVAILABLE ON SPECIAL ORDER.
3 AVAILABLE AS cULus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
EXTENDED COVERAGE
ORDINARY HAZARD
EXTRA LARGE ORIFICE
AUTOMATIC SPRINKLERS
GL1121 & GL1113
UPRIGHT PENDENT PENDENT RECESSED
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR THE NEXT HIGHEST COVERAGE AREA
FOR WHICH HYDRAULIC DESIGN CRITERIAARE STATED.
MINIMUM DISTANCE BETWEEN UPRIGHT SPRINKLERS (GL1121) IS 11 FEET (3.4 METERS).
MINIMUM DISTANCE BETWEEN PENDENT SPRINKLERS (GL1113) IS 9 FEET (2.7 METERS).
2" DIA. MIN.
HOLE IN CEILING
1/8"
1/8" MIN.
7/8" MAX.
CEILING
2 15/16" DIA.
1 29/32" DIA.
1" MIN.
1 3/4" MAX.
1" x 3/4" REDUCER
CUP
RETAINER
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 333010
•Quantity - Recessed Wrenches - P/N 333011
SPECIFY
cULus LISTING DESIGN - USE REQUIREMENTS FOR ORDINARY HAZARD ONLY
CROSS SECTION
NOMINAL
“K” FACTOR THREAD SIZE LENGTH FINISHES cULus
11.2
(160 metric) 3/4”NPT (20mm) 2 7/16” (6.2cm)
Factory Bronze
Chrome
White Polyester3
Black Polyester2,3
X
RESPONSE SIN STYLE
TEMPERATURES
MAX. AREA OF
COVERAGE
LENGTH x WIDTH
Feet (Meters)
ORDINARY GROUP 1 ORDINARY GROUP 2
155°F
(68°C) 175°F (79°C) 200°F (93°C) 286°F (141°C)
MIN.
PRESSURE
P.S.I. (bars)
MIN.
FLOW
G.P.M. (L/min.)
MIN.
PRESSURE
P.S.I. (bars)
MIN.
FLOW
G.P.M. (L/min.)
QUICK
RESPONSE
GL1121 UPRIGHT
X --- X --- 14 (4.3) x 14 (4.3) 7 (.48) 30 (114) 12 (.83) 39 (148)
GL1113
PENDENT
RECESSED PENDENT
STANDARD
RESPONSE
GL1121 UPRIGHT
XXXX
16 (4.9) x 16 (4.9) 12 (.83) 39 (148) 21 (1.45) 51 (193)
GL1113
PENDENT
RECESSED PENDENT 18 (5.5) x 18 (5.5)
19 (1.31) 49 (185) 34 (2.34) 65 (246)
20 (6.1) x 20 (6.1) 29 (2.0) 60 (227) 51 (3.52) 80 (303)

DEC 2017 GFS-220 (Formerly A-44)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5628
HORIZONTAL SIDEWALL
RECESSED HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
SERIES GL-QR/ECLH/SW
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
135°F (57°C), 155°F (68°C), 175°F (79°C), 200°F (93°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
•Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
• Escutcheon Assembly - steel
SERIES GL-QR/ECLH/SW
EXTENDED COVERAGE
RECESSED
HORIZONTAL SIDEWALL
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F/155°F 175°F/200°F 57°C/68°C 79°C/93°C ORANGE/RED YELLOW/GREEN 100°F 150°F 38°C 66°C
The Globe Quick Response GL5628 Extended Coverage Hori-
zontal Sidewall Sprinkler is a low profile yet durable design which
utilizesa3mmfrangibleglassampuleasthethermosensitiveelement.
This provides sprinkler operation approximately six times faster than
ordinary sprinklers. While these Quick Response Sprinklers provide
anaestheticallypleasingappearance,theycanbeinstalledwherever
standard extended coverage horizontal sprinklers are specified; but
offer the additional feature of greatly increased safety to life. Quick
Response Sprinklers should be used advisedly and under the direc-
tion of approving authorities having jurisdiction, in accordance with
their listings and in accordance with NFPA 13.
The heart of Globe’s Series GL-QR sprinkler proven actuating as-
sembly is a hermetically sealed frangible glass ampule that contains
a precisely measured amount of fluid. When heat is absorbed, the
liquid within the bulb expands increasing the internal pressure. At
the prescribed temperature the internal pressure within the ampule
exceeds the strength of the glass causing the glass to shatter. This
resultsinwaterdischargewhichisdistributedinanapprovedpattern.

DEC 2017 GFS-220 (Formerly A-44)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FINISHES AVAILABLE ON SPECIAL ORDER.
2AVAILABLE AS cULus LISTEDAS CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 325390
•Quantity - Recessed Escutcheons
•Quantity - Recessed Wrenches - P/N 325391
• Quantity - Protective Caps - P/N 327109-CAP
• (Friction Fit Recessed)
SPECIFY
SIN NOMINAL
“K” FACTOR THREAD SIZE LENGTH FINISHES cULus
GL5628 5.6 (80 metric) 1/2”NPT
(15mm) 2 1/2” (6.4cm)
Factory Bronze
Chrome
White Polyester2
Black Polyester1,2
X
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR
THE NEXT HIGHEST COVERAGEAREA FOR WHICH DESIGN CRITERIAARE STATED.
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN STYLE
TEMPERATURE
MAX. AREA OF
COVERAGE
WIDTH x LENGTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN.
FLOW
G.P.M.
(L/min.)
DEFLECTOR
TO CEILING
DISTANCE
Inches (mm)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
GL5628
HORIZONTAL
SIDEWALL
X X X X** 16 (4.9) x 16 (4.9) 21.6 (1.49) 26 (98)
4 (102)
to
12 (305) 7 (2.1)
X X X X** 16 (4.9) x 18 (5.5) 26.8 (1.85) 29 (110)
X --- X --- 16 (4.9) x 20 (6.1) 32.7 (2.25) 32 (125)
X X X X** 18 (5.5) x 18 (5.5) 32.7 (2.25) 32 (125)
RECESSED-
HORIZONTAL
SIDEWALL
X X X X** 16 (4.9) x 16 (4.9) 21.6 (1.49) 26 (98)
X X X X** 16 (4.9) x 18 (5.5) 26.8 (1.85) 29 (110)
X --- --- --- 16 (4.9) x 20 (6.1) 32.7 (2.25) 32 (125)
X X X X** 18 (5.5) x 18 (5.5) 32.7 (2.25) 32 (125)
QUICK RESPONSE
EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS GL5628
HORIZONTAL SIDEWALL RECESSED HORIZONTAL SIDEWALL
4" MIN.
12" MAX.
CEILING
WALL
RETAINER
CUP
1" x 1/2" REDUCER
2 15/16"
DIA.
2" MIN. DIA.
HOLE IN CEILING
1 29/32"
DIA.
1/8"
1" MIN.
1 3/4" MAX.
1/8" MIN.
7/8" MAX.
CROSS SECTION
(3/4”) ADJUSTMENT RECESSED
HORIZONTAL SIDEWALL
3/4” ADJ. RECESSED ESCUTCHEON PART NUMBERS
FRICTION FIT THREADED
WHITE CHROME WHITE CHROME
325426-W 325422 329308-W 329306
**200°F (93° C) LISTED AT 4” (102) TO 6” (152)
DEFLECTOR DISTANCE FROM CEILING

DEC 2017 GFS-225 (Formerly A-46)
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL SERIES
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
SERIES GL-ECLH/SW
SERIES GL-ECLH/SW
EXTENDED COVERAGE
HORIZONTAL SIDEWALL
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
TECHNICAL DATA
• See reverse side for Approvals and Specifications.
• Temperature Ratings -
135°F (57°C), 155°F (68°C), 175°F (79°C), 200° (93°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze •Deflector - brass •Screw - brass
•Bulb seat - copper •Spring - nickel alloy •Seal - teflon
• Bulb - glass with alcohol based solution, 3mm size
• Escutcheon Assembly - steel
EXTENDED COVERAGE
RECESSED
HORIZONTAL SIDEWALL
The Globe GL8128, GL8129 and GL8174 Ex-
tended Coverage Horizontal Sidewall Sprinklers
are a low profile yet durable design which utilizes a
3mm frangible glass ampule as the thermosensitive
element. While the sprinkler provides an aesthetically
pleasing appearance, it serves to protect various area
coverages and should be installed in accordance with
NFPA 13. This sprinkler series is available in various
temperature ratings and several finishes to meet many
varying design requirements.
TheheartofGlobe'sSeriesGL-ECLH sprinklerproven
actuating assembly is a hermetically sealed frangi-
ble glass ampule that contains a precisely measured
amount of fluid. When heat is absorbed, the liquid with-
in the bulb expands increasing the internal pressure. At
the prescribed temperature the internal pressure within
the ampule exceeds the strength of the glass causing
the glass to shatter. This results in water discharge
which is distributed in an approved pattern.
CLASSIFICATION AVAILVABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F/155°F 175°F/200°F 57°C/68°C 79°C/93°C ORANGE/RED YELLOW/GREEN 100°F 150°F 38°C 66°C

DEC 2017 GFS-225 (Formerly A-46)
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
FAX [phone]
www.globesprinkler.com
989-846-4583
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specific details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATION
• Quantity •SIN •Style •Orifice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 312366
•Quantity - Recessed Wrenches - P/N 325401
• Quantity - Protective Caps - P/N 327109-CAP
(Friction Fit Recessed)
SPECIFY
EXTENDED COVERAGE
LIGHT HAZARD AUTOMATIC SPRINKLERS
GL SERIES HORIZONTAL SIDEWALL
WALL
CEILING
4" to 6" (GL8128)
6" to 12" (GL8129)
12" to 18" (GL8174)
CUP
RETAINER
1" x 3/4" REDUCER
1" MIN.
1 3/4" MAX.
1/8"
1/8" MIN.
7/8" MAX.
2 15/16" DIA.
2" DIA. MIN.
HOLE IN WALL
1 29/32" DIA.
4" to 6" (GL8128)
6" to 12" (GL8129)
12" to 18" (GL8174)
CEILING
WALL
CUP
RETAINER
1" x 3/4" REDUCER
2 15/16" DIA.
2" DIA. MIN.
HOLE IN WALL
1 29/32" DIA.
1" MIN.
1 1/2" MAX.
1/8"
1/8" MIN.
5/8" MAX.
CROSS SECTIONS
3/4” ADJUSTMENT 1/2” ADJUSTMENT
NOTE: METRIC CONVERSIONS AREAPPROXIMATE.
1FINISHES AVAILABLE ON SPECIAL ORDER. 2AVAILABLE AS cULus LISTEDAS CORROSION RESISTANT WHEN SPECIFIED ON ORDER.
SPECIFICATIONS AND APPROVALS
SIN STYLE NOMINAL
“K” FACTOR THREAD SIZE LENGTH FINISHES cULus NYC-DOB MEA 101-92-E
GL8128
GL8129
GL8174
HORIZONTAL
SIDEWALL 8.0 (115 metric) 3/4”NPT (20mm) 3” (7.6cm)
Factory Bronze
Chrome
White Polyester2
Black Polyester1,2
XX
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN STYLE
TEMPERATURES MAX. AREA OF
COVERAGE
WIDTH X LENGTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN.
FLOW
G.P.M.
(L/min.)
DEFLECTOR
TO CEILING
DISTANCE
Inches (mm)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C) 155°F (68°C) 175°F (79°C) 200°F (93°C)
GL8128
HORIZONTAL
SIDEWALL
&
RECESSED
HORIZONTAL
SIDEWALL
QR QR QR QR
16 (4.9) x 16 (4.9) 10.3 (.71) 26 (98)
4 (101.6)
to
6 (152.4)
6 (1.8)
16 (4.9) x 18 (5.5) 12.8 (.88) 29 (110)
QR SR --- SR 16 (4.9) x 20 (6.1) 16.6 (1.14) 33 (125)
QR* SR --- --- 16 (4.9) x 22 (6.7) 20.8 (1.43) 37 (140)
QR* SR --- --- 16 (4.9) x 24 (7.3) 26.8 (1.85) 42 (159)
GL8129
HORIZONTAL
SIDEWALL
&
RECESSED
HORIZONTAL
SIDEWALL
QR QR QR --- 16 (4.9) x 16 (4.9) 10.3 (.71) 26 (98)
6 (152.4)
to
12 (304.8)
QR QR QR --- 16 (4.9) x 18 (5.5) 12.8 (.88) 29 (110)
QR SR --- SR 16 (4.9) x 20 (6.1) 16.6 (1.14) 33 (125)
QR* SR --- --- 16 (4.9) x 22 (6.7) 20.8 (1.43) 37 (140)
QR* SR --- --- 16 (4.9) x 24 (7.3) 26.8 (1.85) 42 (159)
GL8174
HORIZONTAL
SIDEWALL
&
RECESSED
HORIZONTAL
SIDEWALL
SR --- --- ---
16 (4.9) x 16 (4.9) 12.0 (.83) 28 (106)
12 (304.8)
to
18 (457.2)
16 (4.9) x 18 (5.5) 14.6 (1.00) 31 (117)
16 (4.9) x 20 (6.1) 18.7 (1.29) 35 (132)
16 (4.9) x 22 (6.7) 20.8 (1.43) 37 (140)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE
SPRINKLERS SHALL BE LIMITEDAS PER THE REQUIREMENTS OF NFPA13 ANDANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR THE NEXT HIGHEST COVERAGE
AREA FOR WHICH HYDRAULIC DESIGN CRITERIAARE STATED.
LISTED FOR USE WITH 1/2” ADJUSTABLE RECESSED CUP.
*

AUG 2018 GFS-210 (Formerly A-43)
THE INCH®
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5603
ONE INCH ADJUSTABLE
FLAT PLATE CONCEALED PENDENT
DESCRIPTION AND OPERATION
SERIES GL-QR/INCH/ECLH
EXTENDED COVERAGE
FLAT PLATE ADJUSTABLE
CONCEALED PENDENT
TECHNICAL DATA
• See reverse side for Approvals and Specications.
• Temperature Rating - 135°F (57°C), 155°F (68°C), 175°F (79°C)
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze • Deector - brass • Screw - brass
• Lodgement Wire - stainless steel • Bulb seat - copper
• Spring - nickel alloy • Seal - teon
• Bulb - glass with alcohol based solution, 3mm size
• Cover Plate - brass • Upper Escutcheon Assembly - steel
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
The Globe GL5603 Extended Coverage One Inch Adjustable Concealed Pendent Sprinkler for Light
Hazard occupancies has a at plate prole that utilizes a 3mm frangible glass ampule as the thermo-
sensitive element. It features economy, aesthetics and the lowest allowable water ow with a nominal 1"
of adjustment for easier installation. The combination of the 3mm frangible glass ampule and specially
designed deector make the GL5603 the ultimate in life safety and re control. It can be installed wher-
ever standard light hazard extended coverage concealed pendent sprinklers are specied. This sprinkler
should be used advisedly and under the direction of approving authorities having jurisdiction, in accor-
dance with their listings and in accordance with NFPA 13.
All that is seen at the ceiling is the 3 5/16" diameter at ceiling plate color nished to match the
specier's exact requirements. The ceiling plate is soldered to the sprinkler's special upper support
assembly in three places. Upon the application of sufcient heat, the plate falls to the oor exposing
the pendent spray sprinkler. At the prescribed temperature the internal pressure within the ampule
exceeds the strength of the glass causing the glass bulb to shatter. This results in water discharge which
is distributed in an approved pattern.
CLASSIFICATION AVAILABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE
135°F/155°F
175°F
57°C/68°C
79°C
ORANGE/RED
YELLOW
100°F
150°F
38°C
66°C
“THE INCH” QUICK RESPONSE EX-
TENDED COVERAGE LIGHT HAZ-
ARD AUTOMATIC SPRINKLERS
GL5603 ONE INCH ADJUSTABLE FLAT
PLATE CONCEALED PENDENT
GFS-210 (Formerly A-43)
GFS-210 (Formerly A-43)

AUG 2018 GFS-210 (Formerly A-43)
“THE INCH” QUICK RESPONSE EXTENDED COVERAGE
LIGHT HAZARD AUTOMATIC SPRINKLERS GL5603 ONE
INCH ADJUSTABLE FLAT PLATE CONCEALED PENDENT
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FINISHES AVAILABLE ON SPECIAL ORDER.
2FOR PAINTED PLATES OTHER THAN WHITE, CONTACT GLOBE FOR ORDERING SPECIFICATIONS.
***FACTORY PAINTED COVER PLATES MUST NOT BE REPAINTED. NON-FACTORY APPLIED PAINT MAY ADVERSELY DELAY OR PREVENT SPRINKLER
OPERATION IN THE EVENT OF A FIRE.
SPECIFICATIONS AND APPROVALS
3 5/16" DIA.
2 3/4" MAX.
1 7/8" MIN.
1/8"
CEILING COVER PLATE
SUPPORT SHELL
CUP
DEFLECTOR
DROP PIN
1" x 1/2"
REDUCER
2 3/8" DIA.
CEILING
2 3/4" DIA. MIN.
HOLE IN CEILING
CROSS SECTION ORDERING INFORMATION
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
F A X 9 8 9 - 8 4 6 - 9 2 3 1
www.globesprinkler.com
9 8 9 - 8 4 6 - 4 5 8 3
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specic details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
• Quantity • SIN • Style
• Orice • Temperature • Finishes desired
• Quantity - Wrenches - P/N 332765
• Quantity - Protective Caps - P/N 332868
1” ADJUSTABLE FLAT PLATE
CONCEALED PENDENT
SPECIFY
THE INCH®
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5603
ONE INCH ADJUSTABLE
FLAT PLATE CONCEALED PENDENT
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA 13 AND ANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR
THE NEXT HIGHEST COVERAGE AREA FOR WHICH DESIGN CRITERIA ARE STATED.
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN NOMINAL
“K” FACTOR
THREAD
SIZE LENGTH
135°F (57°C) Cover Plate 155°F (68°C) Cover Plate
cULus FLAT COVER
PLATE FINISHES***
135°F
(57°C)
Sprinkler
155°F
(68°C)
Sprinkler
155°F
(68°C)
Sprinkler
175°F
(79°C)
Sprinkler
GL5603 5.6 (80 metric) 1/2”NPT
(15mm)
3”
(7.6cm) X X X X X
Chrome
White Painted
Other Painted Finishes1,2
SIN STYLE
SPRINKLER TEMPERATURES MIN. AREA OF
COVERAGE
LENGTH x WIDTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN. FLOW
G.P.M. (L/min.)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C)
155°F
(68°C)
175°F
(79°C)
GL5603 CONCEALED
PENDENT
X X X 16 (4.9) x 16 (4.9) 21.5 (1.48) 26 (98)
8 (2.4)18 (5.5) x 18 (5.5) 34.7 (2.39) 33 (125)
X --- --- 20 (6.1) x 20 (6.1) 51 (3.52) 40 (151)
FLAT COVER
PLATE SIZE
WHITE
135°F (57°C)
PART #
WHITE
155°F (68°C)
PART #
CHROME
135°F (57°C)
PART #
CHROME
155°F (68°C)
PART #
3 5/16” DIA. 332892 332898 332891 332897

MAR 2018 GFS-230 (Formerly A-47)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL5613 & GL8113
CONCEALED
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
SERIES GL-QR/ECLH/DCSW
EXTENDED COVERAGE
CONCEALED
HORIZONTAL SIDEWALL
CLASSIFICATION AVAILVABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE
135°F/155°F
175°F
57°C/68°C
79°C
ORANGE/RED
YELLOW
100°F
150°F
38°C
66°C
The Globe Quick Response GL5613 and GL8113 Extended Coverage Horizontal Sidewall Adjust-
able Concealed Sprinkler for light hazard occupancies, have the lowest prole available for this type of
sprinkler, providing an aesthetically pleasing design. It provides sprinkler operation approximately six
times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers
are specied when allowed by the applicable standards, and in accordance with NFPA 13. The sprinkler
has 1/2” of adjustment for ease of installation. All that is seen on the wall is a 3 5/16” diameter wall plate
color nished to match the speciers exact requirements. In addition to making the sprinkler much less
noticeable, the wall plate assembly also provides protection for the sprinkler from ying or hanging objects.
The heart of Globe’s Model Series GL-QR sprinkler proven actuating assembly is a hermetically sealed
frangible glass ampule that contains a precisely measured amount of uid. The 3mm frangible glass
ampule provides sprinkler operation approximately six times faster than standard response sprinklers,
they can also be installed wherever standard extended coverage horizontal sidewall sprinklers are speci-
ed. The wall plate is soldered to the sprinkler’s special upper support assembly in three places. Upon
the application of sufcient heat, the plate falls to the oor exposing the quick response sprinkler. At the
rated temperature the internal pressure within the ampule exceeds the strength of the glass causing the
glass to shatter. This results in water discharge which is distributed in an approved pattern.
TECHNICAL DATA
• See reverse side for Approvals and Specications.
• Temperature Ratings -
135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate
155°F (68°C) Sprinkler, 135°F (57°C) Cover Plate
175°F (79°C) Sprinkler, 155°F (68°C) Cover Plate
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze • Deector - brass •Screw - brass
• Bulb seat - copper • Spring - nickel alloy • Seal - teon
• Bulb - glass with alcohol based solution, 3mm size
• Cover Plate - brass
• Upper Escutcheon Assembly - steel
QUICK RESPONSE EXTENDED COV-
ERAGE LIGHT HAZARD AUTOMAT-
IC SPRINKLERS MODELS GL5613 &
GL8113 CONCEALED HORIZONTAL
SIDEWALL
GFS-230 (Formerly A-47)
GFS-230 (For-
merly A-47)

MAR 2018 GFS-230 (Formerly A-47)
QUICK RESPONSE EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS GL5613 & GL8113 CONCEALED
HORIZONTAL SIDEWALL
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
F A X 9 8 9 - 8 4 6 - 9 2 3 1
www.globesprinkler.com
9 8 9 - 8 4 6 - 4 5 8 3
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specic details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATION
• Quantity •SIN • Style • Orice
• Thread Size • Temperature •Finishes desired
• Quantity - 5.6K Wrenches - P/N 329678
• Quantity - 8.0K Wrenches - P/N 329679
• Quantity - Protective Caps - P/N 327119
SPECIFY
CROSS SECTION
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FOR PAINTED PLATES OTHER THAN WHITE, CONTACT GLOBE FOR ORDERING SPECIFICATIONS.
2FINISHES AVAILABLE ON SPECIAL ORDER.
***FACTORY PAINTED COVER PLATES MUST NOT BE REPAINTED. NON-FACTORY APPLIED PAINT MAY ADVERSELY DELAY OR PREVENT SPRINKLER
OPERATION IN THE EVENT OF A FIRE.
SPECIFICATIONS AND APPROVALS
SIN NOMINAL
“K” FACTOR
THREAD
SIZE LENGTH
135°F (57°C)
Cover Plate
155°F (68°C)
Cover Plate cULus
NYC-DOB
MEA
101-92-E
DOMED COVER
PLATE FINISHES***
135°F (57°C)
Sprinkler
155°F (68°C)
Sprinkler
175°F (79°C)
Sprinkler
GL5613 5.6 (80 metric) 1/2”NPT (15mm) 2 9/16” (6.5cm)
X X X X X
Chrome
White Painted
Other Painted Finishes1,2
GL8113 8.0 (116 metric) 3/4”NPT (20mm) 2 11/16” (6.8cm)
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN STYLE
SPRINKLER TEMPERATURES MAX. AREA OF
COVERAGE
WIDTH x LENGTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN.
FLOW
G.P.M.
(L/min.)
DEFLECTOR
TO CEILING
DISTANCE
Inches (mm)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F
(57°C)
155°F
(68°C)
175°F
(79°C)
GL5613
CONCEALED
HORIZONTAL
SIDEWALL
X X X
16 (4.9) x 16 (4.9)
26.8 (1.85) 29 (110) 4 (101.6)
to
6 (152.4)
7 (2.1)
16 (4.9) x 18 (5.5)
X --- X 16 (4.9) x 20 (6.1) 32.7 (2.25) 32 (121)
X X X
16 (4.9) x 16 (4.9)
32.7 (2.25) 32 (121)
6 (152.4)
to
12 (304.8)
16 (4.9) x 18 (5.5)
X --- X 16 (4.9) x 20 (6.1)
GL8113
CONCEALED
HORIZONTAL
SIDEWALL
X X X 16 (4.9) x 16 (4.9) 10.3 (.71) 26 (98) 4 (101.6) to 12 (304.8)
6 (1.8)
X X X 16 (4.9) x 18 (5.5) 12.8 (.88) 29 (110)
4 (101.6) to 6 (152.4)
X --- X 16 (4.9) x 20 (6.1) 15.6 (1.08) 32 (121)
X X X 16 (4.9) x 18 (5.5) 15.6 (1.08) 32 (121)
6 (152.4) to 12 (304.8)
X --- X 16 (4.9) x 20 (6.1) 20.9 (1.44) 37 (140)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE
SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA13 AND ANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR THE NEXT HIGHEST COVERAGE AREA
FOR WHICH HYDRAULIC DESIGN CRITERIA ARE STATED.
QUICK RESPONSE
EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS GL5613 & GL8113
CONCEALED HORIZONTAL SIDEWALL
A
A
WALL
CEILING
COVER PLATE
CUP
SUPPORT SHELL
1" x 1/2" REDUCER - 1/2"NPT
1" x 3/4" REDUCER - 3/4"NPT
4" TO 12"
3 5/16"
DIA
3 1/8"
DIA.
2 1/8"
DIA.
2 1/2" DIA. MIN.
HOLE IN WALL
1"
1 1/8" MIN.
1 5/8" MAX.
3 5/16” DIA. DOMED COVER PLATE S/A PART NUMBERS
FINISH 135°F (57°C) 155°F (68°C)
CHROME 329489 329495
WHITE 329491 329497

MAR 2018 GFS-235 (Formerly A-47a)
QUICK RESPONSE
EXTENDED COVERAGE
LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL8114
CONCEALED
HORIZONTAL SIDEWALL
DESCRIPTION AND OPERATION
SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING
SERIES GL-QR/ECLH/DCSW
EXTENDED COVERAGE
CONCEALED
HORIZONTAL SIDEWALL
CLASSIFICATION AVAILVABLE SPRINKLER
TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE
ORDINARY
INTERMEDIATE 135°F 57°C ORANGE 100°F 38°C
TECHNICAL DATA
• See reverse side for Approvals and Specications.
• Temperature Ratings -
135°F (57°C) Sprinkler, 135°F (57°C) Cover Plate
• Water Working Pressure Rating - 175 psi (12 Bars)
• Factory tested hydrostatically to 500 psi (34 Bars)
• Maximum low temperature glass bulb rating is -67°F (-55°C)
• Frame - bronze • Deector - brass • Screw - brass
• Bulb seat - copper • Spring - nickel alloy • Seal - teon
• Bulb - glass with alcohol based solution, 3mm size
• Cover Plate - brass
• Upper Escutcheon Assembly - steel
The Globe Quick Response GL8114 Extended Coverage Horizontal Sidewall Adjustable Concealed
Sprinklers for light hazard occupancies, have the lowest prole available for this type of sprinkler, pro-
viding an aesthetically pleasing design. They can be installed wherever standard extended coverage
horizontal sidewall sprinklers are specied when allowed by the applicable standards, and in accordance
with NFPA 13. The sprinkler has 1/2” of adjustment for ease of installation. All that is seen on the wall
is a 3 5/16” diameter wall plate color nished to match the speciers exact requirements. In addition
to making the sprinkler much less noticeable, the wall plate assembly also provides protection for the
sprinkler from ying or hanging objects.
The heart of Globe’s Model Series GL-QR sprinkler proven actuating assembly is a hermetically sealed
frangible glass ampule that contains a precisely measured amount of uid. At the rated temperature the
internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This
results in water discharge which is distributed in an approved pattern. The wall plate is soldered to the
sprinkler’s special upper support assembly in three places. Upon the application of sufcient heat, the
plate falls to the oor exposing the quick response sprinkler.
QUICK RESPONSE EXTENDED
COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL8114 CONCEALED HORI-
ZONTAL SIDEWALL
GFS-235 (Formerly A-47a)
GFS-235 (Formerly A-47a)

MAR 2018 GFS-235 (Formerly A-47a)
QUICK RESPONSE EXTENDED COVERAGE LIGHT
HAZARD AUTOMATIC SPRINKLERS GL8114 CON-
CEALED HORIZONTAL SIDEWALL
PRINTED U.S.A.
4077 AIRPARK DRIVE, STANDISH, MICHIGAN 48658
F A X 9 8 9 - 8 4 6 - 9 2 3 1
www.globesprinkler.com
9 8 9 - 8 4 6 - 4 5 8 3
1-800-248-0278
GLOBE®PRODUCT WARRANTY
Globe agrees to repair or replace any of its own manufactured
products found to be defective in material or workmanship for a
period of one year from date of shipment.
For specic details of our warranty please refer to Price List
Terms and Conditions of Sale (Our Price List).
ORDERING INFORMATION
• Quantity •SIN • Style • Orice
• Thread Size •Temperature •Finishes desired
• Quantity - Wrenches - P/N 329679
• Quantity - Protective Caps - P/N 327119
SPECIFY
CROSS SECTION
NOTE: METRIC CONVERSIONS ARE APPROXIMATE.
1FOR PAINTED PLATES OTHER THAN WHITE, CONTACT GLOBE FOR ORDERING SPECIFICATIONS.
2FINISHES AVAILABLE ON SPECIAL ORDER.
***FACTORY PAINTED COVER PLATES MUST NOT BE REPAINTED. NON-FACTORY APPLIED PAINT MAY ADVERSELY DELAY OR PREVENT SPRINKLER
OPERATION IN THE EVENT OF A FIRE.
SPECIFICATIONS AND APPROVALS
SIN NOMINAL
“K” FACTOR
THREAD
SIZE LENGTH
135°F (57°C) Cover Plate cULus NYC-DOB MEA
101-92-E
DOMED COVER
PLATE FINISHES***
135°F (57°C) Sprinkler
GL8114 8.0
(115 metric)
3/4”NPT
(20mm)
2 11/16”
(6.8cm) X X X
Chrome
White Painted
Other Painted Finishes1,2
cULus LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS ONLY
SIN STYLE
SPRINKLER
TEMPERATURE MAX. AREA OF
COVERAGE
WIDTH x LENGTH
Feet (Meters)
MIN.
PRESSURE
P.S.I. (bars)
MIN. FLOW
G.P.M. (L/min.)
DEFLECTOR
TO CEILING
DISTANCE
Inches (mm)
MIN. DISTANCE
BETWEEN
SPRINKLERS
Feet (Meters)
135°F (57°C)
GL8114
CONCEALED
HORIZONTAL
SIDEWALL
X
16 (4.9) x 22 (6.7) 19.8 (1.37) 36 (136)
4 (101.6) to 6 (152.4)
6 (1.8)
16 (4.9) x 24 (7.3) 23.2 (1.60) 39 (148)
X
18 (5.5) x 20 (6.1) 19.8 (1.37) 36 (136)
4 (101.6) to 12 (304.8)
18 (5.5) x 22 (6.7) 24.4 (1.68) 40 (151)
NOTE: METRIC CONVERSIONS ARE APPROXIMATE
SPRINKLERS SHALL BE LIMITED AS PER THE REQUIREMENTS OF NFPA13 AND ANY OTHER RELATED DOCUMENTS.
FOR COVERAGE AREA DIMENSIONS LESS THAN OR BETWEEN THOSE INDICATED, USE THE MINIMUM FLOW FOR THE NEXT HIGHEST COVERAGE
AREA FOR WHICH HYDRAULIC DESIGN CRITERIA ARE STATED.
QUICK RESPONSE
EXTENDED COVERAGE LIGHT HAZARD
AUTOMATIC SPRINKLERS
GL8114
CONCEALED HORIZONTAL SIDEWALL
A
A
B
B
WALL
CEILING
COVER PLATE
CUP
SUPPORT SHELL
1" x 3/4" REDUCER
4" TO 12"
3 5/16"
DIA
3 1/8"
DIA.
2 1/8"
DIA.
2 1/2" DIA. MIN.
HOLE IN WALL
1"
1 1/8" MIN.
1 5/8" MAX.
3 5/16” DIA. DOMED COVER PLATE
S/A PART NUMBERS
FINISH 135°F (57°C)
CHROME 329489
WHITE 329491