Goodmans GMC01 User manual

USER MANUAL
MODEL:GMC01
Bluetooth CD Micro System

Welcome1
2
3
4
5
6
7
Quick Setup
Features
Troubleshooting
Technical Specifications
Customer Support
Your Bluetooth CD Micro System
Using the CD Player
Using the FM Radio
Using Bluetooth
Connectiong External Devices
Other Function
2.1 Front
2.2 Back
2.3 Controls
2.4 Remote Control
3.1 Setting Up
3.2 Using the Remote Cont rol
3.3 Setting the Clock
4.1 CD Operation
4.2 Play/Pause
4.3 Stop
4.4 Previous Track/Next Track
4.6 FM Radio Operation
4.7 Scanning for Radio Stations
4.9 USB Operation
4.10 AUX Operation
4.11 Sleep Function
4.12 Alarm Clock
4.8 Bluetooth Operation
4.5 Repeat Track/Repeat All/Random

Welcome1
Your Bluetooth CD Micro System2
Thank you for choosing this Goodmans product. We’ve been
making electronics for the British people for 70 years. Each of
our projects has been carefully designed to be great at what
it does and this one is no exception. We hope you enjoy your
new Bluetooth CD Micro System.
Front2.1
A B C D
A
B
C
D
A
Speakers Display Window
Remote Control Sensor
CD Compartment
GMC01

POWER FUNC STOP M+/PMODE
PLAY/PAUSE
USB AUX
TUNE+/SKIP+TUNE-/SKIP- DC 5V 500mA
Back2.2
Controls2.3
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
POWER. Turns the CD Micro System on and off.
FUNC. Changes the mode.
TUNE-/SKIP-. Scan backwards (FM mode) or skip to previous track (CD mode).
TUNE+/SKIP+. Scan forwards (FM mode) or skip to next track (CD mode).
PLAY/PAUSE.
STOP.
M+/PMODE. Skip to next memory slot (FM mode). Switches between repeat current track,
repeat all tracks, random and off (CD mode).
USB Socket. For connecting USB devices.
AUX Socket. For connecting MP3 players or other devices using a phono cable (not supplied).
DC-in Socket Stand
GMC01

Keys
SLEEP.
.
Remote Control2.4
Turns the CD Micro System on and off.
TUNE-/SKIP-. Scan backwards(FM mode)
or skip to previous track(CD
mode).
.
.
Stop.
Play/Pause.
Switches sleep mode on or off and
sets the amount of time before the
CD Micro System goes to sleep.
MONO. Switches between mono and stereo.
MEM. Enter current station in memory (FM
mode).
M+. Skip to next memory slot (FM mode).
MUTE. Switch sound off or on.
VOL-. Reduce the volume.
VOL+. Increase the volume.
M-. Skip to previous memory slot (FM mode).
TUNE+/SKIP+. Scan forwards (FM mode) or
skip to next track (CD mode).
FUNC. Changes the mode.
PMODE. Switches between repeat current
track, repeat all tracks, random
and off (CD mode).
GMC01

Quick Setup3
Setting up3.1
1. Unbox your CD Micro System and check that you have all the components.
3. Unbox your CD Micro System and check that you have all the components.
2. Line the projections on the base up with the holes in the bottom of the CD Micro System and
push in until they click.
6. Open the CD cover and carefully remove and discard the white card tab from inside the CD
compartment.
4. Unwind and extend the aerial.
5. Remove all transparent protection film from the player.
Using the Remote Control3.2
Setting the Clock3.3
9. Connect the mains power adaptor to the mains power supply.
Your CD Micro System is now ready for use.
7. If there is a protective strip in the battery compartment, remove it before using the remote
control.
8. Connect the mains power adaptor to the DC-in socket.
To use the remote control, point it towards the sensor at the front of the CD Micro System.
1. With the CD Micro System in standby, press and hold the FUNC button until the display
2. (Optional) Press the TUNE-/SKIP- or TUNE+/SKIP+ button to switch between 24H and
12H display.
flashes 24H. Release the FUNC button.
The remote control will work up to 6 metres from the CD Micro System and at an angle of up to
30 degrees.
Do not block the path of the beam from the remote control to the CD Micro System.
3. Press the FUNC button. The time is displayed with the hours flashing.
4. Press the TUNE-/SKIP- or TUNE+/SKIP+ button to set the hours value.
5. Press the FUNC button. The time is displayed with the minutes flashing.
6. Press the TUNE-/SKIP- or TUNE+/SKIP+ button to set the minutes value.
7. Press the FUNC button. The clock displays the selected time.
Note: Sunlight or very bright light will reduce the remote control sensitivity.
GMC01

Features4
Using the CD Player
CD Operation
1. Open the disc cover and carefully insert a CD (label side facing up) until it clicks into place.
2. Close the disc cover. If the CD Micro System is in CD mode, the CD will begin playing
automatically.
3. If the CD Micro System is not in CD mode, press the FUNC button until you reach CD mode.
The CD will then begin playing automatically.
Previous Track/Next Track
While playing a disc, press the TUNE+/SKIP+ button to skip to the beginning of the next
track (if you are at the final track, it will stop playback).
While playing a disc, press the TUNE-/SKIP- button to skip back to the beginning of the
previous track (if you are at the first track, it will stop playback).
Repeat Track/Repeat All/Random
While playing a disc, press the PMODE button to repeat the current track. When the current
track finishes, the CD Micro System will play it again.
Press the PMODE button again to repeat all tracks. When the CD finishes, the CD Micro System
will play it again from the first track.
Press the PMODE button again to switch to random selection. When the current track finishes,
the CD Micro System will randomly select any track on the CD to play.
STOP
While playing a track, press the STOP button to stop the playback. If you then press the
PLAY/PAUSE button, the CD will play from the beginning.
Play/Pause
While playing a track, press the PLAY/PAUSE button to pause the playback. Press the
PLAY/PAUSE button again to resume the playback.
GMC01
4.1
4.2
4.3
4.4
4.5

FM Radio Operation
1. If the CD Micro System is not in FM radio mode, press the FUNC button until you reach
FM mode.
2. If you have radio stations stored in memory, use the M+ and M- buttons to select the
required station.
Using the FM Radio
Before using the FM radio, you must first extend the aerial (a vertical position is recommended).
This ensures that the maximum signal strength is available when the radio begins to scan.
Extending the aerial also ensures the best possible sound quality.
3. If you do not have radio stations stored in memory, use the TUNE-/SKIP- or TUNE+/SKIP+
buttons to locate the required station.
Scanning for Radio Stations
1. Press and hold the TUNE+/SKIP+ button to begin scanning. The CD Micro System will
scan until it finds a signal.
2. To discard the station and resume the scan, press the TUNE+/SKIP+ button again.
3. To store the station in memory, press the MEM button. The first empty memory memory
slot is displayed.
4. (Optional) Use the M+ and M- buttons to select a memory slot. There are 20 memory slots
in your CD Micro System.
5. Press the MEM button to store the station.
GMC01
4.6
4.7

Using Bluetooth
Bluetooth Operation
If you have a Bluetooth-enabled device (e.g. mobile phone), you can play music tracks from it
through the CD Micro System.
2. Turn on the Bluetooth function on your device.
If you are playing music through a phone and you receive a call, the music will stop automatically.
When the call ends, it depends on your phone’s settings whether the current track will resume
playback or not.
GMC01
Note:
Some devices connect immediately after pairing, while some may take longer to
complete the connection. The Mini Stereo System can only be connected and playing content
from one Bluetooth device at a time. To connect to a different paired device, turn off Bluetooth
or unpair from the currently paired device and manually connect to the other device.
3. Place your device in Bluetooth search mode.
4. Select GMC01 from the list of found devices.
5. Select OK or YES to pair the unit with your Bluetooth device.
The playback operation is controlled by your Bluetooth device and the buttons on the remote
control or on the control panel of the CD Micro System.
4.8

GMC01
USB Operation
The USB slot can be used for music playback from USB pen drives or MP3 players using a
USB cable (not supplied).
1. Connect your USB device to the CD Micro System.
Connecting External Devices
2. If the CD Micro System is not in external mode, press the FUNC button until you reach
external mode.
The AUX in port can be used for music playback from MP3 players or other devices using a
phono cable (not supplied).
1. Connect your device to the CD Micro System.
2. If the CD Micro System is not in external mode, press the FUNC button until you reach
external mode.
3. If required, switch on your device.
The playback operation is controlled by your device and the buttons on the remote control or
on the control panel of the CD Micro System.
If you have connected a USB device, such as an MP3 player, the playback operation is
controlled by your USB device and the buttons on the remote control or on the control panel
of the CD Micro System.
If you have connected a USB pen drive, the playback operation is controlled by the buttons on
the remote control or on the control panel of the CD Micro System.
Note: Due to variance in MP3 encoding and digital music formats some MP3 players may not
play via the USB port. If this is the case, connect your MP3 player to the AUX port using a
phono cable (not supplied).
3. If required, switch on your USB device.
4.9
4.10 AUX Operation