gofanco Switcher5p User manual

5-Port HDMI Switcher 4K - Black
G4-0025A
®
P/N: Switcher5p

2
Congratulationsforowningagofancoproduct.Ourproducts
aim to meet all your connectivity needs wherever you go.
Have fun with our products!
Please read this manual carefully before first use.
If you need more information about our products, please
visit www.gofanco.com.
For technical support, please email us at support@gofanco.
com.
For drivers/manuals download, please go to http:// www.
gofanco.com/download.

3
Introduction
gofanco 5-Port HDMI Switcher 4K - Black (part# Switcher5P)
allows any of the 5 HDMI sources to be displayed on one
HDMI display and supports ultra-high resolution up to 4K.
Package Contents
• 5-Port HDMI Switcher 4K - Black
• Power Adapter
• IR remote control
• User's guide
Specifications
Spec. HDMI v1.4
Compliance HDCP 1.4, 36-bit deep Color, 3D
Video Bandwidth 10.2Gbps
Video support 480p, 720p, 1080i, 1080p@60Hz, 4Kx2K (3840x2160 @60Hz YUV 4:2:0)
Audio support Dolby-trueHD, DTS-HD master audio
Connectors Input: HDMI x 5
Output: HDMI x 1
Transmission distance
(4Kx2K @60Hz)
Input: 5m (Max.) for HDMI standard cable_26AWG
Output: 10m (Max.) for HDMI standard cable_26AWG
Power adapter DC 5V/1A
Dimensions 4.52" (W) x 0.98" (H) x 2.44" (D)
Weight 0.28lbs

4
Layout
Power plug
HDMI output
Output LED
IR Receiver
Source Selection
Power LED
HDMl inputs
Figure 2: 5-Port HDMI Switcher 4K - Black
Figure 1: 5-Port HDMI Switcher 4K - Black
•Power LED: On when the unit is powered
•Source Selection: Press to select the input source
(Input 1, 2, 3, 4 or 5)
•IR Receiver: Receive IR signal from the remote control
•Input LEDs: On when input signals are detected
•Output LED: On when the output signal is detected
•HDMI Output: Connect to an HDMI display or TV
HDMI input
Input LEDs
•Power plug: Power adapter plug
•HDMI Inputs (x5): Connect to HDMI source devices

5
IR Remote Control
Figure 3: IR Remote Control
Previous Next
Input Select Button
•Previous: Select the previous input source
•Next: Select the next input source
•Input Select Button (1-5): Select input source 1, 2, 3 ,4
or 5

6
Hardware Installation
1. Power off all source devices and displays.
2. Connect up to 5 HDMI source devices to the switcher's
HDMIinput ports using HDMI cables(cables not included).
3. Connect your HDMI display to the switcher's HDMI
Output with an HDMl cable (cable not included).
4. Connect the included power adapter to the switcher's
Power plug and plug it into a reliable power outlet.
5. Power on all of the connected devices.
6. The switcher is now ready for use.

7
Blank page

®
Thank you for choosing gofanco
www.gofanco.com