Gocontrol 2GIG-CP2 User manual

Wireless Security System
User’s Guide
WARNING: Owner’s Instruction Notice
Not to be removed by anyone except occupant
2GIG-CP2

Congratulations on your ownership of a Go!Control Security System!
This wireless system offers protection for your property against burglary,
protection for yourself and family with 24-hour emergency monitoring, and
optionally fire detection for your home.
The heart of the system is the Control Panel. It receives the wireless radio
signals from remote system “sensors” that monitor doors, windows, motion
detectors, smoke detectors, carbon monoxide detectors, and panic buttons.
The Control Panel processes these signals and controls the alarm siren.The
system can communicate to an alarm monitoring “Central Station” over the
regular telephone network and optionally over the cellular telephone network
to report violations, alarms, and system status.
The Control Panel is operated using its color touch screen display that shows
easy-to-identity buttons and icons. The system can be armed or disarmed
directly at the Control Panel, or by using optional key fob remote controls,
remotely over the telephone, or over the Internet with Web access (if enabled
by your installer). The Control Panel displays helpful information regarding
the system and sensor status, system and alarm history, and trouble alerts.
Being fully “supervised”, the Go!Control Security System continuously
monitors itself and its sensors. If an issue occurs, such as a low sensor
battery, the trouble alert will be displayed and logged by the Control Panel
and optionally reported to the Central Monitoring Station. This way, the
trouble can be addressed and corrected promptly, maintaining the integrity
of the system.
With the system’s built-in Z-Wave home automation capability, you can
control your Z-Wave enabled household appliances and door locks from the
Control Panel or remotely from a PC and the Internet from anywhere in the
world... even through your cell phone! (This is an optional feature, check with
your security professional for availability with your system.)
Many insurance companies offer discounts on homeowners and renters
policies when a security system is installed. Discount credits vary with
different companies and generally increase in savings with an increase in the
level of protection. Ask your insurance agent about savings available to you.
The Go!Control Security System

1
Table of Contents
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Sensor Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fire Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Burglary Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
User Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Trouble Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Control Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wireless Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Main Display Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Security Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arming Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Menu Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Burglary Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operating the System . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sensor Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Checking that All Sensors are Closed . . . . . . . . . . . 8
Viewing Each Sensor’s Status . . . . . . . . . . . . . . . . . . 8
Sensor Bypassing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Force Bypassing Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Manual Bypassing or Un-bypassing Sensors . . . . . . . . . . 9
Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Entry Delay in Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Quick Exit in Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Silent Control in Stay Mode. . . . . . . . . . . . . . . . . . . . . . . . . 10
Arming to Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Away Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Exit and Entry Delays in Away Mode. . . . . . . . . . . . . . . . . 12
Exit Delay Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Silent Control in Away Mode. . . . . . . . . . . . . . . . . . . . . . . . 12
Quick Exit in Away Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Auto Stay Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Arming to Away Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disarming the System . . . . . . . . . . . . . . . . . . . . . . . . .14
Disarming from Stay Mode . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disarming from Away Mode . . . . . . . . . . . . . . . . . . . . . . . . 14
If a Burglary Alarm Occurs. . . . . . . . . . . . . . . . . . . . .15
Burglary Alarm Siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Alarm Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Optional 2-Way Voice Communications . . . . . . . . . . . . . . 15
Key Fob Arming and Disarming . . . . . . . . . . . . . . . . .16
Key Fob Arming to Stay Mode . . . . . . . . . . . . . . . . . . . . . . 16
Key Fob Arming to Away Mode . . . . . . . . . . . . . . . . . . . . . 16
Key Fob Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Key Fob Emergency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Key Fob Auxiliary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Wireless Keypad Arming and Disarming . . . . . . . . .17
Wireless Keypad Arming to Stay Mode . . . . . . . . . . . . . . 17
Wireless Keypad Arming to Away Mode . . . . . . . . . . . . . 17
Wireless Keypad Disarming . . . . . . . . . . . . . . . . . . . . . . . . 17
Wireless Keypad Fire Emergency . . . . . . . . . . . . . . . . . . . 17
Wireless Keypad Police Emergency . . . . . . . . . . . . . . . . . 17
Fire Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Fire Alarm System . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Manual Fire Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Automatic Fire Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Silencing a False Fire Alarm . . . . . . . . . . . . . . . . . . . . . . . . 18
Recommended Smoke Detector Locations . . . . . . .19
Emergency Evacuation Plan. . . . . . . . . . . . . . . . . . . .20
Emergency Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
24-Hour Emergency Buttons . . . . . . . . . . . . . . . . . . .21
Panic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Emergency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
System Trouble Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Trouble Alert Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Nighttime Trouble Alert Holdoff . . . . . . . . . . . . . . . . .22
System Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
AC Power Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Phone Line Failure Icon. . . . . . . . . . . . . . . . . . . . . . . .23
Backup Battery Status Icon . . . . . . . . . . . . . . . . . . . .23
Test Mode Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Remote Installer Access Icon . . . . . . . . . . . . . . . . . .23
Radio Modem Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Interior Sensor Open Icon . . . . . . . . . . . . . . . . . . . . .23
Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
System Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . .24
Reading Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reading Confidential Messages. . . . . . . . . . . . . . . . . . . . . 25
Filtering Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Sorting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Remote Control by Telephone . . . . . . . . . . . . . . . . . . . . . . . 26
Telephone Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Calling the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Bypassing Sensors Remotely . . . . . . . . . . . . . . . . . . . . . . . 27
System Toolbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
User Management . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
User Code Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adding a User Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
User Code Access Schedules . . . . . . . . . . . . . . . . . . . . . . 29
Adding or Editing User Access Schedules. . . . . . . . . . . . 29
Recurring User Access Schedule . . . . . . . . . . . . . . . . . . . 30
Single Date User Access Schedule. . . . . . . . . . . . . . . . . . 30
Date Range User Access Schedule. . . . . . . . . . . . . . . . . . 31
Deleting User Access Schedules. . . . . . . . . . . . . . . . . . . . 31
Changing a User Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Deleting a User Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Duress User Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the Duress User Code. . . . . . . . . . . . . . . . . . . . . . . 33
Secret Duress Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
System History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
System Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Sensor Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Panel Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Telephone Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Cell Phone Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Chime Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Brightness / Volume. . . . . . . . . . . . . . . . . . . . . . . . . . .39
Backlight Timeout. . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Display Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Touch Screen Calibration . . . . . . . . . . . . . . . . . . . . . .40
Set Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Display Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Installer Set Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Siren Run Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Fire Horn Run Time. . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Exit Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Entry Delays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
24-Hour Emergency Functions. . . . . . . . . . . . . . . . . .43
Quick Arming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Quick Bypass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Quick Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Auto Un-bypass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Auto Stay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Key Fob Arm/Disarm Sound . . . . . . . . . . . . . . . . . . . .44
Key Fob Disarm After Alarm Sound. . . . . . . . . . . . . .44
Exit Delay Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Cancel Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Cancel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Dialer Delay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
2-Way Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Telephone Remote Control Answer. . . . . . . . . . . . . .45
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Wireless Product Notice. . . . . . . . . . . . . . . . . . . . . . .46
FCC Part 15 Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
FCC Telephone Rules and Regulations . . . . . . . . . . .46
FCC Part 68 Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Industry Canada Notice (for Canadian users). . . . .48
Service Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Important Power Supply Notice . . . . . . . . . . . . . . . .49
Important Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alarm System Limitations . . . . . . . . . . . . . . . . . . . . . .50
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

2
System Overview
General Information
This system provides three forms of protection: burglary, fire, and emergency,
depending on the options set by the installer. The system consists of the
Control Panel with a color touch screen, wireless sensors that provide
perimeter and interior burglary protection, and wireless smoke and carbon
monoxide detectors. In addition, optional remote control key fobs, wireless
panic pendants, and wireless keypads may have been provided or installed.
The system monitors all protection “zones” and the system’s status. It will
display monitoring information and control the alarm siren.Your system may
also have been setup to send alarm and status reports to a Central Monitoring
Station and has the capability for 2-way voice communications with the alarm
monitoring operator.
Features
Following is a list of standard features and options that can be included in
your system. Ask your installer which options are available to you and check
the boxes that apply.
✓STAY and AWAY arming modes. Stay Mode arms the system perimeter only and
is used typically at night when the premises are occupied. Away Mode arms the
system perimeter and interior; it’s used when the premises are unoccupied.
✓Eight user-unique 4-digit codes to operate the system. The system supports one
“Master User Code” that can assign and maintain the other seven User Codes.
✓One of the eight User Codes functions as a Duress User Code. Controlling the system
with this code gives the appearance of normal operation, but using it secretly sends a
“duress” report to the Central Monitoring Station to initiate a silent alarm call for help.
✓Voice announcements from the Control Panel. The system has a large vocabulary
of descriptive words that can be assigned to sensors so each will have a unique
announcement such as “front door” or “baby’s room window” if desired.
✓Home automation with the built-in Z-Wave controller for remote
controlling Z-Wave enabled home appliances (optional feature).
✓Alarm history with system event log. Each alarm and system alert is logged
into the system’s memory. These events can be displayed and reviewed at
the Control Panel or remotely by the Central Monitoring Station.
✓Real time clock and calendar shows on the system’s display
and is used to time stamp items in the event log.
❑2-way voice communication. After an alarm, the system can automatically connect
with a Central Station operator so they can converse with people in the premises.
❑Remote control of the system over the telephone.
❑Remote control of the system using a Web-enabled device through
the Internet (requires GSM cellular radio option).
❑Three optional 24-hour emergency functions: PANIC, FIRE, and EMERGENCY.
These functions can be activated by buttons on the Control Panel, using wireless
sensors, from the wireless keypad, or from portable pendant devices.

3
System Overview
General Operation
Following are general operational concepts that your system supports.
Understanding these concepts will help you to use your security system to
it fullest extent.
Sensor Types
The system’s wireless sensors have been assigned to selected “types” (sometimes called “zones”
in the alarm industry). The sensor type determines how and when the system will react to a signal
from the sensor. Some sensors are armed 24 hours a day, other sensors are only armed when the
system is armed.
Fire Protection
If fire protection wireless smoke detectors have been installed in your system, they are armed 24
hours-a-day. They will sound an alarm when smoke is detected and can report the fire alarm to the
Central Monitoring Station. Refer to the Fire Alarm System section of this manual for important
emergency planning and evacuation information.
Burglary Protection
Burglary protection is provided by perimeter and interior sensors. When the system is armed in the
Away Mode, both perimeter and interior sensors are armed and can trigger an alarm. When the
system is armed in the Stay Mode, only the perimeter sensors are armed and can trigger an alarm.
Both arming modes offer an “Exit Delay” that allows time to leave the premises without triggering
the alarm. Upon re-entry, the system offers an “Entry Delay” through certain points of protection that
allows you time to disarm the system before an alarm is triggered.
Sensors can be set to sound a chime and/or a voice announcement when they are triggered. So you
can monitor your doors and windows while the system is disarmed.
User Codes
The system installer has pre-programmed a Master User Code for your system. This code can be used
to control the system as well as assign and change the other seven User Codes. The Master User
Code can also access several system setup settings in the User Toolbox.
Alarms
When an alarm occurs, the Control Panel’s siren and an external siren (if installed) will sound for a
preset time. During alarms and after disarming, the alarm history button will display all the alarms
that have occurred, and which sensors were involved. The alarm history clears the next time the
system is armed or can be cleared manually.
Messages
Your security system supports receiving messages from the Central Monitoring Station. The
messages can be about system upgrades, additional services, special regional weather alerts, etc.
Trouble Alerts
The system monitors itself for abnormal operating conditions and will alert you if trouble is detected.
Trouble conditions can be reported to the Central Monitoring Station.

4
Control Panel Features
ALARM SOUNDER
AND SPEAKER COLOR DISPLAY
WITH TOUCH SCREEN
MICROPHONE
EMERGENCY
BUTTON / INDICATOR
HOME
BUTTON / INDICATOR
Lights WHITE when enabled for emergency alarms
Blinks WHITE during emergency alarm
Lights GREEN when ALL sensors are closed (ready to arm)
Not lit when ANY sensor is open (not ready to arm)
Lights RED while system is armed
Blinks RED during the Entry Delay
Blinks RED during an alarm
Blinks RED after an alarm while system is still armed
Indicator flashes during power outages
(system on battery backup)
Flashes GREEN when ALL sensors are closed (ready to arm)
Flashes ORANGE when ANY sensor is open (not ready to arm)
Flashes RED while system is armed
For voice communication
with the Central Station
Shows all system information, status,
programming, and functions as the keypad
Display cycles clock, calendar, and weather
(press to manually change)
Sounds all system local alarms,
voice prompts, system sounds, and
audio for 2-way voice communications
with the Central Station
Sensor Status
Arming Status
Alarm Memory
Power Outage
2GIG-CP2

5
Wireless Sensors
Your security system has wireless sensors. Some sensors will be visible, other
sensors are hidden inside the door jambs. Depending on your installation,
there may be other types of sensors shown below. Be sure your installer
shows you all the sensors installed in your system.
Motion Sensor
Smoke Detector
Key Fob Remote
Wireless Keypad
Door / Window Sensor
Glass Break Sensor
Panic Button Remote
Wireless Touch Screen Keypad

6
Main Display Screens
The Home Screen
The Arming Screen
The Menu Screen
The Status Screen
The Control Panel is programmed and operated
using the color touch-screen display. The
display will show various buttons, indicators,
and text to guide and inform you.
The top bar on the display shows the current
system mode, scrolling text of any pending
alerts, and system status icons for AC power,
telephone line, and backup battery.
Home Screen
The Home Screen is the top level screen. It
shows the system status with icons to indicate
system conditions. It also displays the time
and date. The Home Screen has SECURITY,
SERVICES, Silent Control and Display Off
buttons. (Note: Services is a system option for
controlling Z-Wave devices, if not active, the
button will not be displayed. Refer to the Z-Wave
manual for details.) Pressing the button on
the Control Panel will display the Home Screen.
Security Screen
The Security Screen shows the system status
and offers three buttons for ARM, MENU, and
STATUS. It also displays the time and date. If
messages, alarm, or trouble alerts are pending,
the Security Screen will display buttons
indicating the number of pending messages.
Arming Screen
The Arming Screen is used to arm the security
portion of the system. It displays the system
status and arming buttons for STAY and
AWAY. An option check box for ENTRY DELAY
and a Silent Control button are displayed.
Menu Screen
The Menu Screen shows the system status
and offers buttons for ARM and TOOLBOX. If
the emergency option is set, an EMERGENCY
button is displayed. Two option check box
buttons for CHIME and VOICE are displayed.
Status Screen
The Status Screen lists system status and any
alerts. The date and time of any alerts are
listed in the displayed log. One option button
for SILENCE is displayed; it stops the voice
announcement of the system status.
The Security Screen
Trouble Alert
Alarm Memory
MessageSilent Control
Display Off
Silent Control
Silent Control

7
Burglary Protection
Operating the System
When your system was setup by your installer, wireless sensors were placed to monitor specific
doors and windows. The installer selected these doors and windows as likely places where an
unlawful intrusion might occur and could be detected. Each sensor was programmed to have the
system react in a specific way.
Some sensor types such as smoke detectors, carbon monoxide detectors, panic buttons, etc. are
always active and can trigger an alarm at any time. Other sensors on protected doors and windows
are part of the burglary protection part of the system, and can be turned on or off. Turning on the
burglary protection part of the security system is called “Arming the System”. The burglary
protection part of the system can be armed in two modes: Stay Mode or Away Mode.
Refer to the floor plan below. It shows a typical residential installation and the various types of
wireless sensors and their function.
Example Security System Floor Plan
CP
GARAGE
ES
DW
PIR
CP - CONTROL PANEL
DW - DOOR/WINDOW SENSOR
PIR - MOTION DETECTOR
SMKE - SMOKE DETECTOR
CO - CARBON MONOXIDE DETECTOR
GB - GLASS BREAK SENSOR
PAD - WIRELESS KEYPAD
ES - EXTERNAL SIREN
LIVING
DINING
KITCHEN
ENTRY
BED
BATH DEN
GB
SMKE
GB
BED
PAD
CO
DWDW
DW
DW
DW
DW
DW
DW
DW
SMKE
PIR
DW
DW
DW
FRONT AND SIDE DOOR SENSORS
HAVE EXIT/ENTRY DELAY
SMKE
SIDE AND MAIN GARAGE
DOOR SENSORS HAVE
EXIT/ENTRY DELAY

8
Burglary Protection
Sensor Status
The security system constantly monitors all of the sensors attached to the protected doors and
windows in your home or business. The Control Panel knows if each protected door or window
is open or closed. The open or closed condition of the protected doors and windows is called the
“sensor status”.
For maximum security, all the doors and windows on the premises should be closed when leaving
the building. In some cases, such as when using the security system for protection when staying
at home, it may be desirable to leave some protected doors or windows open. The system uses
“bypasses” to resolve the open door or window conditions. Before the system can be armed, all
protected doors and windows must be closed or bypassed. Bypasses and their two types are
explained in detail on the next page.
Checking that All Sensors are Closed
In most cases, you will be arming the security system with all of the sensor-protected doors and
windows closed. The Control Panel provides several easy ways to verify that all the sensor-protected
doors and windows are closed before arming the system.
• Thebuttonwill light green when all perimeter sensors are closed. Thebuttonwill not be
lit if ANY perimeter sensoris open. Open interiorsensors do not change this indication.
• TheSECURITY buttononthedisplay’sHome Screen will light green when all perimeter sensors
are closed. TheSECURITY buttonwill be lit orange if ANY perimeter sensoris open. Open
interiorsensors do not change this indication.
• TheARM buttononthedisplay’sSecurityScreen and Menu Screen will light green when all
perimeter sensors are closed. If any interiorsensors are open (orwhen any motiondetectoris
triggered), ahouse iconis displayed onthestatus bar. TheARM buttonwill be lit orange if ANY
perimeter sensoris open.
Viewing Each Sensor’s Status
The Control Panel will also show you which sensor-protected doors and windows are open. Your
installer has programmed descriptive names for each sensor-protected door and window. The Control
Panel’s color display will show the names of which door and windows are open.
• Thetoparea of thedisplay ontheHome, Security, and Menu Screens will list any sensors that
are currentlyopen.
• Pressing theSTATUS buttonwill also display alist of all open sensors along with general system
status and alerts.
THE HOME BUTTON LIGHTSGREEN WHEN ALL
PERIMETERSENSORS ARE CLOSED. THE
HOME BUTTON WILL NOT BE LIT IF ANY
PERIMETERSENSORISOPEN
THE STATUSBARSHOWSTHE SYSTEM MODE
AND WHAT SENSORS ARE OPEN
THE ARM BUTTON ON THE SECURITY AND
MENU SCREENSLIGHTSGREEN WHEN ALL
PERIMETERSENSORS ARE CLOSED. THE
ARM BUTTON WILL LIGHT ORANGE IF
ANY PERIMETERSENSORISOPEN
THE STATUSBARWILL
DISPLAY THE HOUSE
ICON IF ANY INTERIOR
SENSORISOPEN