gofanco Switcher3P User manual

3-Port HDMI Switcher 4K
- Black
G4-0026A
®
P/N: Switcher3P

2
Congratulationsforowningagofancoproduct.Ourproducts
aim to meet all your connectivity needs wherever you go.
Have fun with our products!
Please read this manual carefully before first use.
If you need more information about our products, please
visit www.gofanco.com.
For technical support, please email us at support@gofanco.
com.
For drivers/manuals download, please go to http:// www.
gofanco.com/download.

3
Introduction
gofanco 3-Port HDMI Switcher 4K - Black (part# Switcher3P)
allows any of the 3 HDMI sources to be displayed on one
HDMI display and supports ultra-high resolution up to 4K.
Specifications
Package Contents
• 3- Port HDMI Switcher 4K - Black
• Power cable
• IR remote control
• IR Receiver Extension cable
• User's guide
Spec. HDMI v1.4
Compliance HDCP 1.4, 36-bit deep Color, 3D
Video bandwidth 10.2Gbps
Video support 480p, 720p, 1080i, 1080p@60Hz, 4Kx2K (3840x2160 @60Hz)
Audio support Dolby-trueHD, DTS-HD master audio 7.1-channel
Connectors Input: HDMI x 3
Output: HDMI x 1
Transmission distance
(4Kx2K @60Hz)
Input: 5m (Max.) for HDMI standard cable_26AWG
Output: 5m (Max.) for HDMI standard cable_26AWG
Power cable DC 5V/0.5A
Dimensions 7.48" (W) x 2.34" (H) x 3.42" (D)
Weight 0.13lbs

4
Layout
HDM output
Power plug
Switch
HDMI inputs
Figure 2: 3-Port HDMI Switcher 4K - Black
•Input LEDs: On when input signals are detected
•Switch: Select input source 1, 2, or 3
•HDMI output: Connects to an HDMI display or TV
•Power plug: Connects to the included power cable
•IR port: Plug IR receiver extension cable here
Figure 1: 3-Port HDMI Switcher 4K - Black
IR port
Input LEDs
•HDMI inputs: Connect to HDMI source devices

5
IR Remote Control
Figure 3: IR Remote Control
Input Select Button
Next
•Input Select Button: Select input source 1, 2 or 3
•Next: Select the next input source
Figure 4: IR Receiver Extension cable

6
Hardware Installation
1. Power off all source devices and displays.
2. Connect up to 3 HDMI source devices to the switcher's
HDMI input ports using HDMI cables (cables not
included).
3. Connect your HDMI display to the switcher's HDMI
Output with an HDMl cable (cable not included).
4. Connect the included power cable to the switcher's
power plug and plug it into one of your systems' USB port.
Note: This power connection is OPTIONAL but
recommended for a more stable performance.
5. Power on all of the connected devices.
6. The switcher is now ready for use.

7
Blank page

®
Thank you for choosing gofanco
www.gofanco.com