Globus Magnum XL PRO User manual

Rev.3 12.11.2020 1

Rev.3 12.11.2020 2

Rev.3 12.11.2020 3
DEAR CUSTOMER
THANK YOU FOR CHOOSING A GLOBUS PRODUCT. WE REMAIN AT
YOUR DISPOSAL FOR ANY ASSISTANCE OR ADVICE YOU MAY NEED
DOMINO s.r.l.
via Vittorio Veneto 52
31013 - Codognè - TV - Italy
Tel. [phone]
Fax. [phone]
e-mail: [email protected]
www.globuscorporation.com
The device has been manufactured in compliance with applicable technical
standards and has been certified, in compliance with Directive 93/42/EEC as
amended by directive 2007/47 on medical devices, by the Notified Body
Kiwa Cermet Italia, Via Cadriano 23, 40057 Granarolo Dell’Emilia (BO) Italy (n.
0476), in order to ensure product safety.

Rev.3 12.11.2020 4
Table of contents
TECHNICAL FEATURES ..................................................................................................... 6
Device.............................................................................................................................. 6
Power Supply................................................................................................................... 6
EQUIPMENT ...................................................................................................................... 6
Accessories description ................................................................................................. 7
INTENDED USE ................................................................................................................ 10
INSTRUCTIONS FOR THE USE OF THE WATER-PROOF CASE........................................ 10
CONNECTIONS.............................................................................................................. 11
Device............................................................................................................................ 11
Accessories (connect the solenoids with a Y cable)............................................... 11
LABELLING AND SYMBOLS............................................................................................ 11
Device............................................................................................................................ 13
DASHBOARD AND KEYBOARD..................................................................................... 13
Display/Interface .......................................................................................................... 14
ALARMS.......................................................................................................................... 14
Compliance .................................................................................................................. 14
Open Circuit.................................................................................................................. 14
WARNINGS AND CONTRAINDICATIONS..................................................................... 15
Mandatory Behavior .................................................................................................... 15
Warnings Before the Use.............................................................................................. 15
Warnings During the Use.............................................................................................. 16
Side Effects .................................................................................................................... 16
MAINTENANCE AND CLEANING.................................................................................. 17
Maintenance and Cleaning of the Device and the Diffusers................................ 17
Disposal of the device ................................................................................................. 17
INSTRUCTIONS FOR USE................................................................................................. 18
Turning on/off ................................................................................................................ 18
Homepage.................................................................................................................... 18
EASY PROGRAM............................................................................................................ 18
PROGRAM LIST............................................................................................................... 20

Rev.3 12.11.2020 5
ADVANCED ................................................................................................................... 22
ACTION PRINCIPLE AND APPLICATION METHODS..................................................... 26
What Is Magnetotherapy ............................................................................................ 26
Effects of Magnetotherapy......................................................................................... 27
General Application Methods .................................................................................... 28
HOW TO PLACE THE SOLENOIDS ................................................................................. 31
INDICATIONS ABOUT PROGRAMS ............................................................................... 32
PROGRAM LIST............................................................................................................... 34
WARRANTY CONDITIONS ............................................................................................. 36
EMC accompanying documents............................................................................... 39

Rev.3 12.11.2020 6
TECHNICAL FEATURES
Device
Size: 160x99x35,4 mm
Weight: 404 g
Protection level: IP 20 + IP 02
Storage and transport conditions
The storage and transportation of the device and its accessories, in their original
packaging, are subject to the following limits:
Storage and transportation temperature: From -25°C to 70°C
Max. relative humidity: 0% -93%
If the accessories are not stored into the original package, please comply with
the storage conditions of the single products.
Use conditions
Temperature: from 0°C to 35°C
Maximum relative humidity: from 15% to 93%
Atmospheric pressure: from 700 hPa to 1060 hPa
Magnetic intensity that can be emitted with flexible diffusers
200 Gauss on average per channel
400 Gauss on average on the whole (for 2 channels)
Output channels for solenoid connection: 2 channels
Adjustable frequency: from 5 to 200 Hz
Power supply
Brand: GLOBTEK
Model: GTM41060-2512
PRI: 100-240Vac 50-60Hz Max 0.6A
SEC: 12V 2.08A
Polarity:
EQUIPMENT
The Magnetotherapy device equipment includes the diffuser; therefore, please
check that the package contains the complete equipment.
If some elements are missing, contact your authorized retailer immediately.
Check that the device and the diffuser are intact.
- 2 diffusers (see table 1 with different configurations)

Rev.3 12.11.2020 7
- Power supply (see technical features)
- Operating manual
- Device and waterproof case IP 02
- Magnum test
- Carrying bag
The device can be used with some optional accessories. To purchase these
accessories, please contact your dealer.
CODE MODEL SOLENOIDS
G3956 MAGNUM XL PRO 2 flexible solenoids
G4278 MAGNUM XL PRO (SOFT SOL.) 2 single SOFT solenoids
G6033 MAGNUM XL PRO (SOL.P.PRO) 2 Pocket Pro solenoids
Table 1
Magnum Test
The Magnum Test is used to check that the solenoids work properly. Connect the
solenoid to the device, start a program, put the box upon a coil and check that
a vibration is felt.
Accessories description
Magnum devices can be used with some optional accessories.
G0699 Battery pack (Ni-MH 7.2 V 1.8 Ah): if you purchase the optional battery pack,
you'll be able to make the device operate for a short period without connection to the
mains.
G4275 Single soft solenoid
Soft and comfortable 1-turn solenoid, easily cleanable and sanitizable fabric. Size 12x12
cm.

Rev.3 12.11.2020 8
G1407 Flexible solenoid
Flexible solenoid with two coils, made by comfortable cotton fabric, with elastic central
insert to facilitate positioning on the different anatomical areas. Size 30x10 cm.
G5988 Pocket Pro Solenoid
Solenoid consisting of two coils inserted in a soft pad and stored inside a zip-up case
that is easily washable and sanitized (see chapter on maintenance and cleaning).
Dimensions 15,5x9,5 cm
G4276 Soft mat 4
Soft and comfortable two-channel mat, made up of 4 total spires, whose material is
easy to clean and sanitizable. It is ideal for lumbar applications, in the hips, feet and
hands.
Size 25x25 cm

Rev.3 12.11.2020 9
G1408 Flexible solenoid
It contains 4 coils all north-oriented towards the same side, particularly suited to cover a
vast surface, such as the back or the femur.
Size 40x15cm
These solenoids can be used individually by placing them directly on the treatment
area or, by purchasing two, they can be used in opposed mode.
G4277 Magneto splitting cable
With this accessory, you can split the channels by using, for example, 2 single SOFT
solenoids on the same channel or two rigid solenoids or two flexible solenoids.
Warning: the y cable only works by connecting solenoids of the same type.
Mats
G5944 100 Memory Foam Mat: the new Globus mat with a double layer of Memory
Foam and 4 solenoids inside. It's particularly suited for long treatments during which the
user, though remaining in contact with the mat, is free to move without being tied to
the device through the traditional solenoids.

Rev.3 12.11.2020 10
Total body memory Foam : the new mat with two layers of Memory Foam, composed
of four sections, each of which can contain up to 4 solenoids. The Memory Foam B-
Mat memory is positioned above the traditional mat and it is particularly suitable for
treatments during the night or for people with motor difficulties and bedridden. The
Total body Memory Foam Mat is available in different versions:
G5947 Total Body 200 Memory Foam Mat: 2 of 4 active mats, total number of solenoids: 8
G5948 Total Body 400 Memory Foam Mat: 4 of 4 active mats, total number of solenoids: 16
For further information, visit our website www.globuscorporation.com.
In order to purchase these accessories, please contact your dealer.
INTENDED USE
The product has an estimated usable life of 5 years. We recommend returning the
device to the manufacturer and/or authorized center every 2 years for maintenance
and safety checks.
Magnum XL Pro was designed to be used in the following operating environments:
- domestic environment;
- clinics;
- physiotherapy centers;
- rehabilitation in general;
- pain treatments in general;
- for aesthetic and sport purposes;
The use of this equipment is allowed to the patient (appropriately informed of the
conditions of use of the apparatus) and the medical staff.
CE0476 does not refer to non-medical treatments.
INSTRUCTIONS FOR THE USE OF THE WATER-PROOF CASE
To ensure the IP 22 water-proof level in home use, put the device into the water-proof
case included in the equipment. Then pressure-close the zip and let the cables come
out of the upper corner of the case. Use a twist tie to seal the closure on the corner.
Complete the insertion as in the picture below.

Rev.3 12.11.2020 11
CONNECTIONS
Device
Magnum XL PRO operates connected to the mains. To connect the power supply to the
connector, plug it as shown below.
Warning: If the case, the cable or the connector of the power supply show signs of wear
or damage, replace the product instantly.
Connect the diffusers
To connect the diffusers to the device, plug the connectors to the specific inlets in the
upper part of the unit (see picture). Cables should be inserted with grooves downwards.
Accessories (connect the solenoids with a Y cable)
The Y cable allows to connect 2 diffusers of the same type to one output of the
machine. The power established for the treatment will be divided between the two
diffusers; the value of the emitted field displayed on-screen will be the actual field
emitted by the 2 diffusers. It is possible to use a single Y cable on each output channel
of the machine.
Plug the connectors of each one of the two diffusers into the inlets of the Y cable. Plug
the connector of the Y cable into the specific output slot of the channel you want to
use.
WARNING: do not unplug the solenoids (diffusers) if the unit is operating.
LABELLING AND SYMBOLS
It refers to the manufacturer
Warning: the applied parts can reach temperatures that
may cause redness or burns.

Rev.3 12.11.2020 12
Keep the device dry
This symbol on your device indicates that it complies with
the requirements of the directives on medical devices
(93/42/EEC 47/2007EEC). The number of the notified body
is 0476.
It indicates that this is a class II device.
It indicates that this device has BF-type applied parts.
WEEE symbol (Waste of Electrical and Electronic
Equipment). Recycling symbol.
The WEEE symbol used for this product indicates that the
product cannot be treated as a household waste. The
proper disposal of the product will contribute to
protecting the environment. For further information on the
recycling of this product, please contact the concerned
office of your local body, the household waste
management company or the store where the product
was purchased.
It indicates that the product has been produced in
compliance with the directive 2011/65/EEC.
It indicates the optimal temperature for the storage and
transportation of the product.
It informs the operator that it is compulsory to read the
manual before using the device.
IP20-IP02 It indicates water protection
It informs the client of the compulsory behavior
It indicates the pressure of the environment in which the
device and the accessories are transported and stored.
It indicates the humidity of the environment where the
device and the accessories are used and stored.
Model It indicates the power supply model
PRI Output electric features of the power supply
SEC Output electric features of the power supply

Rev.3 12.11.2020 13
Input power Input electric features of the device
Output freq.
It indicates the frequency range of the magnetic field
emitted by the device
Output power It indicates the maximum magnetic field emitted by the
device
Type It indicates the device type
Device
The image is just for indication. For technical data see the first chapter.
DASHBOARD AND KEYBOARD
ON/OFF/OK Button It confirms the selection. While a program is running, it
activates the pause.
3” = On/Off.
Back/left button Moves the selection to the left.
To go back to the previous selection.
If pressed for 3'' while the program is running, it returns to
Increase/Decrease
Buttons
Function Button
Left/Back
Button
P- Button
* Button
Right/Forward
Button
On/Off/Ok Button
P+ Button
Increase/Decrease
Buttons
Input PWR: GTM41060-2512 IP20
PRI:
100-240Vac 50-60Hz Max 0,6A
SEC:
12Vdc 2,08A
Output Freq.: 5 – 200Hz
Output Power: 200 Gauss
Magneto: MAGNUM XL PRO
*MJ0431700001*
SN: MJ0431700001
P- Button

Rev.3 12.11.2020 14
)







the previous selection.
P+ Button Moves the selection upwards.
P- Button Moves the selection downwards.
Forward/right button Moves the selection to the right.
If pressed for 3'' while the program is running, it goes to the
next phase.
* Button Display peak Gauss emitted by the machine
Function (fn) Button To adjust treatment duration (see use instructions
paragraph)
Increase-decrease
buttons
They change treatment parameters
To regulate the Gauss value of the magnetic field
Display/Interface
ALARMS
Compliance
Certifications: CE MDD certificate
Acoustic signals comply with directive 60601-1-8.
Open circuit
The device is equipped with a power-emission control system.
Before starting any treatment, it is therefore necessary to ensure that the diffuser
is connected to the device and placed on the area to be treated.
Type of power
supply
Program
name
Duration
Power in Gauss
Indicators of
emission
Solenoid 1 Solenoid 2
FRACTURES
TIME GAUSS
50G1h:00m
2
1

Rev.3 12.11.2020 15
Correct emission of power The treatment proceeds
correctly.
Cable not connected Check that the cable is
connected to the right output.
Device in pause mode Press OK to continue the
treatment.
NOTE:
If the unplugged cable message appears, verify that the device, the cables and the
diffuser are intact and correctly used.
If the problem persists, please contact the customer care.
WARNINGS AND CONTRAINDICATIONS
Mandatory behavior
To ensure maximum safety, the device must be used respecting the rules and the
limitations indicated by the user manual.
If the packaging, the cable or the connector of the power supply unit show signs of
wear or damage, replace them instantly.
Before connecting the device to the mains by its power supply, ensure that the building
wiring complies with the directives in force in your country. Make sure that the power
supply will be easily unplugged from the mains.
The manufacturer declines any responsibility for any use that differs from what is
indicated and prescribed in this manual.
The full or partial reproduction in any form and by any electronic or mechanical means
of the texts and/or pictures contained in this manual without the written authorization of
the manufacturer is forbidden.
INSTRUCTIONS BEFORE USE
Consult your family doctor before use.
Do not use MagnetoVet combined with other electronic devices, especially if they
maintain vital functions. Read the tables at the end of the present handbook for a
correct use of MagnetoVet 100. If the device is used nearby or on other devices, make
sure it works properly.
- It is recommended to read carefully the entire operating manual before using the
device; keep carefully this operating manual.
-The unit must be used only with the diffusers provided with the original equipment
(Globus brand) and according to the therapeutic modalities described in this manual.
- Before each use always check the integrity of the device. This is a fundamental
requirement for carrying out the therapy; do not use the device if the buttons or the
cables are defective or malfunctioning.

Rev.3 12.11.2020 16
The device:
It must be used only by people over 18 or applied on subjects from the age of 15 under
the supervision of people aged less than 18 years and, in any event, who are able to
understand and take action.
- it must be used following the indications and under the physician’s or physiotherapist’s
control;
- It must be kept out of the reach of children;
- if there is any health problem, it must be used only after seeing a physician;
- once you have turned the device on, make sure that on the display the software
version and the
model of the device appear, it means that the device is working and it is ready to be
used;
Otherwise, if not all the segments appear on the monitor, shut down the device and
restart it. If the problem persists, contact the customer service and do not use the
device.
Indications during use
The device is intended for continuous functioning.
While using Magnum XL Pro some warnings should be followed:
- in the case of damaged cables, they must be replaced with original parts and not
used anymore;
- the device must be kept out of the reach of any pet that could damage it and
contaminate it with parasites;
- the cables of the device, the diffusers and the power supply should not be wrapped
around people's neck to avoid any risk of strangulation and suffocation;
- the mobile and fixed radio communication devices could influence the functioning of
the electromedical device: see the tables attached to this manual.
- during the use the temperature of the diffusers can rise and cause an unpleasant
sensation, redness or irritation. We suggest to:
- consult the doctor;
- put a sponge cloth (towel) in between;
- reduce the power emitted and prolong the treatment.
Side effects
It has been pointed out: general intolerance to magnetic fields therapy such as
sleepiness, restlessness, insomnia and nausea. According to our experience these effects
are extremely rare and were mainly observed during the treatment of the cervical spine.
In case of onset of the events, avoid sessions longer than 30 consecutive minutes.
Contraindications
Absolute contraindication: treatment of patients with cardiac pacemakers or other
permanent (e.g. vertebral) electrostimulators.
Contraindications:
- patient with cardiac rhythm disorders;
- dermatitis and fungal infections;

Rev.3 12.11.2020 17
- hemorrhagic tendency;
- severe ischemic diseases;
- during the menstrual cycle if particularly abundant;
- this treatment is not indicated for pregnant women, wearers of electrical prosthesis,
hearing aids and intrauterine devices;
- do not carry out this treatment together with TENS and/or HOLTER;
- do not use in areas with metal prosthesis (screws, nails, etc..) made of ferromagnetic
material and in areas with means of magnetizable endotissue synthesis. If you have any
doubt, see your physician;
- do not use on children under fifteen;
- do not use on noble organs (ovaries, heart, head, etc.);
- do not use in the case of fever;
- in the case of tumor diseases it is necessary to see your physician or oncologist before
using magnetotherapy;
- in the case of severe imbalances of blood pressure;
- do not use in the case of tuberculosis
MAINTENANCE AND CLEANING
Maintenance and cleaning of the device and the diffusers
- In case of actual or alleged malfunctioning, do not tamper with the device and do not
try to repair it by yourself.
Do not intervene on the device and do not open it. Only specialized and authorized
centers can repair it.
- Avoid violent impacts that may damage the device and cause malfunctioning, also
not immediately detectable.
Use this device in a dry environment and in an open space (not wrapped in any
material).
- Always use the device and the accessories with clean hands.
- It is recommended to use the device and the accessories in a clean environment to
avoid contamination with dust and dirt.
- It is recommended to use the device in a ventilated, well-aired space.
- It is recommended to clean/disinfect the parts after every use, unless otherwise
indicated.
Disposal of the device
Do not throw the device or parts of it into the fire; dispose of the product in the
specialized centers and respecting the regulations in force in your country.
When the product has to be disposed of, the user can give it back to the retailer when
purchasing a new device.
Correct waste separation or following the above-mentioned procedure contribute to
avoiding possible negative effects on environment and health and promote the reuse
and/or recycle of the materials that compose the device. The illegal disposal of the
product entails the application of administrative fines in accordance with applicable
regulations.

Rev.3 12.11.2020 18
MagnumXLPro
EasyProgram
ProgramList
Advanced
USER MANUAL
Turning on/off
To turn on or off, press and hold OK until the acoustic signal is heard.
Homepage
Use P+ and P- to make the selection and press OK to confirm your choice.
EASY PROGRAM
This function allows to start a magnetotherapy treatment in few simple clicks.
The parameters can be edited quickly by pressing the increase and decrease buttons
placed below each parameter.
To start the treatment, just connect the solenoids and press OK.
At the first start, the program is set with the parameters of a generic anti-inflammatory
program.
PROGRAM LIST
EASY PROGRAM ADVANCED
TURNING ON
Press OK to start the
treatment

Rev.3 12.11.2020 19
EDITING THE PARAMETERS QUICKLY ON EASY PROGRAM
To change the Gauss, the frequency and the duration of the therapy, use the first three
pairs of increase/decrease buttons (highlighted in yellow in the picture below). Each
button edits the corresponding parameter on the screen
.
The new parameters will remain in memory even when the machine is turned off or the
page is quit by pressing the back button:
This allows an easy setting of the parameters indicated, for example, by the physician.
After the first setup, every time the device is turned on, the treatment can start in two
clicks.
SAVING A PROGRAM QUICKLY FROM THE PROGRAM LIST TO EASY
PROGRAM
If the user needs to carry out a pre-set program (for example back pain), but the
doctor has prescribed a duration and/or a power that is different from the pre-set one,
follow these steps:
After choosing the program, press back to go to the starting menu and select Easy
Program. Edit the parameters and make the treatment. The edited program will be
always available on Easy Program.
EasyProgram

GAUSS
15G

FREQ
75Hz

TIME
3h:00m
2
1
SELECT BACK PAIN PROGRAM
PROGRAM LIST
TURNING ON
SAVE TO EASY PROGRAM

Rev.3 12.11.2020 20
PROGRAM LIST
Use P+ and P- to select the program and press OK to confirm your choice.
START PROGRAM
To start the program confirm your choice by pressing OK. You will see on your display the
program name, the connected solenoids, the total time of the treatment and the
emitted Gauss.
Important: the Gauss value refers to the intensity emitted for each channel and each
coil. Therefore, if a 2-coil flexible solenoid is connected, the total emitted value must be
multiplied by 2.
How to pause/stop the program
To pause the program, press OK. Press OK again to go back to the program execution.
During the pause, pause icons appear on the screen. To stop the program in advance,
hold down OK until you hear a continuous beep.
Press OK to start the program
Overwrite the program saved to
“Easy Program”
Set the NUMBER OF SESSIONS and
save by pressing OK
START
SAVE TO EASY PROGRAM
SAVE FOR RENTAL
PROGRAM LIST ADVANCED
TURNING ON
EASY PROGRAM
SELECT PROGRAM
2
1
Arthrosis

GAUSS
15G

TIME
3h:00m
2
1